#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
#include <mach/regs-gpio.h>
-#include <mach/pmu.h>
#include <plat/cpu.h>
#include <plat/clock.h>
extern void exynos_cpu_die(unsigned int cpu);
+/* PMU(Power Management Unit) support */
+
+#define PMU_TABLE_END NULL
+
+enum sys_powerdown {
+ SYS_AFTR,
+ SYS_LPA,
+ SYS_SLEEP,
+ NUM_SYS_POWERDOWN,
+};
+
+extern unsigned long l2x0_regs_phys;
+struct exynos_pmu_conf {
+ void __iomem *reg;
+ unsigned int val[NUM_SYS_POWERDOWN];
+};
+
+extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+extern void s3c_cpu_resume(void);
+
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
#include <asm/cpuidle.h>
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
-#include <mach/pmu.h>
#include <plat/cpu.h>
+#include "common.h"
+
#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
-#include <mach/regs-audss.h>
+
+#define EXYNOS4_AUDSS_INT_MEM (0x03000000)
static int exynos4_cfg_i2s(struct platform_device *pdev)
{
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS4210 - PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PMU_H
-#define __ASM_ARCH_PMU_H __FILE__
-
-#define PMU_TABLE_END NULL
-
-enum sys_powerdown {
- SYS_AFTR,
- SYS_LPA,
- SYS_SLEEP,
- NUM_SYS_POWERDOWN,
-};
-
-extern unsigned long l2x0_regs_phys;
-struct exynos_pmu_conf {
- void __iomem *reg;
- unsigned int val[NUM_SYS_POWERDOWN];
-};
-
-extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
-
-#endif /* __ASM_ARCH_PMU_H */
+++ /dev/null
-/* arch/arm/mach-exynos4/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- * http://www.samsung.com
- *
- * Exynos4 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define EXYNOS4_AUDSS_INT_MEM (0x03000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <mach/pm-core.h>
-#include <mach/pmu.h>
+
+#include "common.h"
static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, },
#include <linux/bug.h>
#include <mach/regs-clock.h>
-#include <mach/pmu.h>
+
+#include "common.h"
static struct exynos_pmu_conf *exynos_pmu_config;
obj-n :=
obj- :=
-obj-$(CONFIG_CPU_S3C2440) += dsc.o
-
obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/dsc.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Drive Strength Control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-
-int s3c2440_set_dsc(unsigned int pin, unsigned int value)
-{
- void __iomem *base;
- unsigned long val;
- unsigned long flags;
- unsigned long mask;
-
- base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
- mask = 3 << S3C2440_DSC_GETSHIFT(pin);
-
- local_irq_save(flags);
-
- val = __raw_readl(base);
- val &= ~mask;
- val |= value & mask;
- __raw_writel(val, base);
-
- local_irq_restore(flags);
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2440_set_dsc);
--- /dev/null
+/*
+ * Copyright (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ * ANUBIS - IRQ Number definitions
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_ANUBIS_H
+#define __MACH_S3C24XX_ANUBIS_H __FILE__
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL (0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK (0x7)
+
+/* irq */
+
+#define ANUBIS_IRQ_IDE0 IRQ_EINT2
+#define ANUBIS_IRQ_IDE1 IRQ_EINT3
+#define ANUBIS_IRQ_ASIX IRQ_EINT1
+
+/* map */
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000)
+#define ANUBIS_PA_CTRL1 ANUBIS_PA_CPLD
+
+#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000)
+#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3 << 23))
+
+#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
+
+#endif /* __MACH_S3C24XX_ANUBIS_H */
#include <asm/mach/irq.h>
#include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
+
+#include "bast.h"
/* IDE ports */
.ioport_shift = 5,
};
-#define IDE_CS S3C2410_CS5
-
static struct resource bast_ide0_resource[] = {
- [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
- [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
- [2] = DEFINE_RES_IRQ(IRQ_IDE0),
+ [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
+ [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
+ [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
};
static struct platform_device bast_device_ide0 = {
};
static struct resource bast_ide1_resource[] = {
- [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
- [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
- [2] = DEFINE_RES_IRQ(IRQ_IDE1),
+ [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
+ [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
+ [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
};
static struct platform_device bast_device_ide1 = {
#include <linux/device.h>
#include <linux/io.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
#include <asm/irq.h>
-
+#include <asm/mach-types.h>
#include <asm/mach/irq.h>
+#include <mach/hardware.h>
#include <mach/regs-irq.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
#include <plat/irq.h>
-#if 0
-#include <asm/debug-ll.h>
-#endif
+#include "bast.h"
#define irqdbf(x...)
