[POWERPC] Removed hardcoded phandles from dts
authorKumar Gala <galak@kernel.crashing.org>
Tue, 15 May 2007 21:12:27 +0000 (16:12 -0500)
committerPaul Mackerras <paulus@samba.org>
Thu, 17 May 2007 11:10:17 +0000 (21:10 +1000)
Remove explicit phandles and move to using references that autogenerate the
phandles when needed.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/kuroboxHD.dts
arch/powerpc/boot/dts/kuroboxHG.dts
arch/powerpc/boot/dts/lite5200.dts
arch/powerpc/boot/dts/lite5200b.dts
arch/powerpc/boot/dts/mpc7448hpc2.dts

index 157dc98..a983680 100644 (file)
@@ -21,19 +21,16 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
  */
 
 / {
-       linux,phandle = <1000>;
        model = "KuroboxHD";
        compatible = "linkstation";
        #address-cells = <1>;
        #size-cells = <1>;
 
        cpus {
-               linux,phandle = <2000>;
                #address-cells = <1>;
                #size-cells = <0>;
 
                PowerPC,603e { /* Really 8241 */
-                       linux,phandle = <2100>;
                        device_type = "cpu";
                        reg = <0>;
                        clock-frequency = <bebc200>;    /* Fixed by bootwrapper */
@@ -48,13 +45,11 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
        };
 
        memory {
-               linux,phandle = <3000>;
                device_type = "memory";
                reg = <00000000 04000000>;
        };
 
        soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
-               linux,phandle = <4000>;
                #address-cells = <1>;
                #size-cells = <1>;
                #interrupt-cells = <2>;
@@ -69,38 +64,34 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
                          fef00000 fef00000 00100000>;  /* pci iack */
 
                i2c@80003000 {
-                       linux,phandle = <4300>;
                        device_type = "i2c";
                        compatible = "fsl-i2c";
                        reg = <80003000 1000>;
                        interrupts = <5 2>;
-                       interrupt-parent = <4400>;
+                       interrupt-parent = <&mpic>;
                };
 
                serial@80004500 {
-                       linux,phandle = <4511>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <80004500 8>;
                        clock-frequency = <5d08d88>;
                        current-speed = <2580>;
                        interrupts = <9 2>;
-                       interrupt-parent = <4400>;
+                       interrupt-parent = <&mpic>;
                };
 
                serial@80004600 {
-                       linux,phandle = <4512>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <80004600 8>;
                        clock-frequency = <5d08d88>;
                        current-speed = <e100>;
                        interrupts = <a 0>;
-                       interrupt-parent = <4400>;
+                       interrupt-parent = <&mpic>;
                };
 
-               pic@80040000 {
-                       linux,phandle = <4400>;
+               mpic: pic@80040000 {
                        #interrupt-cells = <2>;
                        #address-cells = <0>;
                        device_type = "open-pic";
@@ -111,7 +102,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
                };
 
                pci@fec00000 {
-                       linux,phandle = <4500>;
                        #address-cells = <3>;
                        #size-cells = <2>;
                        #interrupt-cells = <1>;
@@ -122,24 +112,24 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
                                  02000000 0 80000000 80000000 0 70000000>;
                        bus-range = <0 ff>;
                        clock-frequency = <7f28155>;
-                       interrupt-parent = <4400>;
+                       interrupt-parent = <&mpic>;
                        interrupt-map-mask = <f800 0 0 7>;
                        interrupt-map = <
                                /* IDSEL 11 - IRQ0 ETH */
-                               5800 0 0 1 4400 0 1
-                               5800 0 0 2 4400 1 1
-                               5800 0 0 3 4400 2 1
-                               5800 0 0 4 4400 3 1
+                               5800 0 0 1 &mpic 0 1
+                               5800 0 0 2 &mpic 1 1
+                               5800 0 0 3 &mpic 2 1
+                               5800 0 0 4 &mpic 3 1
                                /* IDSEL 12 - IRQ1 IDE0 */
-                               6000 0 0 1 4400 1 1
-                               6000 0 0 2 4400 2 1
-                               6000 0 0 3 4400 3 1
-                               6000 0 0 4 4400 0 1
+                               6000 0 0 1 &mpic 1 1
+                               6000 0 0 2 &mpic 2 1
+                               6000 0 0 3 &mpic 3 1
+                               6000 0 0 4 &mpic 0 1
                                /* IDSEL 14 - IRQ3 USB2.0 */
-                               7000 0 0 1 4400 3 1
-                               7000 0 0 2 4400 3 1
-                               7000 0 0 3 4400 3 1
-                               7000 0 0 4 4400 3 1
+                               7000 0 0 1 &mpic 3 1
+                               7000 0 0 2 &mpic 3 1
+                               7000 0 0 3 &mpic 3 1
+                               7000 0 0 4 &mpic 3 1
                        >;
                };
        };
index 919eb29..5cf42dc 100644 (file)
@@ -21,19 +21,16 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
  */
 
