--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 SolidRun ltd
+ */
+
+#include "armada-8040.dtsi"
+
+/ {
+ model = "ClearFog-GT-8K";
+ compatible = "solidrun,clearfog-gt-8k",
+ "marvell,armada8040";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cpm_i2c0;
+ i2c1 = &cpm_i2c1;
+ spi0 = &cps_spi1;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ simple-bus {
+ compatible = "simple-bus";
+
+ reg_usb3h0_vbus: usb3-vbus0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ regulator-name = "reg-usb3h0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <300000>;
+ shutdown-delay-us = <500000>;
+ regulator-force-boot-off;
+ gpio = <&cpm_gpio1 15 GPIO_ACTIVE_LOW>; /* GPIO[47] */
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&ap_pinctl {
+ /*
+ * MPP Bus:
+ * eMMC [0-10]
+ * UART0 [11,19]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 1 1 1 1 1 1 1 1 1 1
+ 1 3 0 0 0 0 0 0 0 3 >;
+};
+
+/* on-board eMMC */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_emmc_pins>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&cpm_pinctl {
+ /*
+ * MPP Bus:
+ * [0-31] = 0xff: Keep default CP0_shared_pins:
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32, 33, 34] pci0/1/2 reset
+ * [35-38] CP0 I2C1 and I2C0
+ * [39] GPIO reset button
+ * [40,41] LED0 and LED1
+ * [43] 1512 phy reset
+ * [47] USB VBUS EN (active low)
+ * [48] FAN PWM
+ * [49] SFP+ present signal
+ * [50] TPM interrupt
+ * [51] WLAN0 disable
+ * [52] WLAN1 disable
+ * [53] LTE disable
+ * [54] NFC reset
+ * [55] Micro SD card detect
+ * [56-61] Micro SD
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0 0 0 0 2 2 2 2 0
+ 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0xe 0xe 0xe 0xe
+ 0xe 0xe 0 >;
+
+ cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
+ marvell,pins = < 47 >;
+ marvell,function = <0>;
+ };
+
+ cps_1g_phy_reset: cps-1g-phy-reset {
+ marvell,pins = < 43 >;
+ marvell,function = <0>;
+ };
+};
+
+/* uSD slot */
+&cpm_sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_sdhci_pins>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&cpm_pcie0 {
+ num-lanes = <1>;
+ status = "okay";
+};
+
+&cpm_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpm_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c1_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpm_sata0 {
+ status = "okay";
+};
+
+&cpm_comphy {
+ /*
+ * CP0 Serdes Configuration:
+ * Lane 0: PCIe0 (x1)
+ * Lane 1: Not connected
+ * Lane 2: SFI (10G)
+ * Lane 3: Not connected
+ * Lane 4: USB 3.0 host port1 (can be PCIe)
+ * Lane 5: Not connected
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_SFI>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_USB3_HOST1>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+};
+
+&cpm_ethernet {
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+/* 10G SFI SFP */
+&cpm_eth0 {
+ status = "okay";
+ phy-mode = "sfi";
+};
+
+&cps_sata0 {
+ status = "okay";
+};
+
+&cps_usb3_0 {
+ vbus-supply = <®_usb3h0_vbus>;
+ status = "okay";
+};
+
+&cps_utmi0 {
+ status = "okay";
+};
+
+&cps_pinctl {
+ /*
+ * MPP Bus:
+ * [0-5] TDM
+ * [6] VHV Enable
+ * [7] CP1 SPI0 CSn1 (FXS)
+ * [8] CP1 SPI0 CSn0 (TPM)
+ * [9.11]CP1 SPI0 MOSI/MISO/CLK
+ * [13] CP1 SPI1 MISO (TDM and SPI ROM shared)
+ * [14] CP1 SPI1 CS0n (64Mb SPI ROM)
+ * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared)
+ * [16] CP1 SPI1 CLK (TDM and SPI ROM shared)
+ * [24] Topaz switch reset
+ * [26] Buzzer
+ * [27] CP1 SMI MDIO
+ * [28] CP1 SMI MDC
+ * [29] CP0 10G SFP TX Disable
+ * [30] WPS button
+ * [31] Front panel button
+ * [32-62] = 0xff: Keep default CP1_shared_pins:
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x4 0x4 0x4 0x4 0x4 0x4 0x0 0x4 0x4 0x4
+ 0x4 0x4 0x0 0x3 0x3 0x3 0x3 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0x0 0xff 0x0 0x8 0x8 0x0
+ 0x0 0x0 0x0 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff>;
+};
+
+&cps_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "jedec,spi-nor", "spi-flash";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@200000 {
+ label = "Filesystem";
+ reg = <0x200000 0xce0000>;
+ };
+ };
+ };
+};
+
+&cps_comphy {
+ /*
+ * CP1 Serdes Configuration:
+ * Lane 0: SATA 1 (RX swapped). Can be PCIe0
+ * Lane 1: Not used
+ * Lane 2: USB HOST 0
+ * Lane 3: SGMII1 - Connected to 1512 port
+ * Lane 4: Not used
+ * Lane 5: SGMII2 - Connected to Topaz switch
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_SATA1>;
+ phy-invert = <PHY_POLARITY_RXD_INVERT>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_USB3_HOST0>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_SGMII1>;
+ phy-speed = <PHY_SPEED_1_25G>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_SGMII2>;
+ phy-speed = <PHY_SPEED_3_125G>;
+ };
+};
+
+&cps_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cps_ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_1g_phy_reset>;
+ status = "okay";
+};
+
+/* 1G SGMII */
+&cps_eth1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy = <&phy0>;
+ phy-reset-gpios = <&cpm_gpio1 11 GPIO_ACTIVE_LOW>;
+};
+
+/* 2.5G to Topaz switch */
+&cps_eth2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-speed = <2500>;
+ phy-reset-gpios = <&cps_gpio0 24 GPIO_ACTIVE_LOW>;
+};
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00000000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_MVEBU_ARMADA_8K=y
+CONFIG_DEBUG_UART_BASE=0xf0512000
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEFAULT_DEVICE_TREE="armada-8040-clearfog-gt-8k"
+CONFIG_SMBIOS_PRODUCT_NAME=""
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_BOARD_EARLY_INIT_F=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_MAC_PARTITION=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_GIGE=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCIE_DW_MVEBU=y
+CONFIG_MVEBU_COMPHY_SUPPORT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_8K=y
+CONFIG_DM_REGULATOR_FIXED=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_SMBIOS_MANUFACTURER=""
projects / platform / kernel / u-boot.git / commitdiff