include/socketcan/can/error.h \
include/socketcan/can/gw.h \
include/socketcan/can.h \
- include/socketcan/can/ioctl.h \
include/socketcan/can/isotp.h \
include/socketcan/can/netlink.h \
include/socketcan/can/raw.h
+++ /dev/null
-
-/*
- * socketcan/can/ioctl.h
- *
- * Definitions for CAN controller setup (work in progress)
- *
- * $Id$
- *
- * Send feedback to <linux-can@vger.kernel.org>
- *
- */
-
-#ifndef CAN_IOCTL_H
-#define CAN_IOCTL_H
-
-#include <linux/sockios.h>
-
-/*
- * CAN bitrate
- */
-#define CAN_BITRATE_UNCONFIGURED ((__u32) 0xFFFFFFFFU)
-#define CAN_BITRATE_UNKNOWN 0
-#define CAN_BITRATE_DEFAULT 500000
-
-/*
- * CAN custom bit time
- */
-enum can_bittimes {
- CAN_BITTIME_STD,
- CAN_BITTIME_BTR
-};
-
-/* TSEG1 of controllers usually is a sum of synch_seg (always 1),
- * prop_seg and phase_seg1, TSEG2 = phase_seg2 */
-
-struct can_bittime_std {
- __u32 brp; /* baud rate prescaler */
- __u8 prop_seg; /* from 1 to 8 */
- __u8 phase_seg1; /* from 1 to 8 */
- __u8 phase_seg2; /* from 1 to 8 */
- __u8 sjw:7; /* from 1 to 4 */
- __u8 sam:1; /* 1 - enable triple sampling */
-};
-
-struct can_bittime_btr {
- __u8 btr0;
- __u8 btr1;
-};
-
-struct can_bittime {
- enum can_bittimes type;
- union {
- struct can_bittime_std std;
- struct can_bittime_btr btr;
- };
-};
-
-/*
- * CAN mode
- */
-enum can_mode {
- CAN_MODE_STOP = 0,
- CAN_MODE_START,
- CAN_MODE_SLEEP
-};
-
-/*
- * CAN controller mode
- */
-#define CAN_CTRLMODE_LOOPBACK 0x1
-#define CAN_CTRLMODE_LISTENONLY 0x2
-
-/*
- * CAN operational and error states
- */
-enum can_state {
- CAN_STATE_ACTIVE = 0,
- CAN_STATE_BUS_WARNING,
- CAN_STATE_BUS_PASSIVE,
- CAN_STATE_BUS_OFF,
- CAN_STATE_STOPPED,
- CAN_STATE_SLEEPING
-};
-
-/*
- * CAN device statistics
- */
-struct can_device_stats {
- int error_warning;
- int data_overrun;
- int wakeup;
- int bus_error;
- int error_passive;
- int arbitration_lost;
- int restarts;
- int bus_error_at_init;
-};
-
-#endif /* CAN_IOCTL_H */