 / {
-       linux,phandle = <1000>;
        model = "KuroboxHG";
        compatible = "linkstation";
        #address-cells = <1>;
        #size-cells = <1>;
 
        cpus {
-               linux,phandle = <2000>;
                #address-cells = <1>;
                #size-cells = <0>;
 
                PowerPC,603e { /* Really 8241 */
-                       linux,phandle = <2100>;
                        device_type = "cpu";
                        reg = <0>;
                        clock-frequency = <fdad680>;    /* Fixed by bootwrapper */
@@ -48,13 +45,11 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
        };
 
        memory {
-               linux,phandle = <3000>;
                device_type = "memory";
                reg = <00000000 08000000>;
        };
 
        soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
-               linux,phandle = <4000>;
                #address-cells = <1>;
                #size-cells = <1>;
                #interrupt-cells = <2>;
@@ -69,38 +64,35 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
                          fef00000 fef00000 00100000>;  /* pci iack */
 
                i2c@80003000 {
-                       linux,phandle = <4300>;
                        device_type = "i2c";
                        compatible = "fsl-i2c";
                        reg = <80003000 1000>;
                        interrupts = <5 2>;
-                       interrupt-parent = <4400>;
+                       interrupt-parent = <&mpic>;
                };
 
                serial@80004500 {
-                       linux,phandle = <4511>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <80004500 8>;
                        clock-frequency = <7c044a8>;
                        current-speed = <2580>;
                        interrupts = <9 2>;
-                       interrupt-parent = <4400>;
+                       interrupt-parent = <&mpic>;
                };
 
                serial@80004600 {
-                       linux,phandle = <4512>;
                        device_type = "serial";
                        compatible = "ns16550";
                        reg = <80004600 8>;
                        clock-frequency = <7c044a8>;
                        current-speed = <e100>;
                        interrupts = <a 0>;
-                       interrupt-parent = <4400>;
+                       interrupt-parent = <&mpic>;
                };
 
-               pic@80040000 {
-                       linux,phandle = <4400>;
+               mpic: pic@80040000 {
+                       interrupt-parent = <&mpic>;
                        #interrupt-cells = <2>;
                        #address-cells = <0>;
                        device_type = "open-pic";
@@ -111,7 +103,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
                };
 
                pci@fec00000 {
-                       linux,phandle = <4500>;
                        #address-cells = <3>;
                        #size-cells = <2>;
                        #interrupt-cells = <1>;
@@ -122,24 +113,24 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
                                  02000000 0 80000000 80000000 0 70000000>;
                        bus-range = <0 ff>;
                        clock-frequency = <7f28155>;
-                       interrupt-parent = <4400>;
+                       interrupt-parent = <&mpic>;
                        interrupt-map-mask = <f800 0 0 7>;
                        interrupt-map = <
                                /* IDSEL 11 - IRQ0 ETH */
-                               5800 0 0 1 4400 0 1
-                               5800 0 0 2 4400 1 1
-                               5800 0 0 3 4400 2 1
-                               5800 0 0 4 4400 3 1
+                               5800 0 0 1 &mpic 0 1
+                               5800 0 0 2 &mpic 1 1
+                               5800 0 0 3 &mpic 2 1
+                               5800 0 0 4 &mpic 3 1
                                /* IDSEL 12 - IRQ1 IDE0 */
-                               6000 0 0 1 4400 1 1
-                               6000 0 0 2 4400 2 1
-                               6000 0 0 3 4400 3 1
-                               6000 0 0 4 4400 0 1
+                               6000 0 0 1 &mpic 1 1
+                               6000 0 0 2 &mpic 2 1
+                               6000 0 0 3 &mpic 3 1
+                               6000 0 0 4 &mpic 0 1
                                /* IDSEL 14 - IRQ3 USB2.0 */
-                               7000 0 0 1 4400 3 1
-                               7000 0 0 2 4400 3 1
-                               7000 0 0 3 4400 3 1
-                               7000 0 0 4 4400 3 1
+                               7000 0 0 1 &mpic 3 1
+                               7000 0 0 2 &mpic 3 1
+                               7000 0 0 3 &mpic 3 1
+                               7000 0 0 4 &mpic 3 1
                        >;
                };
        };
index e13ac6e..eae68ab 100644 (file)
@@ -49,7 +49,7 @@
        soc5200@f0000000 {
                model = "fsl,mpc5200";
                compatible = "mpc5200";
-               revision = ""                   // from bootloader
+               revision = "";                  // from bootloader
                #interrupt-cells = <3>;
                device_type = "soc";
                ranges = <0 f0000000 f0010000>;
                        reg = <200 38>;
                };
 
