staging: mt7621-dts: fix GB-PC2 devicetree

Fix the GB-PC2 devicetree. Refer to the schematics of the device for more
information.

GB-PC2 devicetree fixes:
- Include mt7621.dtsi instead of gbpc1.dts. Add the missing definitions.
- Remove gpio-leds node as the system LED is not wired to anywhere on
the board and the power LED is directly wired to GND.
- Remove uart3 pin group from gpio-pinmux node as it's not used as GPIO.
- Use reg 7 for the external phy to be on par with
Documentation/devicetree/bindings/net/dsa/mt7530.txt.
- Use the status value "okay".

Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220311090320.3068-2-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/mt7621-dts/gbpc2.dts b/drivers/staging/mt7621-dts/gbpc2.dts
index 03d6bb6..a7fce8d 100644 (file)
--- a/drivers/staging/mt7621-dts/gbpc2.dts
+++ b/drivers/staging/mt7621-dts/gbpc2.dts
@@ -1,28 +1,122 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /dts-v1/;
 
-#include "gbpc1.dts"
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
        compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc";
        model = "GB-PC2";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x00000000 0x1c000000>,
+                     <0x20000000 0x04000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       palmbus: palmbus@1e000000 {
+               i2c@900 {
+                       status = "okay";
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
 };
 
-&default_gpio {
-       groups = "wdt", "uart3";
-       function = "gpio";
+&sdhci {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+               broken-flash-reset;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x1fb0000>;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: state-default {
+               gpio-pinmux {
+                       groups = "wdt";
+                       function = "gpio";
+               };
+       };
 };
 
 &ethernet {
        gmac1: mac@1 {
-               status = "ok";
-               phy-handle = <&phy_external>;
+               status = "okay";
+               phy-handle = <&ethphy7>;
        };
 
        mdio-bus {
-               phy_external: ethernet-phy@5 {
-                       reg = <5>;
+               ethphy7: ethernet-phy@7 {
+                       reg = <7>;
                        phy-mode = "rgmii-rxid";
                };
        };
 };
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "ethblack";
+               };
+
+               port@4 {
+                       status = "okay";
+                       label = "ethblue";
+               };
+       };
+};