--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 Marek Vasut <marex@denx.de>
+ */
+
+#include <common.h>
+#include <asm-generic/gpio.h>
+#include <asm-generic/sections.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <common.h>
+#include <dm/uclass.h>
+#include <hang.h>
+#include <i2c_eeprom.h>
+#include <image.h>
+#include <init.h>
+#include <net.h>
+#include <spl.h>
+
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
+
+u8 dmo_get_memcfg(void)
+{
+ struct gpio_desc gpio[4];
+ u8 memcfg = 0;
+ ofnode node;
+ int i, ret;
+
+ node = ofnode_path("/config");
+ if (!ofnode_valid(node)) {
+ printf("%s: no /config node?\n", __func__);
+ return BIT(2) | BIT(0);
+ }
+
+ ret = gpio_request_list_by_name_nodev(node,
+ "dmo,ram-coding-gpios",
+ gpio, ARRAY_SIZE(gpio),
+ GPIOD_IS_IN);
+ for (i = 0; i < ret; i++)
+ memcfg |= !!dm_gpio_get_value(&(gpio[i])) << i;
+
+ gpio_free_list_nodev(gpio, ret);
+
+ return memcfg;
+}
+
+int board_phys_sdram_size(phys_size_t *size)
+{
+ u8 memcfg = dmo_get_memcfg();
+
+ *size = (4ULL >> ((memcfg >> 1) & 0x3)) * SZ_1G;
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+static void data_modul_imx_edm_sbc_early_init_f(const iomux_v3_cfg_t wdog_pad)
+{
+ struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+ imx_iomux_v3_setup_pad(wdog_pad | MUX_PAD_CTRL(WDOG_PAD_CTRL));
+
+ set_wdog_reset(wdog);
+}
+
+__weak int data_modul_imx_edm_sbc_board_power_init(void)
+{
+ return 0;
+}
+
+static void spl_dram_init(struct dram_timing_info *dram_timing_info[8])
+{
+ u8 memcfg = dmo_get_memcfg();
+ int i;
+
+ printf("DDR: %d GiB x%d [0x%x]\n",
+ /* 0..4 GiB, 1..2 GiB, 0..1 GiB */
+ 4 >> ((memcfg >> 1) & 0x3),
+ /* 0..x32, 1..x16 */
+ 32 >> (memcfg & BIT(0)),
+ memcfg);
+
+ if (!dram_timing_info[memcfg]) {
+ printf("Unsupported DRAM strapping, trying lowest supported. MEMCFG=0x%x\n",
+ memcfg);
+ for (i = 7; i >= 0; i--)
+ if (dram_timing_info[i]) /* Configuration found */
+ break;
+ }
+
+ ddr_init(dram_timing_info[memcfg]);
+}
+
+void dmo_board_init_f(const iomux_v3_cfg_t wdog_pad,
+ struct dram_timing_info *dram_timing_info[8])
+{
+ struct udevice *dev;
+ int ret;
+
+ icache_enable();
+
+ arch_cpu_init();
+
+ init_uart_clk(2);
+
+ data_modul_imx_edm_sbc_early_init_f(wdog_pad);
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ ret = spl_early_init();
+ if (ret) {
+ debug("spl_early_init() failed: %d\n", ret);
+ hang();
+ }
+
+ preloader_console_init();
+
+ ret = uclass_get_device_by_name(UCLASS_CLK,
+ "clock-controller@30380000",
+ &dev);
+ if (ret < 0) {
+ printf("Failed to find clock node. Check device tree\n");
+ hang();
+ }
+
+ enable_tzc380();
+
+ data_modul_imx_edm_sbc_board_power_init();
+
+ /* DDR initialization */
+ spl_dram_init(dram_timing_info);
+
+ board_init_r(NULL, 0);
+}
+#else
+void dmo_setup_boot_device(void)
+{
+ int boot_device = get_boot_device();
+ char *devnum;
+
+ devnum = env_get("devnum");
+ if (devnum) /* devnum is already set */
+ return;
+
+ if (boot_device == MMC3_BOOT) /* eMMC */
+ env_set_ulong("devnum", 0);
+ else
+ env_set_ulong("devnum", 1);
+}
+
+void dmo_setup_mac_address(void)
+{
+ unsigned char enetaddr[6];
+ struct udevice *dev;
+ int off, ret;
+
+ ret = eth_env_get_enetaddr("ethaddr", enetaddr);
+ if (ret) /* ethaddr is already set */
+ return;
+
+ off = fdt_path_offset(gd->fdt_blob, "eeprom0");
+ if (off < 0) {
+ printf("%s: No eeprom0 path offset\n", __func__);
+ return;
+ }
+
+ ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev);
+ if (ret) {
+ printf("Cannot find EEPROM!\n");
+ return;
+ }
+
+ ret = i2c_eeprom_read(dev, 0xb0, enetaddr, 0x6);
+ if (ret) {
+ printf("Error reading configuration EEPROM!\n");
+ return;
+ }
+
+ if (is_valid_ethaddr(enetaddr))
+ eth_env_set_enetaddr("ethaddr", enetaddr);
+}
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022 Marek Vasut <marex@denx.de>
+ */
+
+#ifndef __EDM_SBC_COMMON_H__
+#define __EDM_SBC_COMMON_H__
+
+#include <asm/arch/ddr.h>
+#include <asm/mach-imx/iomux-v3.h>
+
+u8 dmo_get_memcfg(void);
+void dmo_board_init_f(const iomux_v3_cfg_t wdog_pad,
+ struct dram_timing_info *dram_timing_info[8]);
+void dmo_setup_boot_device(void);
+void dmo_setup_mac_address(void);
+
+#endif /* __EDM_SBC_COMMON_H__ */
obj-y += imx8mm_data_modul_edm_sbc.o
endif
-obj-y += common.o
+obj-y += ../common/common.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2022 Marek Vasut <marex@denx.de>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm-generic/gpio.h>