-               pic@500 {
+               mpc5200_pic: pic@500 {
                        // 5200 interrupts are encoded into two levels;
-                       linux,phandle = <500>;
                        interrupt-controller;
                        #interrupt-cells = <3>;
                        device_type = "interrupt-controller";
-                       compatible = "mpc5200-pic";
+                       compatible = "mpc5200_pic";
                        reg = <500 80>;
                        built-in;
                };
@@ -79,7 +78,7 @@
                        cell-index = <0>;
                        reg = <600 10>;
                        interrupts = <1 9 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        has-wdt;
                };
 
@@ -89,7 +88,7 @@
                        cell-index = <1>;
                        reg = <610 10>;
                        interrupts = <1 a 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@620 {       // General Purpose Timer
@@ -98,7 +97,7 @@
                        cell-index = <2>;
                        reg = <620 10>;
                        interrupts = <1 b 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@630 {       // General Purpose Timer
                        cell-index = <3>;
                        reg = <630 10>;
                        interrupts = <1 c 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@640 {       // General Purpose Timer
                        cell-index = <4>;
                        reg = <640 10>;
                        interrupts = <1 d 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@650 {       // General Purpose Timer
                        cell-index = <5>;
                        reg = <650 10>;
                        interrupts = <1 e 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@660 {       // General Purpose Timer
                        cell-index = <6>;
                        reg = <660 10>;
                        interrupts = <1 f 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@670 {       // General Purpose Timer
                        cell-index = <7>;
                        reg = <670 10>;
                        interrupts = <1 10 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                rtc@800 {       // Real time clock
                        device_type = "rtc";
                        reg = <800 100>;
                        interrupts = <1 5 0 1 6 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                mscan@900 {
                        compatible = "mpc5200-mscan";
                        cell-index = <0>;
                        interrupts = <2 11 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        reg = <900 80>;
                };
 
                        compatible = "mpc5200-mscan";
                        cell-index = <1>;
                        interrupts = <2 12 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        reg = <980 80>;
                };
 
                        compatible = "mpc5200-gpio";
                        reg = <b00 40>;
                        interrupts = <1 7 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpio-wkup@c00 {
                        compatible = "mpc5200-gpio-wkup";
                        reg = <c00 40>;
                        interrupts = <1 8 0 0 3 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                pci@0d00 {
                        compatible = "mpc5200-pci";
                        reg = <d00 100>;
                        interrupt-map-mask = <f800 0 0 7>;
-                       interrupt-map = <c000 0 0 1 500 0 0 3
-                                        c000 0 0 2 500 0 0 3
-                                        c000 0 0 3 500 0 0 3
-                                        c000 0 0 4 500 0 0 3>;
+                       interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
+                                        c000 0 0 2 &mpc5200_pic 0 0 3
+                                        c000 0 0 3 &mpc5200_pic 0 0 3
+                                        c000 0 0 4 &mpc5200_pic 0 0 3>;
                        clock-frequency = <0>; // From boot loader
                        interrupts = <2 8 0 2 9 0 2 a 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        bus-range = <0 0>;
                        ranges = <42000000 0 80000000 80000000 0 20000000
                                  02000000 0 a0000000 a0000000 0 10000000
                        compatible = "mpc5200-spi";
                        reg = <f00 20>;
                        interrupts = <2 d 0 2 e 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                usb@1000 {
                        compatible = "mpc5200-ohci\0ohci-be";
                        reg = <1000 ff>;
                        interrupts = <2 6 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                bestcomm@1200 {
                                      3 4 0  3 5 0  3 6 0  3 7 0
                                      3 8 0  3 9 0  3 a 0  3 b 0
                                      3 c 0  3 d 0  3 e 0  3 f 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                xlb@1f00 {
                        cell-index = <0>;
                        reg = <2000 100>;
                        interrupts = <2 1 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                // PSC2 in ac97 mode example
                //      cell-index = <1>;
                //      reg = <2200 100>;
                //      interrupts = <2 2 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                // PSC3 in CODEC mode example
                //      cell-index = <2>;
                //      reg = <2400 100>;
                //      interrupts = <2 3 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                // PSC4 in uart mode example
                //      cell-index = <3>;
                //      reg = <2600 100>;
                //      interrupts = <2 b 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                // PSC5 in uart mode example
                //      cell-index = <4>;
                //      reg = <2800 100>;
                //      interrupts = <2 c 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                // PSC6 in spi mode example
                //      cell-index = <5>;
                //      reg = <2c00 100>;
                //      interrupts = <2 4 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                ethernet@3000 {
                        reg = <3000 800>;
                        mac-address = [ 02 03 04 05 06 07 ]; // Bad!
                        interrupts = <2 5 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                ata@3a00 {
                        compatible = "mpc5200-ata";
                        reg = <3a00 100>;
                        interrupts = <2 7 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                i2c@3d00 {
                        cell-index = <0>;
                        reg = <3d00 40>;
                        interrupts = <2 f 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        fsl5200-clocking;
                };
 