#define irqdbf2(x...)
-
/* handle PC104 ISA interrupts from the system CPLD */
/* table of ISA irq nos to the relevant mask... zero means
static void
bast_pc104_maskack(struct irq_data *data)
{
- struct irq_desc *desc = irq_desc + IRQ_ISA;
+ struct irq_desc *desc = irq_desc + BAST_IRQ_ISA;
bast_pc104_mask(data);
desc->irq_data.chip->irq_ack(&desc->irq_data);
if (unlikely(stat == 0)) {
/* ack if we get an irq with nothing (ie, startup) */
- desc = irq_desc + IRQ_ISA;
+ desc = irq_desc + BAST_IRQ_ISA;
desc->irq_data.chip->irq_ack(&desc->irq_data);
} else {
/* handle the IRQ */
__raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
- irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux);
+ irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
/* register our IRQs */
--- /dev/null
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ * BAST - IRQ Number definitions
+ * BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_BAST_H
+#define __MACH_S3C24XX_BAST_H __FILE__
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF (0x00)
+#define BAST_CPLD_CTRL1_LRCADC (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC (0x02)
+#define BAST_CPLD_CTRL1_LRCARM (0x03)
+#define BAST_CPLD_CTRL1_LRMASK (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND (0x04)
+#define BAST_CPLD_CTLR2_IDERST (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT (0x01)
+#define BAST_CPLD_CTRL4_LCDRW (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD (0x04)
+#define BAST_CPLD_CTRL4_LCDE2 (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE (0)
+#define BAST_CPLD_DMA0_SECIDE (1)
+#define BAST_CPLD_DMA0_ISA15 (2)
+#define BAST_CPLD_DMA0_ISA36 (3)
+
+#define BAST_CPLD_DMA1_PRIIDE (0 << 2)
+#define BAST_CPLD_DMA1_SECIDE (1 << 2)
+#define BAST_CPLD_DMA1_ISA15 (2 << 2)
+#define BAST_CPLD_DMA1_ISA36 (3 << 2)
+
+/* irq numbers to onboard peripherals */
+
+#define BAST_IRQ_USBOC IRQ_EINT18
+#define BAST_IRQ_IDE0 IRQ_EINT16
+#define BAST_IRQ_IDE1 IRQ_EINT17
+#define BAST_IRQ_PCSERIAL1 IRQ_EINT15
+#define BAST_IRQ_PCSERIAL2 IRQ_EINT14
+#define BAST_IRQ_PCPARALLEL IRQ_EINT13
+#define BAST_IRQ_ASIX IRQ_EINT11
+#define BAST_IRQ_DM9000 IRQ_EINT10
+#define BAST_IRQ_ISA IRQ_EINT9
+#define BAST_IRQ_SMALERT IRQ_EINT8
+
+/* map */
+
+/*
+ * ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000)
+#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000)
+#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000)
+#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000)
+#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000)
+#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000)
+#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000)
+#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1 (0x8800000)
+#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1 (0x8000000)
+#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1 (0x9800000)
+#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1 (0x9000000)
+#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2 (0xA800000)
+#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2 (0xA000000)
+#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2 (0xB800000)
+#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2 (0xB000000)
+#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
+
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VAM_CS2 (0x00000000)
+#define BAST_VAM_CS3 (0x04000000)
+#define BAST_VAM_CS4 (0x08000000)
+#define BAST_VAM_CS5 (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO (0x00000000)
+#define BAST_PA_ASIXNET (0x01000000)
+#define BAST_PA_SUPERIO (0x01800000)
+#define BAST_PA_IDEPRI (0x02000000)
+#define BAST_PA_IDEPRIAUX (0x02800000)
+#define BAST_PA_IDESEC (0x03000000)
+#define BAST_PA_IDESECAUX (0x03800000)
+#define BAST_PA_ISAMEM (0x04000000)
+#define BAST_PA_DM9000 (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
+
+#define BAST_ASIXNET_CS BAST_VAM_CS5
+#define BAST_DM9000_CS BAST_VAM_CS4
+
+#define BAST_IDE_CS S3C2410_CS5
+
+#endif /* __MACH_S3C24XX_BAST_H */
-#ifndef _GTA02_H
-#define _GTA02_H
+/*
+ * GTA02 header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_GTA02_H
+#define __MACH_S3C24XX_GTA02_H __FILE__
#include <mach/regs-gpio.h>
#define GTA02_IRQ_PCF50633 IRQ_EINT9
-#endif /* _GTA02_H */
+#endif /* __MACH_S3C24XX_GTA02_H */
