m68k: code reformatting for all start.S files

This patch is style-related only, to reformat all the start.S code,
actually not following a coherent style inside single files and
between different cpu start.S files.

Linux format has been respected, as
  - max line width at 80 columns
  - one 8 cols tab between asm instructions and operands
  - inline comments, where any, fixed at col 41

Signed-off-by: Angelo Dureghello <angelo@sysam.it>

diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S
index 13c036f..b5d51bd 100644 (file)
--- a/arch/m68k/cpu/mcf5227x/start.S
+++ b/arch/m68k/cpu/mcf5227x/start.S
@@ -28,52 +28,37 @@
        rte;
 
 #if defined(CONFIG_CF_SBF)
-#define ASM_DRAMINIT   (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
-#define ASM_SBF_IMG_HDR        (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_DRAMINIT   (asm_dram_init - CONFIG_SYS_TEXT_BASE + \
+       CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR        (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + \
+       CONFIG_SYS_INIT_RAM_ADDR)
 #endif
 
 .text
+
 /*
- *     Vector table. This is used for initial platform startup.
- *     These vectors are to catch any un-intended traps.
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
  */
 _vectors:
-
 #if defined(CONFIG_CF_SBF)
-INITSP:                .long   0               /* Initial SP   */
-INITPC:                .long   ASM_DRAMINIT    /* Initial PC   */
+INITSP:        .long   0                       /* Initial SP   */
+INITPC:        .long   ASM_DRAMINIT            /* Initial PC   */
 #else
-INITSP:                .long   0       /* Initial SP   */
-INITPC:                .long   _START  /* Initial PC           */
+INITSP:        .long   0                       /* Initial SP   */
+INITPC:        .long   _START                  /* Initial PC   */
 #endif
 
-vector02:      .long   _FAULT  /* Access Error         */
-vector03:      .long   _FAULT  /* Address Error        */
-vector04:      .long   _FAULT  /* Illegal Instruction  */
-vector05:      .long   _FAULT  /* Reserved             */
-vector06:      .long   _FAULT  /* Reserved             */
-vector07:      .long   _FAULT  /* Reserved             */
-vector08:      .long   _FAULT  /* Privilege Violation  */
-vector09:      .long   _FAULT  /* Trace                */
-vector0A:      .long   _FAULT  /* Unimplemented A-Line */
-vector0B:      .long   _FAULT  /* Unimplemented F-Line */
-vector0C:      .long   _FAULT  /* Debug Interrupt      */
-vector0D:      .long   _FAULT  /* Reserved             */
-vector0E:      .long   _FAULT  /* Format Error         */
-vector0F:      .long   _FAULT  /* Unitialized Int.     */
+vector02_0F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 /* Reserved */
 vector10_17:
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
-vector18:      .long   _FAULT  /* Spurious Interrupt   */
-vector19:      .long   _FAULT  /* Autovector Level 1   */
-vector1A:      .long   _FAULT  /* Autovector Level 2   */
-vector1B:      .long   _FAULT  /* Autovector Level 3   */
-vector1C:      .long   _FAULT  /* Autovector Level 4   */
-vector1D:      .long   _FAULT  /* Autovector Level 5   */
-vector1E:      .long   _FAULT  /* Autovector Level 6   */
-vector1F:      .long   _FAULT  /* Autovector Level 7   */
+vector18_1F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 #if !defined(CONFIG_CF_SBF)
 /* TRAP #0 - #15 */
@@ -120,15 +105,16 @@ vector192_255:
 #if defined(CONFIG_CF_SBF)
        /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */
 asm_sbf_img_hdr:
-       .long   0x00000000      /* checksum, not yet implemented */
-       .long   0x00020000      /* image length */
+       .long   0x00000000              /* checksum, not yet implemented */
+       .long   0x00020000              /* image length */
        .long   CONFIG_SYS_TEXT_BASE    /* image to be relocated at */
 
 asm_dram_init:
        move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
-       movec   %d0, %RAMBAR1   /* init Rambar */
+       movec   %d0, %RAMBAR1           /* init Rambar */
+
        move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
-       clr.l %sp@-
+       clr.l   %sp@-
 
        /* Must disable global address */
        move.l  #0xFC008000, %a1
@@ -142,7 +128,6 @@ asm_dram_init:
         * Dram Initialization
         * a1, a2, and d0
         */
-       /* mscr sdram */
        move.l  #0xFC0A4074, %a1
        move.b  #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
        nop
@@ -336,15 +321,15 @@ asm_dspi_rd_status:
 
        move.b  (%a3), %d1
        rts
-#endif                 /* CONFIG_CF_SBF */
+#endif /* CONFIG_CF_SBF */
 
-       .text
+.text
        . = 0x400
-       .globl  _start
+.globl _start
 _start:
        nop
        nop
-       move.w #0x2700,%sr              /* Mask off Interrupt */
+       move.w  #0x2700,%sr             /* Mask off Interrupt */
 
        /* Set vector base register at the beginning of the Flash */
 #if defined(CONFIG_CF_SBF)
@@ -366,17 +351,17 @@ _start:
        movec   %d0, %ACR1
 
        /* initialize general use internal ram */
-       move.l #0, %d0
-       move.l #(ICACHE_STATUS), %a1    /* icache */
-       move.l #(DCACHE_STATUS), %a2    /* icache */
-       move.l %d0, (%a1)
-       move.l %d0, (%a2)
+       move.l  #0, %d0
+       move.l  #(ICACHE_STATUS), %a1   /* icache */
+       move.l  #(DCACHE_STATUS), %a2   /* icache */
+       move.l  %d0, (%a1)
+       move.l  %d0, (%a2)
 
        /* put relocation table address to a5 */
-       move.l #__got_start, %a5
+       move.l  #__got_start, %a5
 
        /* setup stack initially on top of internal static ram  */
-       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
 
        /*
         * if configured, malloc_f arena will be reserved first,
@@ -386,20 +371,23 @@ _start:
        bsr     board_init_f_alloc_reserve
 
        /* update stack and frame-pointers */
-       move.l  %d0, %sp
-       move.l  %sp, %fp
+       move.l  %d0, %sp
+       move.l  %sp, %fp
 
        /* initialize reserved area */
-       move.l  %d0, -(%sp)
-       bsr     board_init_f_init_reserve
+       move.l  %d0, -(%sp)
+       bsr     board_init_f_init_reserve
+
+       /* run low-level CPU init code (from flash) */
+       bsr     cpu_init_f
+       clr.l   %sp@-
 
-       bsr cpu_init_f                  /* run low-level CPU init code (from flash) */
-       clr.l   %sp@-
-       bsr board_init_f                /* run low-level board init code (from flash) */
+       /* run low-level board init code (from flash) */
+       bsr     board_init_f
 
        /* board_init_f() does not return */
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
@@ -412,23 +400,23 @@ _start:
  * r5 = length in bytes
  * r6 = cachelinesize
  */
-       .globl  relocate_code
+.globl relocate_code
 relocate_code:
-       link.w %a6,#0
-       move.l 8(%a6), %sp              /* set new stack pointer */
+       link.w  %a6,#0
+       move.l  8(%a6), %sp             /* set new stack pointer */
 
-       move.l 12(%a6), %d0             /* Save copy of Global Data pointer */
-       move.l 16(%a6), %a0             /* Save copy of Destination Address */
+       move.l  12(%a6), %d0            /* Save copy of Global Data pointer */
+       move.l  16(%a6), %a0            /* Save copy of Destination Address */
 
-       move.l #CONFIG_SYS_MONITOR_BASE, %a1
-       move.l #__init_end, %a2
-       move.l %a0, %a3
+       move.l  #CONFIG_SYS_MONITOR_BASE, %a1
+       move.l  #__init_end, %a2
+       move.l  %a0, %a3
 
