usb: dwc3: ep0: handle delayed_status again
authorSebastian Andrzej Siewior <bigeasy@linutronix.de>
Wed, 2 Nov 2011 12:30:45 +0000 (13:30 +0100)
committerFelipe Balbi <balbi@ti.com>
Mon, 12 Dec 2011 09:48:31 +0000 (11:48 +0200)
Since the re-worked ep0 handling (which uses HW's hints to recognize the ep0
status) we lost the delayed status handling. This is used by the file and mass
storage gadget to gain some extra time so setup its internal status before it
can proceed further requests.
In particular the storage gadget does nothing on USB_REQ_SET_CONFIGURATION but
wakes up a thread which handles the request. If the udc driver continues ep0
handling before the thread did its work then then endpoint is not yet
configured and further requests will fail. Once the gadget is ready, it will
enqueue an empty packet which is used for synchronization.
In order to fix this issue, the patch does the following:
Set ->delayed_status once the delayed_status has been notices and do not
continue on the next XferNotReady event. We will continues ep0 processing once
the gadget enqueued the zero packet for synchronization.

A cleaner approach would be to enforce the gadget to enqueue an empty
(zero) request even for the status phase but this would do for now.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/dwc3/core.h
drivers/usb/dwc3/ep0.c

index cecff56..dc2db16 100644 (file)
@@ -631,6 +631,7 @@ struct dwc3 {
        unsigned                ep0_bounced:1;
        unsigned                ep0_expect_in:1;
        unsigned                start_config_issued:1;
+       unsigned                delayed_status:1;
 
        enum dwc3_ep0_next      ep0_next_event;
        enum dwc3_ep0_state     ep0state;
index 333278c..314acb2 100644 (file)
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
 
 #include "core.h"
 #include "gadget.h"
 #include "io.h"
 
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum);
+
 static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
 {
        switch (state) {
@@ -122,6 +125,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
                struct dwc3_request *req)
 {
+       struct dwc3             *dwc = dep->dwc;
+       u32                     type;
        int                     ret = 0;
 
        req->request.actual     = 0;
@@ -140,9 +145,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
         * IRQ we were waiting for is long gone.
         */
        if (dep->flags & DWC3_EP_PENDING_REQUEST) {
-               struct dwc3     *dwc = dep->dwc;
                unsigned        direction;
-               u32             type;
 
                direction = !!(dep->flags & DWC3_EP0_DIR_IN);
 
@@ -162,6 +165,10 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
                                req->request.dma, req->request.length, type);
                dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
                                DWC3_EP0_DIR_IN);
+
+       } else if (dwc->delayed_status && (dwc->ep0state == EP0_STATUS_PHASE)) {
+               dwc->delayed_status = false;
+               dwc3_ep0_do_control_status(dwc, 1);
        }
 
        return ret;
@@ -211,6 +218,7 @@ static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
        /* stall is always issued on EP0 */
        __dwc3_gadget_ep_set_halt(dep, 1);
        dep->flags = DWC3_EP_ENABLED;
+       dwc->delayed_status = false;
 
        if (!list_empty(&dep->request_list)) {
                struct dwc3_request     *req;
@@ -472,8 +480,10 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
                if (!cfg)
                        dwc->dev_state = DWC3_ADDRESS_STATE;
                break;
+       default:
+               ret = -EINVAL;
        }
-       return 0;
+       return ret;
 }
 
 static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
@@ -536,6 +546,9 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
        else
                ret = dwc3_ep0_delegate_req(dwc, ctrl);
 
+       if (ret == USB_GADGET_DELAYED_STATUS)
+               dwc->delayed_status = true;
+
        if (ret >= 0)
                return;
 
@@ -801,6 +814,13 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
                        dwc3_ep0_stall_and_restart(dwc);
                        return;
                }
+
+               if (dwc->delayed_status) {
+                       WARN_ON_ONCE(event->endpoint_number != 1);
+                       dev_vdbg(dwc->dev, "Mass Storage delayed status\n");
+                       return;
+               }
+
                dwc3_ep0_do_control_status(dwc, event->endpoint_number);
        }
 }