                        cell-index = <1>;
                        reg = <3d40 40>;
                        interrupts = <2 10 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        fsl5200-clocking;
                };
                sram@8000 {
index 00211b3..5185625 100644 (file)
                        reg = <200 38>;
                };
 
-               pic@500 {
+               mpc5200_pic: pic@500 {
                        // 5200 interrupts are encoded into two levels;
-                       linux,phandle = <500>;
                        interrupt-controller;
                        #interrupt-cells = <3>;
                        device_type = "interrupt-controller";
-                       compatible = "mpc5200b-pic\0mpc5200-pic";
+                       compatible = "mpc5200b-pic\0mpc5200_pic";
                        reg = <500 80>;
                        built-in;
                };
@@ -79,7 +78,7 @@
                        cell-index = <0>;
                        reg = <600 10>;
                        interrupts = <1 9 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        has-wdt;
                };
 
@@ -89,7 +88,7 @@
                        cell-index = <1>;
                        reg = <610 10>;
                        interrupts = <1 a 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@620 {       // General Purpose Timer
@@ -98,7 +97,7 @@
                        cell-index = <2>;
                        reg = <620 10>;
                        interrupts = <1 b 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@630 {       // General Purpose Timer
                        cell-index = <3>;
                        reg = <630 10>;
                        interrupts = <1 c 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@640 {       // General Purpose Timer
                        cell-index = <4>;
                        reg = <640 10>;
                        interrupts = <1 d 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@650 {       // General Purpose Timer
                        cell-index = <5>;
                        reg = <650 10>;
                        interrupts = <1 e 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@660 {       // General Purpose Timer
                        cell-index = <6>;
                        reg = <660 10>;
                        interrupts = <1 f 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpt@670 {       // General Purpose Timer
                        cell-index = <7>;
                        reg = <670 10>;
                        interrupts = <1 10 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                rtc@800 {       // Real time clock
                        device_type = "rtc";
                        reg = <800 100>;
                        interrupts = <1 5 0 1 6 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                mscan@900 {
                        compatible = "mpc5200b-mscan\0mpc5200-mscan";
                        cell-index = <0>;
                        interrupts = <2 11 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        reg = <900 80>;
                };
 
                        compatible = "mpc5200b-mscan\0mpc5200-mscan";
                        cell-index = <1>;
                        interrupts = <2 12 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        reg = <980 80>;
                };
 