        /* copy the code to RAM */
 1:
-       move.l (%a1)+, (%a3)+
-       cmp.l  %a1,%a2
-       bgt.s    1b
+       move.l  (%a1)+, (%a3)+
+       cmp.l   %a1,%a2
+       bgt.s   1b
 
 /*
  * We are done. Do not return, instead branch to second part of board
@@ -458,7 +446,7 @@ clear_bss:
         */
        move.l  %a0, %a1
        add.l   #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
-       move.l  %a1,%a5                 /* * fix got pointer register a5 */
+       move.l  %a1,%a5                 /* fix got pointer register a5 */
 
        move.l  %a0, %a2
        add.l   #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
@@ -472,39 +460,40 @@ clear_bss:
        bne     7b
 
        /* calculate relative jump to board_init_r in ram */
-       move.l %a0, %a1
-       add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
+       move.l  %a0, %a1
+       add.l   #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
        /* set parameters for board_init_r */
-       move.l %a0,-(%sp)               /* dest_addr */
-       move.l %d0,-(%sp)               /* gd */
+       move.l  %a0,-(%sp)              /* dest_addr */
+       move.l  %d0,-(%sp)              /* gd */
        jsr     (%a1)
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
+
 /* exception code */
-       .globl _fault
+.globl _fault
 _fault:
-       bra _fault
-       .globl  _exc_handler
+       bra     _fault
 
+.globl _exc_handler
 _exc_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr exc_handler
+       bsr     exc_handler
        addql   #4,%sp
        RESTORE_ALL
 
-       .globl  _int_handler
+.globl _int_handler
 _int_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr int_handler
+       bsr     int_handler
        addql   #4,%sp
        RESTORE_ALL
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
-       .globl  version_string
+.globl version_string
 version_string:
-       .ascii U_BOOT_VERSION_STRING, "\0"
-       .align 4
+.ascii U_BOOT_VERSION_STRING, "\0"
+.align 4

diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S
index 3aa4dd6..c4f6082 100644 (file)
--- a/arch/m68k/cpu/mcf523x/start.S
+++ b/arch/m68k/cpu/mcf523x/start.S
@@ -28,41 +28,25 @@
        rte;
 
 .text
+
 /*
- *     Vector table. This is used for initial platform startup.
- *     These vectors are to catch any un-intended traps.
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
  */
 _vectors:
+INITSP:        .long   0x00000000              /* Initial SP   */
+INITPC:        .long   _START                  /* Initial PC   */
 
-INITSP:                .long   0x00000000      /* Initial SP   */
-INITPC:                .long   _START  /* Initial PC           */
-vector02:      .long   _FAULT  /* Access Error         */
-vector03:      .long   _FAULT  /* Address Error        */
-vector04:      .long   _FAULT  /* Illegal Instruction  */
-vector05:      .long   _FAULT  /* Reserved             */
-vector06:      .long   _FAULT  /* Reserved             */
-vector07:      .long   _FAULT  /* Reserved             */
-vector08:      .long   _FAULT  /* Privilege Violation  */
-vector09:      .long   _FAULT  /* Trace                */
-vector0A:      .long   _FAULT  /* Unimplemented A-Line */
-vector0B:      .long   _FAULT  /* Unimplemented F-Line */
-vector0C:      .long   _FAULT  /* Debug Interrupt      */
-vector0D:      .long   _FAULT  /* Reserved             */
-vector0E:      .long   _FAULT  /* Format Error         */
-vector0F:      .long   _FAULT  /* Unitialized Int.     */
+vector02_0F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 /* Reserved */
 vector10_17:
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
-vector18:      .long   _FAULT  /* Spurious Interrupt   */
-vector19:      .long   _FAULT  /* Autovector Level 1   */
-vector1A:      .long   _FAULT  /* Autovector Level 2   */
-vector1B:      .long   _FAULT  /* Autovector Level 3   */
-vector1C:      .long   _FAULT  /* Autovector Level 4   */
-vector1D:      .long   _FAULT  /* Autovector Level 5   */
-vector1E:      .long   _FAULT  /* Autovector Level 6   */
-vector1F:      .long   _FAULT  /* Autovector Level 7   */
+vector18_1F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 /* TRAP #0 - #15 */
 vector20_2F:
@@ -104,13 +88,13 @@ vector192_255:
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
-       .text
+.text
 
-       .globl  _start
+.globl _start
 _start:
        nop
        nop
-       move.w #0x2700,%sr      /* Mask off Interrupt */
+       move.w  #0x2700,%sr             /* Mask off Interrupt */
 
        /* Set vector base register at the beginning of the Flash */
        move.l  #CONFIG_SYS_FLASH_BASE, %d0
@@ -120,22 +104,22 @@ _start:
        movec   %d0, %RAMBAR1
 
        /* invalidate and disable cache */
-       move.l  #CF_CACR_CINV, %d0              /* Invalidate cache cmd */
-       movec   %d0, %CACR                      /* Invalidate cache */
+       move.l  #CF_CACR_CINV, %d0      /* Invalidate cache cmd */
+       movec   %d0, %CACR              /* Invalidate cache */
        nop
        move.l  #0, %d0
        movec   %d0, %ACR0
        movec   %d0, %ACR1
 
        /* initialize general use internal ram */
-       move.l #0, %d0
-       move.l #(ICACHE_STATUS), %a1    /* icache */
-       move.l #(DCACHE_STATUS), %a2    /* icache */
-       move.l %d0, (%a1)
-       move.l %d0, (%a2)
+       move.l  #0, %d0
+       move.l  #(ICACHE_STATUS), %a1   /* icache */
+       move.l  #(DCACHE_STATUS), %a2   /* icache */
+       move.l  %d0, (%a1)
+       move.l  %d0, (%a2)
 
        /* put relocation table address to a5 */
-       move.l #__got_start, %a5
+       move.l  #__got_start, %a5
 
        /* setup stack initially on top of internal static ram  */
        move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
@@ -149,25 +133,26 @@ _start:
        jsr     (%a1)
 
        /* update stack and frame-pointers */
-       move.l  %d0, %sp
-       move.l  %sp, %fp
+       move.l  %d0, %sp
+       move.l  %sp, %fp
 
        /* initialize reserved area */
-       move.l  %d0, -(%sp)
+       move.l  %d0, -(%sp)
        move.l  #board_init_f_init_reserve, %a1
        jsr     (%a1)
 
        /* run low-level CPU init code (from flash) */
-       move.l #cpu_init_f, %a1
-       jsr (%a1)
+       move.l  #cpu_init_f, %a1
+       jsr     (%a1)
+
        /* run low-level board init code (from flash) */
-       clr.l   %sp@-
-       move.l #board_init_f, %a1
-       jsr (%a1)
+       clr.l   %sp@-
+       move.l  #board_init_f, %a1
+       jsr     (%a1)
 
        /* board_init_f() does not return */
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
@@ -180,23 +165,23 @@ _start:
  * r5 = length in bytes
  * r6 = cachelinesize
  */
-       .globl  relocate_code
+.globl relocate_code
 relocate_code:
-       link.w %a6,#0
-       move.l 8(%a6), %sp              /* set new stack pointer */
+       link.w  %a6,#0
+       move.l  8(%a6), %sp             /* set new stack pointer */
 
-       move.l 12(%a6), %d0             /* Save copy of Global Data pointer */
-       move.l 16(%a6), %a0             /* Save copy of Destination Address */
+       move.l  12(%a6), %d0            /* Save copy of Global Data pointer */
+       move.l  16(%a6), %a0            /* Save copy of Destination Address */
 
