* 1.7.5 release
+
+2013-04-04 Rafael Antognolli
+
+ * 1.7.6 release
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-rm -f libtool config.lt
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
- test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+ fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
+ chmod -R a-w $(distdir); chmod u+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
-Eeze 1.7.5
+Eeze 1.7.7
+
+Changes since Eeze 1.7.6:
+-------------------------
+
+No changes, just updating to keep in sync with last release.
+
+
+Changes since Eeze 1.7.5:
+-------------------------
+
+No changes, just updating to keep in sync with last release.
+
Changes since Eeze 1.7.4:
-------------------------
-# generated automatically by aclocal 1.11.3 -*- Autoconf -*-
+# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
# ----------------------------------
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
-m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
pkg_cv_[]$1="$$1"
elif test -n "$PKG_CONFIG"; then
PKG_CHECK_EXISTS([$3],
- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes ],
+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
[pkg_failed=yes])
else
pkg_failed=untried
AC_MSG_RESULT([no])
_PKG_SHORT_ERRORS_SUPPORTED
if test $_pkg_short_errors_supported = yes; then
- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
else
- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
-_PKG_TEXT])[]dnl
+_PKG_TEXT])
])
elif test $pkg_failed = untried; then
AC_MSG_RESULT([no])
_PKG_TEXT
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])
])
else
$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
[am__api_version='1.11'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11.3], [],
+m4_if([$1], [1.11.6], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.3])dnl
+[AM_AUTOMAKE_VERSION([1.11.6])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2012-01-04.17; # UTC
+scriptversion=2012-03-05.13; # UTC
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
# Software Foundation, Inc.
esac
}
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
;;
esac
;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
-l*)
- lib=${1#-l}
- found=no
- save_IFS=$IFS
- IFS=';'
- for dir in $lib_path $LIB
- do
- IFS=$save_IFS
- if $shared && test -f "$dir/$lib.dll.lib"; then
- found=yes
- set x "$@" "$dir/$lib.dll.lib"
- break
- fi
- if test -f "$dir/$lib.lib"; then
- found=yes
- set x "$@" "$dir/$lib.lib"
- break
- fi
- done
- IFS=$save_IFS
-
- test "$found" != yes && set x "$@" "$lib.lib"
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
shift
;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
-L*)
- func_file_conv "${1#-L}"
- if test -z "$lib_path"; then
- lib_path=$file
- else
- lib_path="$lib_path;$file"
- fi
- linker_opts="$linker_opts -LIBPATH:$file"
+ func_cl_dashL "${1#-L}"
;;
-static)
shared=false
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for eeze 1.7.5.
+# Generated by GNU Autoconf 2.68 for eeze 1.7.7.
#
# Report bugs to <enlightenment-devel@lists.sourceforge.net>.
#
# Identity of this package.
PACKAGE_NAME='eeze'
PACKAGE_TARNAME='eeze'
-PACKAGE_VERSION='1.7.5'
-PACKAGE_STRING='eeze 1.7.5'
+PACKAGE_VERSION='1.7.7'
+PACKAGE_STRING='eeze 1.7.7'
PACKAGE_BUGREPORT='enlightenment-devel@lists.sourceforge.net'
PACKAGE_URL=''
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures eeze 1.7.5 to adapt to many kinds of systems.
+\`configure' configures eeze 1.7.7 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of eeze 1.7.5:";;
+ short | recursive ) echo "Configuration of eeze 1.7.7:";;
esac
cat <<\_ACEOF
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-eeze configure 1.7.5
+eeze configure 1.7.7
generated by GNU Autoconf 2.68
Copyright (C) 2010 Free Software Foundation, Inc.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by eeze $as_me 1.7.5, which was
+It was created by eeze $as_me 1.7.7, which was
generated by GNU Autoconf 2.68. Invocation command line was
$ $0 $@
# Define the identity of the package.
PACKAGE='eeze'
- VERSION='1.7.5'
+ VERSION='1.7.7'
cat >>confdefs.h <<_ACEOF
lt_cv_deplibs_check_method=pass_all
;;
-netbsd* | netbsdelf*-gnu)
+netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
openbsd*)
with_gnu_ld=no
;;
- linux* | k*bsd*-gnu | gnu*)
- link_all_deplibs=no
- ;;
esac
ld_shlibs=yes
fi
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
if test "$aix_use_runtimelinking" = yes; then
shared_flag="$shared_flag "'${wl}-G'
fi
- link_all_deplibs=no
else
# not using gcc
if test "$host_cpu" = ia64; then
link_all_deplibs=yes
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
# before this can be enabled.
hardcode_into_libs=yes
+ # Add ABI-specific directories to the system library path.