-
-#include "lpddr4_timing.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-u8 dmo_get_memcfg(void)
-{
- struct gpio_desc gpio[4];
- u8 memcfg = 0;
- ofnode node;
- int i, ret;
-
- node = ofnode_path("/config");
- if (!ofnode_valid(node)) {
- printf("%s: no /config node?\n", __func__);
- return BIT(2) | BIT(0);
- }
-
- ret = gpio_request_list_by_name_nodev(node,
- "dmo,ram-coding-gpios",
- gpio, ARRAY_SIZE(gpio),
- GPIOD_IS_IN);
- for (i = 0; i < ret; i++)
- memcfg |= !!dm_gpio_get_value(&(gpio[i])) << i;
-
- gpio_free_list_nodev(gpio, ret);
-
- return memcfg;
-}
#include <common.h>
#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
#include <asm/io.h>
-#include <asm/mach-imx/boot_mode.h>
#include <dm.h>
#include <dm/device-internal.h>
-#include <i2c_eeprom.h>
#include <malloc.h>
-#include <net.h>
#include <spl.h>
-#include "lpddr4_timing.h"
+#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
-int board_phys_sdram_size(phys_size_t *size)
-{
- u8 memcfg = dmo_get_memcfg();
-
- *size = (4ULL >> ((memcfg >> 1) & 0x3)) * SZ_1G;
-
- return 0;
-}
-
-static void setup_mac_address(void)
-{
- unsigned char enetaddr[6];
- struct udevice *dev;
- int off, ret;
-
- ret = eth_env_get_enetaddr("ethaddr", enetaddr);
- if (ret) /* ethaddr is already set */
- return;
-
- off = fdt_path_offset(gd->fdt_blob, "eeprom0");
- if (off < 0) {
- printf("%s: No eeprom0 path offset\n", __func__);
- return;
- }
-
- ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev);
- if (ret) {
- printf("Cannot find EEPROM!\n");
- return;
- }
-
- ret = i2c_eeprom_read(dev, 0xb0, enetaddr, 0x6);
- if (ret) {
- printf("Error reading configuration EEPROM!\n");
- return;
- }
-
- if (is_valid_ethaddr(enetaddr))
- eth_env_set_enetaddr("ethaddr", enetaddr);
-}
-
-static void setup_boot_device(void)
-{
- int boot_device = get_boot_device();
- char *devnum;
-
- devnum = env_get("devnum");
- if (devnum) /* devnum is already set */
- return;
-
- if (boot_device == MMC3_BOOT) /* eMMC */
- env_set_ulong("devnum", 0);
- else
- env_set_ulong("devnum", 1);
-}
-
int board_init(void)
{
return 0;
struct udevice *dev;
int ret;
- setup_boot_device();
- setup_mac_address();
+ dmo_setup_boot_device();
+ dmo_setup_mac_address();
ret = uclass_get_device_by_name(UCLASS_MISC, "usb-hub@2c", &dev);
if (ret)
extern struct dram_timing_info dmo_imx8mm_sbc_dram_timing_16_32;
extern struct dram_timing_info dmo_imx8mm_sbc_dram_timing_32_32;
-u8 dmo_get_memcfg(void);
-
#endif /* __LPDDR4_TIMING_H__ */
#include "lpddr4_timing.h"
-DECLARE_GLOBAL_DATA_PTR;
-
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static const iomux_v3_cfg_t wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
+#include "../common/common.h"
-static void data_modul_imx8mm_edm_sbc_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-}
+DECLARE_GLOBAL_DATA_PTR;
-static int data_modul_imx8mm_edm_sbc_board_power_init(void)
+int data_modul_imx_edm_sbc_board_power_init(void)
{
struct udevice *dev;
int ret;
NULL, /* INVALID */
};
-static void spl_dram_init(void)
-{
- u8 memcfg = dmo_get_memcfg();
- int i;
-
- printf("DDR: %d GiB x%d [0x%x]\n",
- /* 0..4 GiB, 1..2 GiB, 0..1 GiB */
- 4 >> ((memcfg >> 1) & 0x3),
- /* 0..x32, 1..x16 */
- 32 >> (memcfg & BIT(0)),
- memcfg);
-
- if (!dram_timing_info[memcfg]) {
- printf("Unsupported DRAM strapping, trying lowest supported. MEMCFG=0x%x\n",
- memcfg);
- for (i = ARRAY_SIZE(dram_timing_info) - 1; i >= 0; i--)
- if (dram_timing_info[i]) /* Configuration found */
- break;
- }
-
- ddr_init(dram_timing_info[memcfg]);
-}
-
void board_init_f(ulong dummy)
{
- struct udevice *dev;
- int ret;
-
- icache_enable();
-
- arch_cpu_init();
-
- init_uart_clk(2);
-
- data_modul_imx8mm_edm_sbc_early_init_f();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- ret = spl_early_init();
- if (ret) {
- debug("spl_early_init() failed: %d\n", ret);
- hang();
- }
-
- preloader_console_init();
-
- ret = uclass_get_device_by_name(UCLASS_CLK,
- "clock-controller@30380000",
- &dev);
- if (ret < 0) {
- printf("Failed to find clock node. Check device tree\n");
- hang();
- }
-
- enable_tzc380();
-
- data_modul_imx8mm_edm_sbc_board_power_init();
-
- /* DDR initialization */
- spl_dram_init();
-
- board_init_r(NULL, 0);
+ dmo_board_init_f(IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B, dram_timing_info);
}
projects / platform / kernel / u-boot.git / commitdiff