-       move.l #CONFIG_SYS_MONITOR_BASE, %a1
-       move.l #__init_end, %a2
-       move.l %a0, %a3
+       move.l  #CONFIG_SYS_MONITOR_BASE, %a1
+       move.l  #__init_end, %a2
+       move.l  %a0, %a3
 
        /* copy the code to RAM */
 1:
-       move.l (%a1)+, (%a3)+
-       cmp.l  %a1,%a2
-       bgt.s    1b
+       move.l  (%a1)+, (%a3)+
+       cmp.l   %a1,%a2
+       bgt.s   1b
 
 /*
  * We are done. Do not return, instead branch to second part of board
@@ -240,39 +225,40 @@ clear_bss:
        bne     7b
 
        /* calculate relative jump to board_init_r in ram */
-       move.l %a0, %a1
-       add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
+       move.l  %a0, %a1
+       add.l   #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
        /* set parameters for board_init_r */
-       move.l %a0,-(%sp)               /* dest_addr */
-       move.l %d0,-(%sp)               /* gd */
+       move.l  %a0,-(%sp)              /* dest_addr */
+       move.l  %d0,-(%sp)              /* gd */
        jsr     (%a1)
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
+
 /* exception code */
-       .globl _fault
+.globl _fault
 _fault:
-       bra _fault
-       .globl  _exc_handler
+       bra     _fault
 
+.globl _exc_handler
 _exc_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr exc_handler
+       bsr     exc_handler
        addql   #4,%sp
        RESTORE_ALL
 
-       .globl  _int_handler
+.globl _int_handler
 _int_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr int_handler
+       bsr     int_handler
        addql   #4,%sp
        RESTORE_ALL
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
-       .globl  version_string
+.globl version_string
 version_string:
-       .ascii U_BOOT_VERSION_STRING, "\0"
-       .align 4
+.ascii U_BOOT_VERSION_STRING, "\0"
+.align 4

diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S
index a048884..9837c41 100644 (file)
--- a/arch/m68k/cpu/mcf52x2/start.S
+++ b/arch/m68k/cpu/mcf52x2/start.S
@@ -34,12 +34,12 @@
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
 
 .text
+
 /*
- *     Vector table. This is used for initial platform startup.
- *     These vectors are to catch any un-intended traps.
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
  */
 _vectors:
-
 .long  0x00000000              /* Flash offset is 0 until we setup CS0 */
 #if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 .long  _start - CONFIG_SYS_TEXT_BASE
@@ -85,24 +85,24 @@ _vectors:
 
 #endif
 
-       .text
-
+.text
 
 #if defined(CONFIG_SYS_INT_FLASH_BASE) && \
     (defined(CONFIG_M5282) || defined(CONFIG_M5281))
-       #if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-               .long   0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */
-               .long   0xFFFFFFFF /* all sectors protected */
-               .long   0x00000000 /* supervisor/User restriction */
-               .long   0x00000000 /* programm/data space restriction */
-               .long   0x00000000 /* Flash security */
-       #endif
+#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+.long  0x55AA55AA,0xAA55AA55           /* CFM Backdoorkey */
+.long  0xFFFFFFFF                      /* all sectors protected */
+.long  0x00000000                      /* supervisor/User restriction */
+.long  0x00000000                      /* programm/data space restriction */
+.long  0x00000000                      /* Flash security */
 #endif
-       .globl  _start
+#endif
+
+.globl _start
 _start:
        nop
        nop
-       move.w #0x2700,%sr
+       move.w  #0x2700,%sr
 
 #if defined(CONFIG_M5208)
        /* Initialize RAMBAR: locate SRAM and validate it */
@@ -111,22 +111,24 @@ _start:
 #endif
 
 #if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253)
-       move.l  #(CONFIG_SYS_MBAR + 1), %d0             /* set MBAR address + valid flag */
+       /* set MBAR address + valid flag */
+       move.l  #(CONFIG_SYS_MBAR + 1), %d0
        move.c  %d0, %MBAR
 
        /*** The 5249 has MBAR2 as well ***/
 #ifdef CONFIG_SYS_MBAR2
-       move.l  #(CONFIG_SYS_MBAR2 + 1), %d0            /* Get MBAR2 address */
-       movec   %d0, #0xc0e                     /* Set MBAR2 */
+       /* Get MBAR2 address */
+       move.l  #(CONFIG_SYS_MBAR2 + 1), %d0
+        /* Set MBAR2 */
+       movec   %d0, #0xc0e
 #endif
-
        move.l  #(CONFIG_SYS_INIT_RAM_ADDR + 1), %d0
        movec   %d0, %RAMBAR0
 #endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */
 
 #if defined(CONFIG_M5282) || defined(CONFIG_M5271)
-       /* Initialize IPSBAR */
-       move.l  #(CONFIG_SYS_MBAR + 1), %d0             /* set IPSBAR address + valid flag */
+       /* set MBAR address + valid flag */
+       move.l  #(CONFIG_SYS_MBAR + 1), %d0
        move.l  %d0, 0x40000000
 
        /* Initialize RAMBAR1: locate SRAM and validate it */
@@ -135,22 +137,24 @@ _start:
 
 #if defined(CONFIG_M5282)
 #if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-       /* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */
-
-       move.l #(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0
-       move.l #(_flashbar_setup_end-CONFIG_SYS_INT_FLASH_BASE), %a1
-       move.l #(CONFIG_SYS_INIT_RAM_ADDR), %a2
+       /*
+        * Setup code in SRAM to initialize FLASHBAR,
+        * if start from internal Flash
+        */
+       move.l  #(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0
+       move.l  #(_flashbar_setup_end-CONFIG_SYS_INT_FLASH_BASE), %a1
+       move.l  #(CONFIG_SYS_INIT_RAM_ADDR), %a2
 _copy_flash:
-       move.l (%a0)+, (%a2)+
-       cmp.l %a0, %a1
-       bgt.s _copy_flash
-       jmp CONFIG_SYS_INIT_RAM_ADDR
+       move.l  (%a0)+, (%a2)+
+       cmp.l   %a0, %a1
+       bgt.s   _copy_flash
+       jmp     CONFIG_SYS_INIT_RAM_ADDR
 
 _flashbar_setup:
        /* Initialize FLASHBAR: locate internal Flash and validate it */
        move.l  #(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
        movec   %d0, %FLASHBAR
-       jmp _after_flashbar_copy.L      /* Force jump to absolute address */
+       jmp     _after_flashbar_copy.L  /* Force jump to absolute address */
 _flashbar_setup_end:
        nop
 _after_flashbar_copy:
@@ -162,7 +166,8 @@ _after_flashbar_copy:
 
 #endif
 #endif
-       /* if we come from a pre-loader we have no exception table and
+       /*
+        * if we come from a pre-loader we have no exception table and
         * therefore no VBR to set
         */
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
@@ -175,8 +180,8 @@ _after_flashbar_copy:
 #endif
 
 #ifdef CONFIG_M5275
-       /* Initialize IPSBAR */
-       move.l  #(CONFIG_SYS_MBAR + 1), %d0             /* set IPSBAR address + valid flag */
+       /* set MBAR address + valid flag */
+       move.l  #(CONFIG_SYS_MBAR + 1), %d0
        move.l  %d0, 0x40000000
 /*     movec   %d0, %MBAR */
 
@@ -186,17 +191,17 @@ _after_flashbar_copy:
 #endif
 
        /* initialize general use internal ram */
-       move.l #0, %d0
-       move.l #(ICACHE_STATUS), %a1    /* icache */
-       move.l #(DCACHE_STATUS), %a2    /* icache */
-       move.l %d0, (%a1)
-       move.l %d0, (%a2)
+       move.l  #0, %d0
+       move.l  #(ICACHE_STATUS), %a1   /* icache */
+       move.l  #(DCACHE_STATUS), %a2   /* icache */
+       move.l  %d0, (%a1)
+       move.l  %d0, (%a2)
 