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
dynamic_linker='GNU/Linux ld.so'
;;
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
netbsd*)
version_type=sunos
need_lib_prefix=no
cat >>confdefs.h <<_ACEOF
-#define VMIC 5
+#define VMIC 7
_ACEOF
#define VREV 0
_ACEOF
-version_info="8:5:7"
+version_info="8:7:7"
release_info=""
-requirement_eeze="ecore >= 1.7.5 eina >= 1.7.5 libudev"
+requirement_eeze="ecore >= 1.7.7 eina >= 1.7.7 libudev"
### Checks for programs
-
if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_EEZE_CFLAGS=`$PKG_CONFIG --cflags "${requirement_eeze}" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_EEZE_LIBS=`$PKG_CONFIG --libs "${requirement_eeze}" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- EEZE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "${requirement_eeze}" 2>&1`
+ EEZE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "${requirement_eeze}" 2>&1`
else
- EEZE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "${requirement_eeze}" 2>&1`
+ EEZE_PKG_ERRORS=`$PKG_CONFIG --print-errors "${requirement_eeze}" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$EEZE_PKG_ERRORS" >&5
Alternatively, you may set the environment variables EEZE_CFLAGS
and EEZE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
EEZE_CFLAGS=$pkg_cv_EEZE_CFLAGS
EEZE_LIBS=$pkg_cv_EEZE_LIBS
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LIBMOUNT_CFLAGS=`$PKG_CONFIG --cflags "mount >= 2.18.0" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
pkg_cv_LIBMOUNT_LIBS=`$PKG_CONFIG --libs "mount >= 2.18.0" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- LIBMOUNT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "mount >= 2.18.0" 2>&1`
+ LIBMOUNT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "mount >= 2.18.0" 2>&1`
else
- LIBMOUNT_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "mount >= 2.18.0" 2>&1`
+ LIBMOUNT_PKG_ERRORS=`$PKG_CONFIG --print-errors "mount >= 2.18.0" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$LIBMOUNT_PKG_ERRORS" >&5
Alternatively, you may set the environment variables LIBMOUNT_CFLAGS
and LIBMOUNT_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
LIBMOUNT_CFLAGS=$pkg_cv_LIBMOUNT_CFLAGS
LIBMOUNT_LIBS=$pkg_cv_LIBMOUNT_LIBS
pkg_cv_ECORE_FILE_CFLAGS="$ECORE_FILE_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ecore-file >= 1.7.5\""; } >&5
- ($PKG_CONFIG --exists --print-errors "ecore-file >= 1.7.5") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ecore-file >= 1.7.7\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "ecore-file >= 1.7.7") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_ECORE_FILE_CFLAGS=`$PKG_CONFIG --cflags "ecore-file >= 1.7.5" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
+ pkg_cv_ECORE_FILE_CFLAGS=`$PKG_CONFIG --cflags "ecore-file >= 1.7.7" 2>/dev/null`
else
pkg_failed=yes
fi
pkg_cv_ECORE_FILE_LIBS="$ECORE_FILE_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ecore-file >= 1.7.5\""; } >&5
- ($PKG_CONFIG --exists --print-errors "ecore-file >= 1.7.5") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ecore-file >= 1.7.7\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "ecore-file >= 1.7.7") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_ECORE_FILE_LIBS=`$PKG_CONFIG --libs "ecore-file >= 1.7.5" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
+ pkg_cv_ECORE_FILE_LIBS=`$PKG_CONFIG --libs "ecore-file >= 1.7.7" 2>/dev/null`
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- ECORE_FILE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "ecore-file >= 1.7.5" 2>&1`
+ ECORE_FILE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "ecore-file >= 1.7.7" 2>&1`
else
- ECORE_FILE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "ecore-file >= 1.7.5" 2>&1`
+ ECORE_FILE_PKG_ERRORS=`$PKG_CONFIG --print-errors "ecore-file >= 1.7.7" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$ECORE_FILE_PKG_ERRORS" >&5
- as_fn_error $? "Package requirements (ecore-file >= 1.7.5) were not met:
+ as_fn_error $? "Package requirements (ecore-file >= 1.7.7) were not met:
$ECORE_FILE_PKG_ERRORS
Alternatively, you may set the environment variables ECORE_FILE_CFLAGS
and ECORE_FILE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
ECORE_FILE_CFLAGS=$pkg_cv_ECORE_FILE_CFLAGS
ECORE_FILE_LIBS=$pkg_cv_ECORE_FILE_LIBS
pkg_cv_EET_CFLAGS="$EET_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eet >= 1.7.5\""; } >&5