#include <linux/gpio.h>
#include <linux/rfkill.h>
-#include <mach/regs-gpio.h>
#include <mach/hardware.h>
-#include <mach/h1940-latch.h>
-#include <mach/h1940.h>
+#include <mach/regs-gpio.h>
+
+#include "h1940.h"
#define DRV_NAME "h1940-bt"
-/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+/*
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
*
* Copyright (c) 2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- * iPAQ H1940 series - latch definitions
+ * iPAQ H1940 series definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_H1940_LATCH_H
-#define __ASM_ARCH_H1940_LATCH_H
+#ifndef __MACH_S3C24XX_H1940_H
+#define __MACH_S3C24XX_H1940_H __FILE__
-#include <asm/gpio.h>
+#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT (0x30081000)
+#define H1940_SUSPEND_CHECK (0x30080000)
+
+extern void h1940_pm_return(void);
+extern int h1940_led_blink_set(unsigned gpio, int state,
+ unsigned long *delay_on,
+ unsigned long *delay_off);
+
+#include <linux/gpio.h>
#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14)
#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15)
-#endif /* __ASM_ARCH_H1940_LATCH_H */
+#endif /* __MACH_S3C24XX_H1940_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISCPLD_H
-#define __ASM_ARCH_ANUBISCPLD_H
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL (0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK (0x7)
-
-#endif /* __ASM_ARCH_ANUBISCPLD_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISIRQ_H
-#define __ASM_ARCH_ANUBISIRQ_H
-
-#define IRQ_IDE0 IRQ_EINT2
-#define IRQ_IDE1 IRQ_EINT3
-#define IRQ_ASIX IRQ_EINT1
-
-#endif /* __ASM_ARCH_ANUBISIRQ_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
- *
- * Copyright (c) 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_ANUBISMAP_H
-#define __ASM_ARCH_ANUBISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */
-#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD)
-
-#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */
-#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23))
-
-#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
-
-#endif /* __ASM_ARCH_ANUBISMAP_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTCPLD_H
-#define __ASM_ARCH_BASTCPLD_H
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF (0x00)
-#define BAST_CPLD_CTRL1_LRCADC (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC (0x02)
-#define BAST_CPLD_CTRL1_LRCARM (0x03)
-#define BAST_CPLD_CTRL1_LRMASK (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND (0x04)
-#define BAST_CPLD_CTLR2_IDERST (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT (0x01)
-#define BAST_CPLD_CTRL4_LCDRW (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD (0x04)
-#define BAST_CPLD_CTRL4_LCDE2 (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE (0<<0)
-#define BAST_CPLD_DMA0_SECIDE (1<<0)
-#define BAST_CPLD_DMA0_ISA15 (2<<0)
-#define BAST_CPLD_DMA0_ISA36 (3<<0)
-
-#define BAST_CPLD_DMA1_PRIIDE (0<<2)
-#define BAST_CPLD_DMA1_SECIDE (1<<2)
-#define BAST_CPLD_DMA1_ISA15 (2<<2)
-#define BAST_CPLD_DMA1_ISA36 (3<<2)
-
-#endif /* __ASM_ARCH_BASTCPLD_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTIRQ_H
-#define __ASM_ARCH_BASTIRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC IRQ_EINT18
-#define IRQ_IDE0 IRQ_EINT16
-#define IRQ_IDE1 IRQ_EINT17
-#define IRQ_PCSERIAL1 IRQ_EINT15
-#define IRQ_PCSERIAL2 IRQ_EINT14
-#define IRQ_PCPARALLEL IRQ_EINT13
-#define IRQ_ASIX IRQ_EINT11
-#define IRQ_DM9000 IRQ_EINT10
-#define IRQ_ISA IRQ_EINT9
-#define IRQ_SMALERT IRQ_EINT8
-
-#endif /* __ASM_ARCH_BASTIRQ_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/bast-map.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_BASTMAP_H
-#define __ASM_ARCH_BASTMAP_H
-
-#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */
-#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */
-#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */
-#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */
-#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1 (0x8800000)
-#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1 (0x8000000)
-#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1 (0x9800000)
-#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1 (0x9000000)
-#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2 (0xA800000)