        /* put relocation table address to a5 */
-       move.l #__got_start, %a5
+       move.l  #__got_start, %a5
 
        /* setup stack initially on top of internal static ram  */
-       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
 
        /*
         * if configured, malloc_f arena will be reserved first,
@@ -204,28 +209,29 @@ _after_flashbar_copy:
         */
        move.l  %sp, -(%sp)
        move.l  #board_init_f_alloc_reserve, %a1
-       jsr (%a1)
+       jsr     (%a1)
 
        /* update stack and frame-pointers */
-       move.l  %d0, %sp
-       move.l  %sp, %fp
+       move.l  %d0, %sp
+       move.l  %sp, %fp
 
        /* initialize reserved area */
-       move.l  %d0, -(%sp)
+       move.l  %d0, -(%sp)
        move.l  #board_init_f_init_reserve, %a1
-       jsr (%a1)
+       jsr     (%a1)
 
        /* run low-level CPU init code (from flash) */
-       move.l #cpu_init_f, %a1
-       jsr (%a1)
+       move.l  #cpu_init_f, %a1
+       jsr     (%a1)
+
        /* run low-level board init code (from flash) */
-       clr.l   %sp@-
-       move.l #board_init_f, %a1
-       jsr (%a1)
+       clr.l   %sp@-
+       move.l  #board_init_f, %a1
+       jsr     (%a1)
 
        /* board_init_f() does not return */
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
@@ -238,22 +244,22 @@ _after_flashbar_copy:
  * r5 = length in bytes
  * r6 = cachelinesize
  */
-       .globl  relocate_code
+.globl relocate_code
 relocate_code:
-       link.w %a6,#0
-       move.l 8(%a6), %sp              /* set new stack pointer */
+       link.w  %a6,#0
+       move.l  8(%a6), %sp             /* set new stack pointer */
 
-       move.l 12(%a6), %d0             /* Save copy of Global Data pointer */
-       move.l 16(%a6), %a0             /* Save copy of Destination Address */
+       move.l  12(%a6), %d0            /* Save copy of Global Data pointer */
+       move.l  16(%a6), %a0            /* Save copy of Destination Address */
 
-       move.l #CONFIG_SYS_MONITOR_BASE, %a1
-       move.l #__init_end, %a2
-       move.l %a0, %a3
+       move.l  #CONFIG_SYS_MONITOR_BASE, %a1
+       move.l  #__init_end, %a2
+       move.l  %a0, %a3
        /* copy the code to RAM */
 1:
-       move.l (%a1)+, (%a3)+
-       cmp.l  %a1,%a2
-       bgt.s    1b
+       move.l  (%a1)+, (%a3)+
+       cmp.l   %a1,%a2
+       bgt.s   1b
 
 /*
  * We are done. Do not return, instead branch to second part of board
@@ -283,7 +289,7 @@ clear_bss:
         */
        move.l  %a0, %a1
        add.l   #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
-       move.l  %a1,%a5         /* * fix got pointer register a5 */
+       move.l  %a1,%a5                 /* fix got pointer register a5 */
 
        move.l  %a0, %a2
        add.l   #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
@@ -297,43 +303,44 @@ clear_bss:
        bne     7b
 
        /* calculate relative jump to board_init_r in ram */
-       move.l %a0, %a1
-       add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
+       move.l  %a0, %a1
+       add.l   #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
        /* set parameters for board_init_r */
-       move.l %a0,-(%sp)               /* dest_addr */
-       move.l %d0,-(%sp)               /* gd */
+       move.l  %a0,-(%sp)              /* dest_addr */
+       move.l  %d0,-(%sp)              /* gd */
 #if defined(DEBUG) && (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) && \
     defined(CONFIG_SYS_HALT_BEFOR_RAM_JUMP)
        halt
 #endif
        jsr     (%a1)
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
+
 /* exception code */
-       .globl _fault
+.globl _fault
 _fault:
-       bra _fault
+       bra     _fault
 
-       .globl  _exc_handler
+.globl _exc_handler
 _exc_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr exc_handler
+       bsr     exc_handler
        addql   #4,%sp
        RESTORE_ALL
 
-       .globl  _int_handler
+.globl _int_handler
 _int_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr int_handler
+       bsr     int_handler
        addql   #4,%sp
        RESTORE_ALL
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
-       .globl  version_string
+.globl version_string
 version_string:
-       .ascii U_BOOT_VERSION_STRING, "\0"
-       .align 4
+.ascii U_BOOT_VERSION_STRING, "\0"
+.align 4

diff --git a/arch/m68k/cpu/mcf530x/start.S b/arch/m68k/cpu/mcf530x/start.S
index ca8bb32..da41c9a 100644 (file)
--- a/arch/m68k/cpu/mcf530x/start.S
+++ b/arch/m68k/cpu/mcf530x/start.S
@@ -36,12 +36,12 @@
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
 
 .text
+
 /*
- *     Vector table. This is used for initial platform startup.
- *     These vectors are to catch any un-intended traps.
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
  */
 _vectors:
-
 /* Flash offset is 0 until we setup CS0 */
 .long  0x00000000
 #if defined(CONFIG_M5307) && \
@@ -89,12 +89,13 @@ _vectors:
 
 #endif
 
-       .text
-       .globl  _start
+.text
+
+.globl _start
 _start:
        nop
        nop
-       move.w  #0x2700,%sr
+       move.w  #0x2700,%sr
 
        /* set MBAR address + valid flag */
        move.l  #(CONFIG_SYS_MBAR + 1), %d0
@@ -104,11 +105,11 @@ _start:
        move.c  %d0, %RAMBAR
 
        /* DS 4.8.2 (Cache Organization) invalidate and disable cache */
-        move.l  #CF_CACR_CINVA, %d0
-        movec   %d0, %CACR
-        move.l  #0, %d0
-        movec   %d0, %ACR0
-        movec   %d0, %ACR1
+        move.l #CF_CACR_CINVA, %d0
+        movec  %d0, %CACR
+        move.l #0, %d0
+        movec  %d0, %ACR0
+        movec  %d0, %ACR1
 
        /*
         * if we come from a pre-loader we have no exception table and
@@ -127,10 +128,10 @@ _start:
        move.l  %d0, (%a2)
 
        /* put relocation table address to a5 */
-       move.l #__got_start, %a5
+       move.l  #__got_start, %a5
 
        /* setup stack initially on top of internal static ram  */
-       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
 
        /*
         * if configured, malloc_f arena will be reserved first,
@@ -140,23 +141,23 @@ _start:
        bsr     board_init_f_alloc_reserve
 
        /* update stack and frame-pointers */
-       move.l  %d0, %sp
-       move.l  %sp, %fp
+       move.l  %d0, %sp
+       move.l  %sp, %fp
 
        /* initialize reserved area */
-       move.l  %d0, -(%sp)
-       bsr     board_init_f_init_reserve
+       move.l  %d0, -(%sp)
+       bsr     board_init_f_init_reserve
 
        /* run low-level CPU init code (from flash) */
-       bsr cpu_init_f
+       bsr     cpu_init_f
 
        /* run low-level board init code (from flash) */
-       clr.l   %sp@-
-       bsr board_init_f
+       clr.l   %sp@-
+       bsr     board_init_f
 
        /* board_init_f() does not return */
 
-/*--------------------------------------------------------------------------*/
+/******************************************************************************/
 