- ($PKG_CONFIG --exists --print-errors "eet >= 1.7.5") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eet >= 1.7.7\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "eet >= 1.7.7") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_EET_CFLAGS=`$PKG_CONFIG --cflags "eet >= 1.7.5" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
+ pkg_cv_EET_CFLAGS=`$PKG_CONFIG --cflags "eet >= 1.7.7" 2>/dev/null`
else
pkg_failed=yes
fi
pkg_cv_EET_LIBS="$EET_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eet >= 1.7.5\""; } >&5
- ($PKG_CONFIG --exists --print-errors "eet >= 1.7.5") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eet >= 1.7.7\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "eet >= 1.7.7") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_EET_LIBS=`$PKG_CONFIG --libs "eet >= 1.7.5" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
+ pkg_cv_EET_LIBS=`$PKG_CONFIG --libs "eet >= 1.7.7" 2>/dev/null`
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- EET_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "eet >= 1.7.5" 2>&1`
+ EET_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "eet >= 1.7.7" 2>&1`
else
- EET_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "eet >= 1.7.5" 2>&1`
+ EET_PKG_ERRORS=`$PKG_CONFIG --print-errors "eet >= 1.7.7" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$EET_PKG_ERRORS" >&5
- as_fn_error $? "Package requirements (eet >= 1.7.5) were not met:
+ as_fn_error $? "Package requirements (eet >= 1.7.7) were not met:
$EET_PKG_ERRORS
Alternatively, you may set the environment variables EET_CFLAGS
and EET_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
EET_CFLAGS=$pkg_cv_EET_CFLAGS
EET_LIBS=$pkg_cv_EET_LIBS
pkg_cv_ECORE_CON_CFLAGS="$ECORE_CON_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ecore-con >= 1.7.5\""; } >&5
- ($PKG_CONFIG --exists --print-errors "ecore-con >= 1.7.5") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ecore-con >= 1.7.7\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "ecore-con >= 1.7.7") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_ECORE_CON_CFLAGS=`$PKG_CONFIG --cflags "ecore-con >= 1.7.5" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
+ pkg_cv_ECORE_CON_CFLAGS=`$PKG_CONFIG --cflags "ecore-con >= 1.7.7" 2>/dev/null`
else
pkg_failed=yes
fi
pkg_cv_ECORE_CON_LIBS="$ECORE_CON_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ecore-con >= 1.7.5\""; } >&5
- ($PKG_CONFIG --exists --print-errors "ecore-con >= 1.7.5") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ecore-con >= 1.7.7\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "ecore-con >= 1.7.7") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_ECORE_CON_LIBS=`$PKG_CONFIG --libs "ecore-con >= 1.7.5" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
+ pkg_cv_ECORE_CON_LIBS=`$PKG_CONFIG --libs "ecore-con >= 1.7.7" 2>/dev/null`
else
pkg_failed=yes
fi
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- ECORE_CON_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "ecore-con >= 1.7.5" 2>&1`
+ ECORE_CON_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "ecore-con >= 1.7.7" 2>&1`
else
- ECORE_CON_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "ecore-con >= 1.7.5" 2>&1`
+ ECORE_CON_PKG_ERRORS=`$PKG_CONFIG --print-errors "ecore-con >= 1.7.7" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$ECORE_CON_PKG_ERRORS" >&5
- as_fn_error $? "Package requirements (ecore-con >= 1.7.5) were not met:
+ as_fn_error $? "Package requirements (ecore-con >= 1.7.7) were not met:
$ECORE_CON_PKG_ERRORS
Alternatively, you may set the environment variables ECORE_CON_CFLAGS
and ECORE_CON_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details." "$LINENO" 5
+
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See \`config.log' for more details" "$LINENO" 5; }
+
else
ECORE_CON_CFLAGS=$pkg_cv_ECORE_CON_CFLAGS
ECORE_CON_LIBS=$pkg_cv_ECORE_CON_LIBS
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by eeze $as_me 1.7.5, which was
+This file was extended by eeze $as_me 1.7.7, which was
generated by GNU Autoconf 2.68. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-eeze config.status 1.7.5
+eeze config.status 1.7.7
configured by $0, generated by GNU Autoconf 2.68,
with options \\"\$ac_cs_config\\"
##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
m4_define([v_maj], [1])
m4_define([v_min], [7])
-m4_define([v_mic], [5])
