- compatible
- mboxes
+additionalProperties: false
+
examples:
- |
firmware {
- compatible
- reg
+additionalProperties: false
+
examples:
- |
pericfg@10003000 {
required:
- compatible
+additionalProperties: false
+
...
contains:
const: apb_pclk
additionalItems: true
+
+additionalProperties: true
+
...
- clocks
- '#clock-cells'
+additionalProperties: false
+
dependencies:
"nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
"nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
- compatible
- reg
+additionalProperties: false
+
examples:
- |
cdmm@1bde8000 {
"ranges" property should provide a "reasonable" default that is known to
work. The software should initialize the bus controller according to it.
+patternProperties:
+ "^.*@[1-5],[1-9a-f][0-9a-f]+$":
+ description: Devices attached to chip selects
+ type: object
+
required:
- compatible
- reg
- "#size-cells"
- ranges
+additionalProperties: false
+
examples:
- |
// In this example,
- compatible
- clocks
+additionalProperties: false
+
examples:
- |
vco1: clock {
'#clock-cells':
const: 1
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [ xin, clkin ]
+ clocks:
+ minItems: 1
+ maxItems: 2
+
patternProperties:
"^OUT[1-4]$":
type: object
maxItems: 1
else:
# Devices without builtin crystal
- properties:
- clock-names:
- minItems: 1
- maxItems: 2
- items:
- enum: [ xin, clkin ]
- clocks:
- minItems: 1
- maxItems: 2
required:
- clock-names
- clocks
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clk/versaclock.h>
- interrupts
- '#clock-cells'
+additionalProperties: false
+
examples:
# Clock Control Module node:
- |
- interrupts
- '#clock-cells'
+additionalProperties: false
+
examples:
# Clock Control Module node:
- |
- clocks
- clock-names
+additionalProperties: false
+
examples:
# Clock Control Module node:
- |
- clocks
- clock-names
+additionalProperties: false
+
examples:
# Clock Control Module node:
- |
- clocks
- clock-names
+additionalProperties: false
+
examples:
# Clock Control Module node:
- |
- reg
- '#clock-cells'
+additionalProperties: false
+
examples:
- |
cgu: clock-controller@e0200000 {
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
The 'reg' property for the clock node is also required if there is a sub
range of registers for the clocks.
+additionalProperties: false
+
examples:
- |
ap_clk: clock-controller@21500000 {
- "#clock-cells"
- reg
+additionalProperties: false
+
examples:
- |
ehrpwm_tbclk: syscon@4140 {
compatible:
const: ite,it6505
+ reg:
+ maxItems: 1
+
ovdd-supply:
maxItems: 1
description: I/O voltage
- reset-gpios
- extcon
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- compatible
- ports
+additionalProperties: false
+
+
examples:
- |
lvds-encoder {
- iommus
- operating-points-v2
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
- interrupts
- interrupt-names
+additionalProperties: false
+
examples:
- |
dmc0: dmc@200000 {
- compatible
- reg
+additionalProperties: false
+
examples:
- |
fsi2spi@1c00 {
- gpio-ranges
- socionext,interrupt-ranges
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- interrupts
- pulses-per-revolution
+additionalProperties: false
+
examples:
- |
fpga_axi: fpga-axi {
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
mount-matrix:
description: an optional 3x3 mounting rotation matrix.
+ spi-max-frequency: true
+
required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
# include <dt-bindings/interrupt-controller/irq.h>
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
description:
End of conversion interrupt.
+ io-channel-ranges: true
+
required:
- compatible
- reg
enum: [ 1, 2, 4, 8, 16 ]
default: 1
+additionalProperties: false
+
examples:
- |
spmi_bus {
description: Optional external reference. If not supplied, assume
REFSEL input tied low to enable the internal reference.
+ spi-max-frequency: true
+
required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
spi {
- compatible
- ctrl-gpios
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
vddio-supply:
description: Regulator that provides power to the bus
+ spi-max-frequency: true
+ spi-cpha: true
+ spi-cpol: true
+
required:
- compatible
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- sharp,proximity-far-hysteresis
- sharp,proximity-close-hysteresis
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
- "#interrupt-cells"
- interrupt-controller
+additionalProperties: false
+
examples:
- |
intc: interrupt-controller@10001000 {
- loongson,msi-base-vec
- loongson,msi-num-vecs
+additionalProperties: true #fixme
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- interrupt-controller
- '#interrupt-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- compatible
- reg
+additionalProperties: false
+
examples:
- |
smic@fff3a000 {
- 2 # D1~6 with VOUT, D7~9 with VDD
- 3 # D1~9 are connected to VOUT
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
patternProperties:
"(^led@[0-9a-f]$|led)":
type: object
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/leds/common.h>
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- reg
- port
+additionalProperties: false
+
examples:
- |
i2c@e66d8000 {
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/imx8mq-clock.h>
- video-decoder
- video-encoder
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- video-decoder
- video-encoder
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- video-decoder
- video-encoder
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- video-core0
- video-core1
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- video-core0
- video-core1
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/imx6qdl-clock.h>
- clocks
- ranges
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
reg:
maxItems: 1
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
select:
properties:
compatible:
required:
- compatible
+patternProperties:
+ "^gpio@[0-9a-f]+$":
+ $ref: /schemas/gpio/xylon,logicvc-gpio.yaml#
+
required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
logicvc: logicvc@43c00000 {
compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
reg = <0x43c00000 0x6000>;
- #address-cells = <1>;
- #size-cells = <1>;
};
clocks:
maxItems: 1
+ device_type: true
+
required:
- device_type
- compatible
- reg
- clocks
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/jz4780-cgu.h>
reg = <0>;
clocks = <&cgu JZ4780_CLK_CPU>;
- clock-names = "cpu";
};
cpu1: cpu@1 {
reg = <1>;
clocks = <&cgu JZ4780_CLK_CORE1>;
- clock-names = "cpu";
};
};
...