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
@@ -165,7 +166,7 @@ _start:
  * after relocating the monitor code.
  *
  */
-       .globl  relocate_code
+.globl relocate_code
 relocate_code:
        link.w  %a6,#0
        move.l  8(%a6), %sp     /* set new stack pointer */
@@ -209,7 +210,8 @@ clear_bss:
         */
        move.l  %a0, %a1
        add.l   #(__got_start - CONFIG_SYS_MONITOR_BASE), %a1
-       /* * fix got pointer register a5 */
+
+       /* fix got pointer register a5 */
        move.l  %a1,%a5
 
        move.l  %a0, %a2
@@ -236,33 +238,34 @@ clear_bss:
 #endif
        jsr     (%a1)
 
-/*--------------------------------------------------------------------------*/
+/******************************************************************************/
+
 /* exception code */
-       .globl _fault
+.globl _fault
 _fault:
        bra     _fault
 
-       .globl  _exc_handler
+.globl _exc_handler
 _exc_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr     exc_handler
+       bsr     exc_handler
        addql   #4,%sp
        RESTORE_ALL
 
-       .globl  _int_handler
+.globl _int_handler
 _int_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr     int_handler
+       bsr     int_handler
        addql   #4,%sp
        RESTORE_ALL
 
-/*--------------------------------------------------------------------------*/
+/******************************************************************************/
 
-       .globl  version_string
+.globl version_string
 version_string:
-       .ascii  U_BOOT_VERSION
-       .ascii  " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
-       .ascii  CONFIG_IDENT_STRING, "\0"
-       .align  4
+.ascii U_BOOT_VERSION
+.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+.ascii CONFIG_IDENT_STRING, "\0"
+.align 4

diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S
index f25bc54..302fca5 100644 (file)
--- a/arch/m68k/cpu/mcf532x/start.S
+++ b/arch/m68k/cpu/mcf532x/start.S
@@ -31,42 +31,27 @@
        rte;
 
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
+
 .text
+
 /*
- *     Vector table. This is used for initial platform startup.
- *     These vectors are to catch any un-intended traps.
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
  */
 _vectors:
+INITSP:        .long   0x00000000              /* Initial SP   */
+INITPC:        .long   _START                  /* Initial PC           */
 
-INITSP:                .long   0x00000000      /* Initial SP   */
-INITPC:                .long   _START  /* Initial PC           */
-vector02:      .long   _FAULT  /* Access Error         */
-vector03:      .long   _FAULT  /* Address Error        */
-vector04:      .long   _FAULT  /* Illegal Instruction  */
-vector05:      .long   _FAULT  /* Reserved             */
-vector06:      .long   _FAULT  /* Reserved             */
-vector07:      .long   _FAULT  /* Reserved             */
-vector08:      .long   _FAULT  /* Privilege Violation  */
-vector09:      .long   _FAULT  /* Trace                */
-vector0A:      .long   _FAULT  /* Unimplemented A-Line */
-vector0B:      .long   _FAULT  /* Unimplemented F-Line */
-vector0C:      .long   _FAULT  /* Debug Interrupt      */
-vector0D:      .long   _FAULT  /* Reserved             */
-vector0E:      .long   _FAULT  /* Format Error         */
-vector0F:      .long   _FAULT  /* Unitialized Int.     */
+vector02_0F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 /* Reserved */
 vector10_17:
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
-vector18:      .long   _FAULT  /* Spurious Interrupt   */
-vector19:      .long   _FAULT  /* Autovector Level 1   */
-vector1A:      .long   _FAULT  /* Autovector Level 2   */
-vector1B:      .long   _FAULT  /* Autovector Level 3   */
-vector1C:      .long   _FAULT  /* Autovector Level 4   */
-vector1D:      .long   _FAULT  /* Autovector Level 5   */
-vector1E:      .long   _FAULT  /* Autovector Level 6   */
-vector1F:      .long   _FAULT  /* Autovector Level 7   */
+vector18_1F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 /* TRAP #0 - #15 */
 vector20_2F:
@@ -109,13 +94,13 @@ vector192_255:
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 #endif /* !defined(CONFIG_MONITOR_IS_IN_RAM) */
 
-       .text
+.text
 
-       .globl  _start
+.globl _start
 _start:
        nop
        nop
-       move.w #0x2700,%sr      /* Mask off Interrupt */
+       move.w  #0x2700,%sr     /* Mask off Interrupt */
 
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
        /* Set vector base register at the beginning of the Flash */
@@ -142,14 +127,14 @@ _start:
 #endif
 
        /* initialize general use internal ram */
-       move.l #0, %d0
-       move.l #(ICACHE_STATUS), %a1    /* icache */
-       move.l #(DCACHE_STATUS), %a2    /* icache */
-       move.l %d0, (%a1)
-       move.l %d0, (%a2)
+       move.l  #0, %d0
+       move.l  #(ICACHE_STATUS), %a1   /* icache */
+       move.l  #(DCACHE_STATUS), %a2   /* icache */
+       move.l  %d0, (%a1)
+       move.l  %d0, (%a2)
 
        /* put relocation table address to a5 */
-       move.l #__got_start, %a5
+       move.l  #__got_start, %a5
 
        /* setup stack initially on top of internal static ram  */
        move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
@@ -167,13 +152,14 @@ _start:
        move.l  %sp, %fp
 
        /* initialize reserved area */
-       move.l  %d0, -(%sp)
+       move.l  %d0, -(%sp)
        move.l  #board_init_f_init_reserve, %a1
        jsr     (%a1)
 
        /* run low-level CPU init code (from flash) */
-       move.l #cpu_init_f, %a1
-       jsr (%a1)
+       move.l  #cpu_init_f, %a1
+       jsr     (%a1)
+
        /* run low-level board init code (from flash) */
        clr.l   %sp@-
        move.l #board_init_f, %a1
@@ -181,7 +167,7 @@ _start:
 
        /* board_init_f() does not return */
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
@@ -194,23 +180,23 @@ _start:
  * r5 = length in bytes
  * r6 = cachelinesize
  */
-       .globl  relocate_code
+.globl relocate_code
 relocate_code:
-       link.w %a6,#0
-       move.l 8(%a6), %sp              /* set new stack pointer */
+       link.w  %a6,#0
+       move.l  8(%a6), %sp             /* set new stack pointer */
 
-       move.l 12(%a6), %d0             /* Save copy of Global Data pointer */
-       move.l 16(%a6), %a0             /* Save copy of Destination Address */
+       move.l  12(%a6), %d0            /* Save copy of Global Data pointer */
+       move.l  16(%a6), %a0            /* Save copy of Destination Address */
 
-       move.l #CONFIG_SYS_MONITOR_BASE, %a1
-       move.l #__init_end, %a2
-       move.l %a0, %a3
+       move.l  #CONFIG_SYS_MONITOR_BASE, %a1
+       move.l  #__init_end, %a2
+       move.l  %a0, %a3
 
        /* copy the code to RAM */
 1:
-       move.l (%a1)+, (%a3)+
-       cmp.l  %a1,%a2
-       bgt.s    1b
+       move.l  (%a1)+, (%a3)+
+       cmp.l   %a1,%a2
+       bgt.s   1b
 
 /*
  * We are done. Do not return, instead branch to second part of board
@@ -240,7 +226,7 @@ clear_bss:
         */
        move.l  %a0, %a1
        add.l   #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
-       move.l  %a1,%a5         /* * fix got pointer register a5 */
+       move.l  %a1,%a5                 /* fix got pointer register a5 */
 
        move.l  %a0, %a2
        add.l   #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
@@ -254,38 +240,40 @@ clear_bss:
        bne     7b
 