-m4_define([v_rev], m4_esyscmd([(svnversion "${SVN_REPO_PATH:-.}" | grep -v '\(export\|Unversioned directory\)' || echo 0) | awk -F : '{printf("%s\n", $1);}' | tr -d ' :MSP\n']))
-m4_if(v_rev, [0], [m4_define([v_rev], m4_esyscmd([git log 2> /dev/null | (grep -m1 git-svn-id || echo 0) | sed -e 's/.*@\([0-9]*\).*/\1/' | tr -d '\n']))])
+m4_define([v_mic], [7])
+m4_define([v_rev], m4_esyscmd([(git rev-list --count HEAD 2>/dev/null || echo 0) | tr -d '\n']))dnl
##-- When released, remove the dnl on the below line
m4_undefine([v_rev])
##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
AC_CANONICAL_BUILD
AC_CANONICAL_HOST
-requirement_eeze="ecore >= 1.7.5 eina >= 1.7.5 libudev"
+requirement_eeze="ecore >= 1.7.7 eina >= 1.7.7 libudev"
### Checks for programs
AC_ARG_WITH([eject], [AS_HELP_STRING([--with-eject], [specify eject bin @<:@default=detect@:>@])], [with_eject=$withval], [with_eject="detect"])
PKG_CHECK_MODULES([LIBMOUNT], [mount >= 2.18.0])
mount_v=$(pkg-config --modversion mount)
- PKG_CHECK_MODULES([ECORE_FILE], [ecore-file >= 1.7.5])
- PKG_CHECK_MODULES([EET], [eet >= 1.7.5])
- PKG_CHECK_MODULES([ECORE_CON], [ecore-con >= 1.7.5])
+ PKG_CHECK_MODULES([ECORE_FILE], [ecore-file >= 1.7.7])
+ PKG_CHECK_MODULES([EET], [eet >= 1.7.7])
+ PKG_CHECK_MODULES([ECORE_CON], [ecore-con >= 1.7.7])
if test "x$with_mount" = "xdetect";then
AC_PATH_PROG([with_mount], [mount], [])
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2011-12-04.11; # UTC
+scriptversion=2012-03-27.16; # UTC
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011 Free Software Foundation, Inc.
+# 2011, 2012 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
case $1 in
'')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
Environment variables:
depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputting dependencies.
;;
esac
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
depmode=msvc7
fi
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
+## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
+ tr ' ' "$nl" < "$tmpdepfile" |
+## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
+ # the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
+ tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> "$depfile"
+ tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
+ tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
rm -f "$tmpdepfile"
;;
+xlc)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
+ # current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- # Each line is of the form `foo.o: dependent.h'.
+ # Each line is of the form 'foo.o: dependent.h'.
# Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
;;
icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
+ # However on
+ # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
# ICC 7.0 will fill foo.d with something like
# foo.o: sub/foo.c
# foo.o: sub/foo.h
- # which is wrong. We want:
+ # which is wrong. We want
# sub/foo.o: sub/foo.c
# sub/foo.o: sub/foo.h
# sub/foo.c:
# sub/foo.h:
# ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
+ # and will wrap long lines using '\':
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
-
+ # tcc 0.9.26 (FIXME still under development at the moment of writing)
+ # will emit a similar output, but also prepend the continuation lines
+ # with horizontal tabulation characters.
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Each line is of the form 'foo.o: dependent.h',
+ # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
# Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
+ < "$tmpdepfile" > "$depfile"
+ sed '
+ s/[ '"$tab"'][ '"$tab"']*/ /g
+ s/^ *//
+ s/ *\\*$//
+ s/^[^:]*: *//
+ /^$/d
+ /:$/d
+ s/$/ :/
+ ' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add `dependent.h:' lines.
+ # Add 'dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
+ # dependencies in 'foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
-s/\(.*\)/ \1 \\/p
+s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
- s/.*/ /
+ s/.*/'"$tab"'/
G
p
}' >> "$depfile"
shift
fi
- # Remove `-o $object'.
+ # Remove '-o $object'.
IFS=" "
for arg
do
done
test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
+ # Require at least two characters before searching for ':'
# in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
+ tr ' ' "$nl" < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
+ sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
shift
fi
- # Remove `-o $object'.
+ # Remove '-o $object'.