                        compatible = "mpc5200b-gpio\0mpc5200-gpio";
                        reg = <b00 40>;
                        interrupts = <1 7 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                gpio-wkup@c00 {
                        compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
                        reg = <c00 40>;
                        interrupts = <1 8 0 0 3 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                pci@0d00 {
                        compatible = "mpc5200b-pci\0mpc5200-pci";
                        reg = <d00 100>;
                        interrupt-map-mask = <f800 0 0 7>;
-                       interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot
-                                        c000 0 0 2 500 1 1 3
-                                        c000 0 0 3 500 1 2 3
-                                        c000 0 0 4 500 1 3 3
-
-                                        c800 0 0 1 500 1 1 3 // 2nd slot
-                                        c800 0 0 2 500 1 2 3
-                                        c800 0 0 3 500 1 3 3
-                                        c800 0 0 4 500 0 0 3>;
+                       interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+                                        c000 0 0 2 &mpc5200_pic 1 1 3
+                                        c000 0 0 3 &mpc5200_pic 1 2 3
+                                        c000 0 0 4 &mpc5200_pic 1 3 3
+
+                                        c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+                                        c800 0 0 2 &mpc5200_pic 1 2 3
+                                        c800 0 0 3 &mpc5200_pic 1 3 3
+                                        c800 0 0 4 &mpc5200_pic 0 0 3>;
                        clock-frequency = <0>; // From boot loader
                        interrupts = <2 8 0 2 9 0 2 a 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        bus-range = <0 0>;
                        ranges = <42000000 0 80000000 80000000 0 20000000
                                  02000000 0 a0000000 a0000000 0 10000000
                        compatible = "mpc5200b-spi\0mpc5200-spi";
                        reg = <f00 20>;
                        interrupts = <2 d 0 2 e 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                usb@1000 {
                        compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
                        reg = <1000 ff>;
                        interrupts = <2 6 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                bestcomm@1200 {
                                      3 4 0  3 5 0  3 6 0  3 7 0
                                      3 8 0  3 9 0  3 a 0  3 b 0
                                      3 c 0  3 d 0  3 e 0  3 f 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                xlb@1f00 {
                        cell-index = <0>;
                        reg = <2000 100>;
                        interrupts = <2 1 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                // PSC2 in ac97 mode example
                //      cell-index = <1>;
                //      reg = <2200 100>;
                //      interrupts = <2 2 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                // PSC3 in CODEC mode example
                //      cell-index = <2>;
                //      reg = <2400 100>;
                //      interrupts = <2 3 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                // PSC4 in uart mode example
                //      cell-index = <3>;
                //      reg = <2600 100>;
                //      interrupts = <2 b 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                // PSC5 in uart mode example
                //      cell-index = <4>;
                //      reg = <2800 100>;
                //      interrupts = <2 c 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                // PSC6 in spi mode example
                //      cell-index = <5>;
                //      reg = <2c00 100>;
                //      interrupts = <2 4 0>;
-               //      interrupt-parent = <500>;
+               //      interrupt-parent = <&mpc5200_pic>;
                //};
 
                ethernet@3000 {
                        reg = <3000 800>;
                        mac-address = [ 02 03 04 05 06 07 ]; // Bad!
                        interrupts = <2 5 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                ata@3a00 {
                        compatible = "mpc5200b-ata\0mpc5200-ata";
                        reg = <3a00 100>;
                        interrupts = <2 7 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                };
 
                i2c@3d00 {
                        cell-index = <0>;
                        reg = <3d00 40>;
                        interrupts = <2 f 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        fsl5200-clocking;
                };
 
                        cell-index = <1>;
                        reg = <3d40 40>;
                        interrupts = <2 10 0>;
-                       interrupt-parent = <500>;
+                       interrupt-parent = <&mpc5200_pic>;
                        fsl5200-clocking;
                };
                sram@8000 {
index 6fa3754..765c306 100644 (file)
        compatible = "mpc74xx";
        #address-cells = <1>;
        #size-cells = <1>;
-       linux,phandle = <100>;
 
        cpus {
                #address-cells = <1>;
                #size-cells =<0>;
-               linux,phandle = <200>;
                                
                PowerPC,7448@0 {
                        device_type = "cpu";
                        clock-frequency = <0>;          // From U-Boot
                        bus-frequency = <0>;            // From U-Boot
                        32-bit;
-                       linux,phandle = <201>;
                };
        };
 
        memory {
                device_type = "memory";
-               linux,phandle = <300>;
                reg = <00000000 20000000        // DDR2   512M at 0
                       >;
        };
@@ -55,7 +51,7 @@
                bus-frequency = <0>;
 
                i2c@7000 {
-                       interrupt-parent = <7400>;
+                       interrupt-parent = <&mpic>;
                        interrupts = <E 0>;
                        reg = <7000 400>;
                        device_type = "i2c";
                        device_type = "mdio";
                        compatible = "tsi-ethernet";
 
-                       ethernet-phy@6000 {
-                               linux,phandle = <6000>;
-                               interrupt-parent = <7400>;
+                       phy8: ethernet-phy@6000 {
+                               interrupt-parent = <&mpic>;
                                interrupts = <2 1>;
                                reg = <6000 50>;
                                phy-id = <8>;
                                device_type = "ethernet-phy";
                        };
 