        /* calculate relative jump to board_init_r in ram */
-       move.l %a0, %a1
-       add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
+       move.l  %a0, %a1
+       add.l   #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
        /* set parameters for board_init_r */
-       move.l %a0,-(%sp)               /* dest_addr */
-       move.l %d0,-(%sp)               /* gd */
+       move.l  %a0,-(%sp)              /* dest_addr */
+       move.l  %d0,-(%sp)              /* gd */
        jsr     (%a1)
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
+
 /* exception code */
-       .globl _fault
+.globl _fault
 _fault:
        bra _fault
-       .globl  _exc_handler
 
+.globl _exc_handler
 _exc_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr exc_handler
+       bsr     exc_handler
        addql   #4,%sp
        RESTORE_ALL
 
-       .globl  _int_handler
+.globl _int_handler
 _int_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr int_handler
+       bsr     int_handler
        addql   #4,%sp
        RESTORE_ALL
 
-/*------------------------------------------------------------------------------*/
-       .globl  version_string
+/******************************************************************************/
+
+.globl version_string
 version_string:
-       .ascii U_BOOT_VERSION_STRING, "\0"
-       .align 4
+.ascii U_BOOT_VERSION_STRING, "\0"
+.align 4

diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S
index ba38678..bc48ca0 100644 (file)
--- a/arch/m68k/cpu/mcf5445x/start.S
+++ b/arch/m68k/cpu/mcf5445x/start.S
@@ -33,62 +33,47 @@
        rte;
 
 #if defined(CONFIG_SERIAL_BOOT)
-#define ASM_DRAMINIT   (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_DRAMINIT   (asm_dram_init - CONFIG_SYS_TEXT_BASE + \
+       CONFIG_SYS_INIT_RAM_ADDR)
 #define ASM_DRAMINIT_N (asm_dram_init - CONFIG_SYS_TEXT_BASE)
-#define ASM_SBF_IMG_HDR        (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR        (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + \
+       CONFIG_SYS_INIT_RAM_ADDR)
 #endif
 
 .text
 
 /*
- *     Vector table. This is used for initial platform startup.
- *     These vectors are to catch any un-intended traps.
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
  */
 _vectors:
 #if defined(CONFIG_SERIAL_BOOT)
 
-INITSP:        .long   0               /* Initial SP   */
+INITSP:        .long   0                       /* Initial SP   */
 #ifdef CONFIG_CF_SBF
-INITPC:        .long   ASM_DRAMINIT    /* Initial PC   */
+INITPC:        .long   ASM_DRAMINIT            /* Initial PC   */
 #endif
 #ifdef CONFIG_SYS_NAND_BOOT
-INITPC:        .long   ASM_DRAMINIT_N  /* Initial PC   */
+INITPC:        .long   ASM_DRAMINIT_N          /* Initial PC   */
 #endif
 
 #else
 
-INITSP:                .long   0       /* Initial SP   */
-INITPC:                .long   _START  /* Initial PC           */
+INITSP:        .long   0                       /* Initial SP   */
+INITPC:        .long   _START                  /* Initial PC   */
 
 #endif
 
-vector02:      .long   _FAULT  /* Access Error         */
-vector03:      .long   _FAULT  /* Address Error        */
-vector04:      .long   _FAULT  /* Illegal Instruction  */
-vector05:      .long   _FAULT  /* Reserved             */
-vector06:      .long   _FAULT  /* Reserved             */
-vector07:      .long   _FAULT  /* Reserved             */
-vector08:      .long   _FAULT  /* Privilege Violation  */
-vector09:      .long   _FAULT  /* Trace                */
-vector0A:      .long   _FAULT  /* Unimplemented A-Line */
-vector0B:      .long   _FAULT  /* Unimplemented F-Line */
-vector0C:      .long   _FAULT  /* Debug Interrupt      */
-vector0D:      .long   _FAULT  /* Reserved             */
-vector0E:      .long   _FAULT  /* Format Error         */
-vector0F:      .long   _FAULT  /* Unitialized Int.     */
+vector02_0F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 /* Reserved */
 vector10_17:
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
-vector18:      .long   _FAULT  /* Spurious Interrupt   */
-vector19:      .long   _FAULT  /* Autovector Level 1   */
-vector1A:      .long   _FAULT  /* Autovector Level 2   */
-vector1B:      .long   _FAULT  /* Autovector Level 3   */
-vector1C:      .long   _FAULT  /* Autovector Level 4   */
-vector1D:      .long   _FAULT  /* Autovector Level 5   */
-vector1E:      .long   _FAULT  /* Autovector Level 6   */
-vector1F:      .long   _FAULT  /* Autovector Level 7   */
+vector18_1F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 #if !defined(CONFIG_SERIAL_BOOT)
 
@@ -136,12 +121,12 @@ vector192_255:
 #if defined(CONFIG_SERIAL_BOOT)
        /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */
 asm_sbf_img_hdr:
-       .long   0x00000000      /* checksum, not yet implemented */
-       .long   0x00040000      /* image length */
+       .long   0x00000000              /* checksum, not yet implemented */
+       .long   0x00040000              /* image length */
        .long   CONFIG_SYS_TEXT_BASE    /* image to be relocated at */
 
 asm_dram_init:
-       move.w #0x2700,%sr              /* Mask off Interrupt */
+       move.w  #0x2700,%sr             /* Mask off Interrupt */
 
 #ifdef CONFIG_SYS_NAND_BOOT
        /* for assembly stack */
@@ -149,7 +134,7 @@ asm_dram_init:
        movec   %d0, %RAMBAR1
 
        move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
-       clr.l %sp@-
+       clr.l   %sp@-
 #endif
 
 #ifdef CONFIG_CF_SBF
@@ -160,11 +145,11 @@ asm_dram_init:
        movec   %d0, %RAMBAR1
 
        /* initialize general use internal ram */
-       move.l #0, %d0
-       move.l #(ICACHE_STATUS), %a1    /* icache */
-       move.l #(DCACHE_STATUS), %a2    /* dcache */
-       move.l %d0, (%a1)
-       move.l %d0, (%a2)
+       move.l  #0, %d0
+       move.l  #(ICACHE_STATUS), %a1   /* icache */
+       move.l  #(DCACHE_STATUS), %a2   /* dcache */
+       move.l  %d0, (%a1)
+       move.l  %d0, (%a2)
 
        /* invalidate and disable cache */
        move.l  #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0
@@ -176,7 +161,7 @@ asm_dram_init:
        movec   %d0, %ACR3
 
        move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
-       clr.l %sp@-
+       clr.l   %sp@-
 
        /* Must disable global address */
        move.l  #0xFC008000, %a1
@@ -185,7 +170,7 @@ asm_dram_init:
        move.l  #(CONFIG_SYS_CS0_CTRL), (%a1)
        move.l  #0xFC008004, %a1
        move.l  #(CONFIG_SYS_CS0_MASK), (%a1)
-#endif                 /* CONFIG_CF_SBF */
+#endif /* CONFIG_CF_SBF */
 
 #ifdef CONFIG_MCF5441x
        /* TC: enable all peripherals,
@@ -193,9 +178,9 @@ asm_dram_init:
        move.l  #0xFC04002D, %a1
 
 #if defined(CONFIG_CF_SBF)
-       move.b  #23, (%a1)      /* dspi */
+       move.b  #23, (%a1)              /* dspi */
 #endif
-       move.b  #46, (%a1)      /* DDR */
+       move.b  #46, (%a1)              /* DDR */
 
        /* slew settings */
        move.l  #0xEC094060, %a1
@@ -365,7 +350,7 @@ dramsz_loop:
 
        move.l  #2000, %d1
        jsr     asm_delay
-#endif         /* CONFIG_MCF5445x */
+#endif /* CONFIG_MCF5445x */
 