IFS=" "
for arg
do
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+ echo "$tab" >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
PACKAGE_TARNAME=eeze
-prefix=/home/lfelipe/e-release/release/local
+prefix=/home/antognolli/efl/1.7/git-release/local
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=${prefix}/include
Name: eeze
Description: device convenience library for efl
-Requires.private: ecore >= 1.7.5 eina >= 1.7.5 libudev
-Version: 1.7.5
+Requires.private: ecore >= 1.7.7 eina >= 1.7.7 libudev
+Version: 1.7.7
Libs: -L${libdir} -leeze
Cflags: -I${includedir}/eeze-1
Summary: Device Convenience Library
Name: eeze
-Version: 1.7.5
+Version: 1.7.7
Release: %{_rel}
License: BSD
Group: System Environment/Libraries
# compiler: $LTCC
# compiler flags: $LTCFLAGS
# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1ubuntu1
+# $progname: (GNU libtool) 2.4.2
# automake: $automake_version
# autoconf: $autoconf_version
#
PROGRAM=libtool
PACKAGE=libtool
-VERSION="2.4.2 Debian-2.4.2-1ubuntu1"
+VERSION=2.4.2
TIMESTAMP=""
package_revision=1.3337
case $pass in
dlopen) libs="$dlfiles" ;;
dlpreopen) libs="$dlprefiles" ;;
- link)
- libs="$deplibs %DEPLIBS%"
- test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
- ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
if test "$linkmode,$pass" = "lib,dlpreopen"; then
# It is a libtool convenience library, so add in its objects.
func_append convenience " $ladir/$objdir/$old_library"
func_append old_convenience " $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
- func_append tmp_libs " $deplib"
- done
elif test "$linkmode" != prog && test "$linkmode" != lib; then
func_fatal_error "\`$lib' is not a convenience library"
fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
continue
fi # $pass = conv
revision="$number_minor"
lt_irix_increment=no
;;
- *)
- func_fatal_configuration "$modename: unknown library version type \`$version_type'"
- ;;
esac
;;
no)
# before this can be enabled.
hardcode_into_libs=yes
+ # Add ABI-specific directories to the system library path.
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
dynamic_linker='GNU/Linux ld.so'
;;
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
netbsd*)
version_type=sunos
need_lib_prefix=no
lt_cv_deplibs_check_method=pass_all
;;
-netbsd* | netbsdelf*-gnu)
+netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
;;
esac
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
;;
*qnx* | *nto*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
;;
esac
;;
- linux* | k*bsd*-gnu | gnu*)
- _LT_TAGVAR(link_all_deplibs, $1)=no
- ;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
openbsd*)
with_gnu_ld=no
;;
- linux* | k*bsd*-gnu | gnu*)
- _LT_TAGVAR(link_all_deplibs, $1)=no
- ;;
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
fi
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
if test "$aix_use_runtimelinking" = yes; then
shared_flag="$shared_flag "'${wl}-G'
fi
- _LT_TAGVAR(link_all_deplibs, $1)=no
else
# not using gcc
if test "$host_cpu" = ia64; then
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
$(am__eeze_mount_SOURCES_DIST) \
$(am__eeze_scanner_SOURCES_DIST) $(eeze_udev_test_SOURCES) \
$(am__eeze_umount_SOURCES_DIST)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
am__includes_HEADERS_DIST = eeze_scanner.h
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(am__aclocal_m4_deps):
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p || test -f $$p1; \
rm -f $$list
install-utilPROGRAMS: $(util_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(utildir)" || $(MKDIR_P) "$(DESTDIR)$(utildir)"
@list='$(util_PROGRAMS)'; test -n "$(utildir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(utildir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(utildir)" || exit 1; \
+ fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p || test -f $$p1; \
-rm -rf .libs _libs
install-includesHEADERS: $(includes_HEADERS)
@$(NORMAL_INSTALL)
- test -z "$(includesdir)" || $(MKDIR_P) "$(DESTDIR)$(includesdir)"
@list='$(includes_HEADERS)'; test -n "$(includesdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(includesdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(includesdir)" || exit 1; \
+ fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(libeeze_la_SOURCES)
DIST_SOURCES = $(am__libeeze_la_SOURCES_DIST)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
am__includes_HEADERS_DIST = Eeze.h Eeze_Net.h Eeze_Disk.h
HEADERS = $(includes_HEADERS)
ETAGS = etags
$(am__aclocal_m4_deps):
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
- test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
+ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
}
-rm -rf .libs _libs
install-includesHEADERS: $(includes_HEADERS)
@$(NORMAL_INSTALL)
- test -z "$(includesdir)" || $(MKDIR_P) "$(DESTDIR)$(includesdir)"
@list='$(includes_HEADERS)'; test -n "$(includesdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(includesdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(includesdir)" || exit 1; \
+ fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
projects / platform / upstream / eeze.git / commitdiff