- compatible
- reg
+additionalProperties: false
+
examples:
- |
isa@0 {
- compatible
- reset-gpios
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- powerdown-gpios
- reset-gpios
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
required:
- compatible
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- required:
- memory-region
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
required:
- compatible
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
bluetooth {
compatible = "realtek,rtl8723bs-bt";
device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
- host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
};
};
compatible:
const: microchip,wilc1000
+ reg: true
+
spi-max-frequency: true
interrupts:
- compatible
- interrupts
+additionalProperties: false
+
examples:
- |
spi {
- clock-names
- max-functions
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
required:
- power-domains
+additionalProperties: false
+
examples:
- |
phy@36000 {
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
- vdda-phy-dpdm-supply
- resets
+additionalProperties: false
examples:
- |
- reset-names
- "#phy-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
- gpio-ranges
- pinctrl-0
- pinctrl-names
+
+additionalProperties: false
required:
- compatible
+additionalProperties: false
+
examples:
- |
// The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
- compatible
- "#power-domain-cells"
+additionalProperties: false
+
examples:
- |
secure-monitor {
- exit-latency-us
- min-residency-us
+additionalProperties: false
+
examples:
- |
- compatible
- reg
+additionalProperties: false
+
examples:
- |
cpc@1bde0000 {
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
# threshold, and the current is below this setting (7 in above chart)
# See also Documentation/devicetree/bindings/power/supply/battery.txt
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
monitored-battery:
description:
phandle of battery characteristics devicetree node
required:
- compatible
+additionalProperties: false
+
examples:
- |
i2c {
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
- compatible
- reg
+additionalProperties: false
+
examples:
- |
imem@146bf000 {
- interrupts
- reg
+additionalProperties: false
+
allOf:
- if:
properties:
- interrupts
- clocks
+additionalProperties: false
+
examples:
- |
aliases {
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- compatible
- interrupts
+additionalProperties: false
examples:
- |
- reg
- resets
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
- model
- dai-link-0
+additionalProperties: false
+
examples:
- |
sound {
- clock-names
- resets
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/g12a-clkc.h>
- reg
- "#sound-dai-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- fsl,asrc-rate
- fsl,asrc-format
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/imx8mn-clock.h>
- clock-names
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- assigned-clock-parents
- sound-name-prefix
+additionalProperties: false
+
examples:
- |
#include<dt-bindings/clock/tegra186-clock.h>
- dmas
- dma-names
+additionalProperties: false
+
examples:
- |
admaif@702d0000 {
- assigned-clocks
- assigned-clock-parents
+additionalProperties: false
+
examples:
- |
#include<dt-bindings/clock/tegra210-car.h>
- assigned-clocks
- assigned-clock-parents
+additionalProperties: false
+
examples:
- |
#include<dt-bindings/clock/tegra210-car.h>
- rockchip,grf
- "#sound-dai-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
resets:
maxItems: 1
+ "#thermal-sensor-cells":
+ const: 0
+
if:
properties:
compatible:
- power-domains
- resets
+additionalProperties: false
+
examples:
# Example (non interrupt support)
- |
- nvmem-cells
- nvmem-cell-names
+ additionalProperties: false
+
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
examples:
- |
ap_thm0: thermal@32200000 {
required:
- '#cooling-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/thermal/thermal.h>
- trips
additionalProperties: false
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- interrupts
- clocks
+additionalProperties: false
+
examples:
- |
ttc0: ttc0@f8001000 {
clock-names:
maxItems: 4
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/tegra210-car.h>
- interrupts
- interrupt-names
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
VBUS pin of the SoC via a 1/3 voltage divider.
type: boolean
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 2
+
+patternProperties:
+ "^usb@":
+ type: object
+
required:
- compatible
- reg
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/soc/ti,sci_pm_domain.h>
projects / platform / kernel / linux-rpi.git / commitdiff