 #ifdef CONFIG_CF_SBF
        /*
@@ -484,7 +469,7 @@ asm_dspi_rd_status:
 
        move.b  (%a3), %d1
        rts
-#endif                 /* CONFIG_CF_SBF */
+#endif /* CONFIG_CF_SBF */
 
 #ifdef CONFIG_SYS_NAND_BOOT
        /* copy 4 boot pages to dram as soon as possible */
@@ -509,13 +494,13 @@ asm_nand_init:
        move.l  %d1, (%a1)
 
        /* initialize general use internal ram */
-       move.l #0, %d0
-       move.l #(CACR_STATUS), %a1      /* CACR */
-       move.l #(ICACHE_STATUS), %a2    /* icache */
-       move.l #(DCACHE_STATUS), %a3    /* dcache */
-       move.l %d0, (%a1)
-       move.l %d0, (%a2)
-       move.l %d0, (%a3)
+       move.l  #0, %d0
+       move.l  #(CACR_STATUS), %a1     /* CACR */
+       move.l  #(ICACHE_STATUS), %a2   /* icache */
+       move.l  #(DCACHE_STATUS), %a3   /* dcache */
+       move.l  %d0, (%a1)
+       move.l  %d0, (%a2)
+       move.l  %d0, (%a3)
 
        /* invalidate and disable cache */
        move.l  #0x01004100, %d0        /* Invalidate cache cmd */
@@ -571,7 +556,7 @@ asm_nand_init:
        move.l  #4, %d2                 /* start at 4 */
        move.l  #0xFC0FFF04, %a0        /* cmd2 */
        move.l  #0xFC0FFF0C, %a1        /* rar */
-       move.l  #(CONFIG_SYS_TEXT_BASE + 0xF80), %a2    /* dst */
+       move.l  #(CONFIG_SYS_TEXT_BASE + 0xF80), %a2
 
 asm_nand_read:
        move.l  #0x11000000, %d0        /* rar */
@@ -621,14 +606,14 @@ asm_delay:
        rts
 #endif                 /* CONFIG_CF_SBF || CONFIG_NAND_U_BOOT */
 
-       .text
+.text
        . = 0x400
-       .globl  _start
+.globl _start
 _start:
 #if !defined(CONFIG_SERIAL_BOOT)
        nop
        nop
-       move.w #0x2700,%sr              /* Mask off Interrupt */
+       move.w  #0x2700,%sr             /* Mask off Interrupt */
 
        /* Set vector base register at the beginning of the Flash */
        move.l  #CONFIG_SYS_FLASH_BASE, %d0
@@ -638,11 +623,11 @@ _start:
        movec   %d0, %RAMBAR1
 
        /* initialize general use internal ram */
-       move.l #0, %d0
-       move.l #(ICACHE_STATUS), %a1    /* icache */
-       move.l #(DCACHE_STATUS), %a2    /* dcache */
-       move.l %d0, (%a1)
-       move.l %d0, (%a2)
+       move.l  #0, %d0
+       move.l  #(ICACHE_STATUS), %a1   /* icache */
+       move.l  #(DCACHE_STATUS), %a2   /* dcache */
+       move.l  %d0, (%a1)
+       move.l  %d0, (%a2)
 
        /* invalidate and disable cache */
        move.l  #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0
@@ -658,10 +643,10 @@ _start:
 #endif
 
        /* put relocation table address to a5 */
-       move.l #__got_start, %a5
+       move.l  #__got_start, %a5
 
        /* setup stack initially on top of internal static ram  */
-       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
 
        /*
         * if configured, malloc_f arena will be reserved first,
@@ -672,25 +657,26 @@ _start:
        jsr     (%a1)
 
        /* update stack and frame-pointers */
-       move.l  %d0, %sp
-       move.l  %sp, %fp
+       move.l  %d0, %sp
+       move.l  %sp, %fp
 
        /* initialize reserved area */
-       move.l  %d0, -(%sp)
+       move.l  %d0, -(%sp)
        move.l  #board_init_f_init_reserve, %a1
        jsr     (%a1)
 
        /* run low-level CPU init code (from flash) */
-       move.l #cpu_init_f, %a1
-       jsr (%a1)
+       move.l  #cpu_init_f, %a1
+       jsr     (%a1)
+
        /* run low-level board init code (from flash) */
        clr.l   %sp@-
-       move.l #board_init_f, %a1
-       jsr (%a1)
+       move.l  #board_init_f, %a1
+       jsr     (%a1)
 
        /* board_init_f() does not return */
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
@@ -703,23 +689,23 @@ _start:
  * r5 = length in bytes
  * r6 = cachelinesize
  */
-       .globl  relocate_code
+.globl relocate_code
 relocate_code:
-       link.w %a6,#0
-       move.l 8(%a6), %sp              /* set new stack pointer */
+       link.w  %a6,#0
+       move.l  8(%a6), %sp             /* set new stack pointer */
 
-       move.l 12(%a6), %d0             /* Save copy of Global Data pointer */
-       move.l 16(%a6), %a0             /* Save copy of Destination Address */
+       move.l  12(%a6), %d0            /* Save copy of Global Data pointer */
+       move.l  16(%a6), %a0            /* Save copy of Destination Address */
 
-       move.l #CONFIG_SYS_MONITOR_BASE, %a1
-       move.l #__init_end, %a2
-       move.l %a0, %a3
+       move.l  #CONFIG_SYS_MONITOR_BASE, %a1
+       move.l  #__init_end, %a2
+       move.l  %a0, %a3
 
        /* copy the code to RAM */
 1:
-       move.l (%a1)+, (%a3)+
-       cmp.l  %a1,%a2
-       bgt.s    1b
+       move.l  (%a1)+, (%a3)+
+       cmp.l   %a1,%a2
+       bgt.s   1b
 
 /*
  * We are done. Do not return, instead branch to second part of board
@@ -749,7 +735,7 @@ clear_bss:
         */
        move.l  %a0, %a1
        add.l   #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
-       move.l  %a1,%a5                 /* * fix got pointer register a5 */
+       move.l  %a1,%a5                 /* fix got pointer register a5 */
 
        move.l  %a0, %a2
        add.l   #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
@@ -763,39 +749,40 @@ clear_bss:
        bne     7b
 
        /* calculate relative jump to board_init_r in ram */
-       move.l %a0, %a1
-       add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
+       move.l  %a0, %a1
+       add.l   #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
        /* set parameters for board_init_r */
-       move.l %a0,-(%sp)               /* dest_addr */
-       move.l %d0,-(%sp)               /* gd */
+       move.l  %a0,-(%sp)              /* dest_addr */
+       move.l  %d0,-(%sp)              /* gd */
        jsr     (%a1)
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
+
 /* exception code */
-       .globl _fault
+.globl _fault
 _fault:
-       bra _fault
-       .globl  _exc_handler
+       bra     _fault
 
+.globl _exc_handler
 _exc_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr exc_handler
+       bsr     exc_handler
        addql   #4,%sp
        RESTORE_ALL
 
-       .globl  _int_handler
+.globl _int_handler
 _int_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr int_handler
+       bsr     int_handler
        addql   #4,%sp
        RESTORE_ALL
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
-       .globl  version_string
+.globl version_string
 version_string:
-       .ascii U_BOOT_VERSION_STRING, "\0"
-       .align 4
+.ascii U_BOOT_VERSION_STRING, "\0"
+.align 4

diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S
index 9a87a0d..fecf253 100644 (file)
--- a/arch/m68k/cpu/mcf547x_8x/start.S
+++ b/arch/m68k/cpu/mcf547x_8x/start.S
@@ -28,41 +28,25 @@
        rte;
 