-                       ethernet-phy@6400 {
-                               linux,phandle = <6400>;
-                               interrupt-parent = <7400>;
+                       phy9: ethernet-phy@6400 {
+                               interrupt-parent = <&mpic>;
                                interrupts = <2 1>;
                                reg = <6000 50>;
                                phy-id = <9>;
@@ -94,8 +88,8 @@
                        reg = <6000 200>;
                        address = [ 00 06 D2 00 00 01 ];
                        interrupts = <10 2>;
-                       interrupt-parent = <7400>;
-                       phy-handle = <6000>;
+                       interrupt-parent = <&mpic>;
+                       phy-handle = <&phy8>;
                };
 
                ethernet@6600 {
                        reg = <6400 200>;
                        address = [ 00 06 D2 00 00 02 ];
                        interrupts = <11 2>;
-                       interrupt-parent = <7400>;
-                       phy-handle = <6400>;
+                       interrupt-parent = <&mpic>;
+                       phy-handle = <&phy9>;
                };
 
                serial@7808 {
                        reg = <7808 200>;
                        clock-frequency = <3f6b5a00>;
                        interrupts = <c 0>;
-                       interrupt-parent = <7400>;
+                       interrupt-parent = <&mpic>;
                };
 
                serial@7c08 {
                        reg = <7c08 200>;
                        clock-frequency = <3f6b5a00>;
                        interrupts = <d 0>;
-                       interrupt-parent = <7400>;
+                       interrupt-parent = <&mpic>;
                };
 
-               pic@7400 {
-                       linux,phandle = <7400>;
+               mpic: pic@7400 {
                        clock-frequency = <0>;
                        interrupt-controller;
                        #address-cells = <0>;
                pci@1000 {
                        compatible = "tsi10x";
                        device_type = "pci";
-                       linux,phandle = <1000>;
                        #interrupt-cells = <1>;
                        #size-cells = <2>;
                        #address-cells = <3>;
                        ranges = <02000000 0 e0000000 e0000000 0 1A000000       
                                  01000000 0 00000000 fa000000 0 00010000>;
                        clock-frequency = <7f28154>;
-                       interrupt-parent = <7400>;
+                       interrupt-parent = <&mpic>;
                        interrupts = <17 2>;
                        interrupt-map-mask = <f800 0 0 7>;
                        interrupt-map = <
 
                                /* IDSEL 0x11 */
-                               0800 0 0 1 1180 24 0
-                               0800 0 0 2 1180 25 0
-                               0800 0 0 3 1180 26 0
-                               0800 0 0 4 1180 27 0
+                               0800 0 0 1 &RT0 24 0
+                               0800 0 0 2 &RT0 25 0
+                               0800 0 0 3 &RT0 26 0
+                               0800 0 0 4 &RT0 27 0
 
                                /* IDSEL 0x12 */
-                               1000 0 0 1 1180 25 0
-                               1000 0 0 2 1180 26 0
-                               1000 0 0 3 1180 27 0
-                               1000 0 0 4 1180 24 0
+                               1000 0 0 1 &RT0 25 0
+                               1000 0 0 2 &RT0 26 0
+                               1000 0 0 3 &RT0 27 0
+                               1000 0 0 4 &RT0 24 0
 
                                /* IDSEL 0x13 */
-                               1800 0 0 1 1180 26 0
-                               1800 0 0 2 1180 27 0
-                               1800 0 0 3 1180 24 0
-                               1800 0 0 4 1180 25 0
+                               1800 0 0 1 &RT0 26 0
+                               1800 0 0 2 &RT0 27 0
+                               1800 0 0 3 &RT0 24 0
+                               1800 0 0 4 &RT0 25 0
 
                                /* IDSEL 0x14 */
-                               2000 0 0 1 1180 27 0
-                               2000 0 0 2 1180 24 0
-                               2000 0 0 3 1180 25 0
-                               2000 0 0 4 1180 26 0
+                               2000 0 0 1 &RT0 27 0
+                               2000 0 0 2 &RT0 24 0
+                               2000 0 0 3 &RT0 25 0
+                               2000 0 0 4 &RT0 26 0
                                >;
-                       router@1180 {
-                               linux,phandle = <1180>;
+
+                       RT0: router@1180 {
                                clock-frequency = <0>;
                                interrupt-controller;
                                device_type = "pic-router";
                                built-in;
                                big-endian;
                                interrupts = <17 2>;
-                               interrupt-parent = <7400>;
+                               interrupt-parent = <&mpic>;
                        };
                };
        };