 .text
+
 /*
- *     Vector table. This is used for initial platform startup.
- *     These vectors are to catch any un-intended traps.
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
  */
 _vectors:
+INITSP:        .long   0x00000000              /* Initial SP   */
+INITPC:        .long   _START                  /* Initial PC   */
 
-INITSP:                .long   0x00000000      /* Initial SP   */
-INITPC:                .long   _START  /* Initial PC           */
-vector02:      .long   _FAULT  /* Access Error         */
-vector03:      .long   _FAULT  /* Address Error        */
-vector04:      .long   _FAULT  /* Illegal Instruction  */
-vector05:      .long   _FAULT  /* Reserved             */
-vector06:      .long   _FAULT  /* Reserved             */
-vector07:      .long   _FAULT  /* Reserved             */
-vector08:      .long   _FAULT  /* Privilege Violation  */
-vector09:      .long   _FAULT  /* Trace                */
-vector0A:      .long   _FAULT  /* Unimplemented A-Line */
-vector0B:      .long   _FAULT  /* Unimplemented F-Line */
-vector0C:      .long   _FAULT  /* Debug Interrupt      */
-vector0D:      .long   _FAULT  /* Reserved             */
-vector0E:      .long   _FAULT  /* Format Error         */
-vector0F:      .long   _FAULT  /* Unitialized Int.     */
+vector02_0F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 /* Reserved */
 vector10_17:
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
-vector18:      .long   _FAULT  /* Spurious Interrupt   */
-vector19:      .long   _FAULT  /* Autovector Level 1   */
-vector1A:      .long   _FAULT  /* Autovector Level 2   */
-vector1B:      .long   _FAULT  /* Autovector Level 3   */
-vector1C:      .long   _FAULT  /* Autovector Level 4   */
-vector1D:      .long   _FAULT  /* Autovector Level 5   */
-vector1E:      .long   _FAULT  /* Autovector Level 6   */
-vector1F:      .long   _FAULT  /* Autovector Level 7   */
+vector18_1F:
+.long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
 /* TRAP #0 - #15 */
 vector20_2F:
@@ -104,13 +88,13 @@ vector192_255:
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long  _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 
-       .text
+.text
 
-       .globl  _start
+.globl _start
 _start:
        nop
        nop
-       move.w #0x2700,%sr              /* Mask off Interrupt */
+       move.w  #0x2700,%sr             /* Mask off Interrupt */
 
        /* Set vector base register at the beginning of the Flash */
        move.l  #CONFIG_SYS_FLASH_BASE, %d0
@@ -122,7 +106,7 @@ _start:
        move.l  #(CONFIG_SYS_INIT_RAM1_ADDR + CONFIG_SYS_INIT_RAM1_CTRL), %d0
        movec   %d0, %RAMBAR1
 
-       move.l  #CONFIG_SYS_MBAR, %d0           /* set MBAR address */
+       move.l  #CONFIG_SYS_MBAR, %d0   /* set MBAR address */
        move.c  %d0, %MBAR
 
        /* invalidate and disable cache */
@@ -135,17 +119,17 @@ _start:
        movec   %d0, %ACR3
 
        /* initialize general use internal ram */
-       move.l #0, %d0
-       move.l #(ICACHE_STATUS), %a1    /* icache */
-       move.l #(DCACHE_STATUS), %a2    /* icache */
-       move.l %d0, (%a1)
-       move.l %d0, (%a2)
+       move.l  #0, %d0
+       move.l  #(ICACHE_STATUS), %a1   /* icache */
+       move.l  #(DCACHE_STATUS), %a2   /* icache */
+       move.l  %d0, (%a1)
+       move.l  %d0, (%a2)
 
        /* put relocation table address to a5 */
-       move.l #__got_start, %a5
+       move.l  #__got_start, %a5
 
        /* setup stack initially on top of internal static ram  */
-       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+       move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
 
        /*
         * if configured, malloc_f arena will be reserved first,
@@ -159,16 +143,19 @@ _start:
        move.l  %sp, %fp
 
        /* initialize reserved area */
-       move.l  %d0, -(%sp)
-       bsr     board_init_f_init_reserve
+       move.l  %d0, -(%sp)
+       bsr     board_init_f_init_reserve
+
+       /* run low-level CPU init code (from flash) */
+       jbsr    cpu_init_f
 
-       jbsr cpu_init_f                 /* run low-level CPU init code (from flash) */
-       clr.l   %sp@-
-       jbsr board_init_f               /* run low-level board init code (from flash) */
+       /* run low-level board init code (from flash) */
+       clr.l   %sp@-
+       jbsr    board_init_f
 
        /* board_init_f() does not return */
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
@@ -181,23 +168,23 @@ _start:
  * r5 = length in bytes
  * r6 = cachelinesize
  */
-       .globl  relocate_code
+.globl relocate_code
 relocate_code:
-       link.w %a6,#0
-       move.l 8(%a6), %sp              /* set new stack pointer */
+       link.w  %a6,#0
+       move.l  8(%a6), %sp             /* set new stack pointer */
 
-       move.l 12(%a6), %d0             /* Save copy of Global Data pointer */
-       move.l 16(%a6), %a0             /* Save copy of Destination Address */
+       move.l  12(%a6), %d0            /* Save copy of Global Data pointer */
+       move.l  16(%a6), %a0            /* Save copy of Destination Address */
 
-       move.l #CONFIG_SYS_MONITOR_BASE, %a1
-       move.l #__init_end, %a2
-       move.l %a0, %a3
+       move.l  #CONFIG_SYS_MONITOR_BASE, %a1
+       move.l  #__init_end, %a2
+       move.l  %a0, %a3
 
        /* copy the code to RAM */
 1:
-       move.l (%a1)+, (%a3)+
-       cmp.l  %a1,%a2
-       bgt.s    1b
+       move.l  (%a1)+, (%a3)+
+       cmp.l   %a1,%a2
+       bgt.s   1b
 
 /*
  * We are done. Do not return, instead branch to second part of board
@@ -227,7 +214,7 @@ clear_bss:
         */
        move.l  %a0, %a1
        add.l   #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
-       move.l  %a1,%a5         /* * fix got pointer register a5 */
+       move.l  %a1,%a5                 /* fix got pointer register a5 */
 
        move.l  %a0, %a2
        add.l   #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
@@ -241,39 +228,40 @@ clear_bss:
        bne     7b
 
        /* calculate relative jump to board_init_r in ram */
-       move.l %a0, %a1
-       add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
+       move.l  %a0, %a1
+       add.l   #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
        /* set parameters for board_init_r */
-       move.l %a0,-(%sp)               /* dest_addr */
-       move.l %d0,-(%sp)               /* gd */
+       move.l  %a0,-(%sp)              /* dest_addr */
+       move.l  %d0,-(%sp)              /* gd */
        jsr     (%a1)
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
+
 /* exception code */
-       .globl _fault
+.globl _fault
 _fault:
-       bra _fault
-       .globl  _exc_handler
+       bra     _fault
 
+.globl _exc_handler
 _exc_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr exc_handler
+       bsr     exc_handler
        addql   #4,%sp
        RESTORE_ALL
 
-       .globl  _int_handler
+.globl _int_handler
 _int_handler:
        SAVE_ALL
        movel   %sp,%sp@-
-       bsr int_handler
+       bsr     int_handler
        addql   #4,%sp
        RESTORE_ALL
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
-       .globl  version_string
+.globl version_string
 version_string:
-       .ascii U_BOOT_VERSION_STRING, "\0"
-       .align 4
+.ascii U_BOOT_VERSION_STRING, "\0"
+.align 4