-#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2 (0xA000000)
-#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2 (0xB800000)
-#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2 (0xB000000)
-#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
-
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000 8bit, slow
- * 0x04000000 to 0x08000000 16bit, slow
- * 0x08000000 to 0x0C000000 16bit, net
- * 0x0C000000 to 0x10000000 16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB IDE primary channel
- * 0x02100000 to 0x02200000 1MB IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB IDE secondary channel
- * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- * nGCS2 - 8bit, slow
- * nGCS3 - 16bit, slow
- * nGCS4 - 16bit, net
- * nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO (0x00000000)
-#define BAST_PA_ASIXNET (0x01000000)
-#define BAST_PA_SUPERIO (0x01800000)
-#define BAST_PA_IDEPRI (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM (0x04000000)
-#define BAST_PA_DM9000 (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-/* */
-
-#define BAST_ASIXNET_CS BAST_VAM_CS5
-#define BAST_IDE_CS BAST_VAM_CS5
-#define BAST_DM9000_CS BAST_VAM_CS4
-
-#endif /* __ASM_ARCH_BASTMAP_H */
+++ /dev/null
-#include <plat/gpio-fns.h>
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO bank numbering
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIONRS_H
-#define __MACH_GPIONRS_H
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKG (32*6)
-#define S3C2410_GPIO_BANKH (32*7)
-
-/* GPIO sizes for various SoCs:
- *
- * 2442
- * 2410 2412 2440 2443 2416
- * ---- ---- ---- ---- ----
- * A 23 22 25 16 25
- * B 11 11 11 11 9
- * C 16 15 16 16 16
- * D 16 16 16 16 16
- * E 16 16 16 16 16
- * F 8 8 8 8 8
- * G 16 16 16 16 8
- * H 11 11 9 15 15
- * J -- -- 13 16 --
- * K -- -- -- -- 16
- * L -- -- -- 15 7
- * M -- -- -- 2 2
- */
-
-/* GPIO bank sizes */
-#define S3C2410_GPIO_A_NR (32)
-#define S3C2410_GPIO_B_NR (32)
-#define S3C2410_GPIO_C_NR (32)
-#define S3C2410_GPIO_D_NR (32)
-#define S3C2410_GPIO_E_NR (32)
-#define S3C2410_GPIO_F_NR (32)
-#define S3C2410_GPIO_G_NR (32)
-#define S3C2410_GPIO_H_NR (32)
-#define S3C2410_GPIO_J_NR (32) /* technically 16. */
-#define S3C2410_GPIO_K_NR (32) /* technically 16. */
-#define S3C2410_GPIO_L_NR (32) /* technically 15. */
-#define S3C2410_GPIO_M_NR (32) /* technically 2. */
-
-#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
-#endif
-
-#define S3C2410_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
-
-#ifndef __ASSEMBLY__
-
-enum s3c_gpio_number {
- S3C2410_GPIO_A_START = 0,
- S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
- S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
- S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
- S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
- S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
- S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
- S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
- S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
- S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
- S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
- S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* S3C2410 GPIO number definitions. */
-
-#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
-#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
-#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
-#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
-#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
-#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
-#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
-#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
-#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr))
-#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr))
-#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr))
-#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr))
-
-#endif /* __MACH_GPIONRS_H */
-
+++ /dev/null
-/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C2410 - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-#include <mach/regs-gpio.h>
-
-extern struct samsung_gpio_chip s3c24xx_gpios[];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
-{
- struct samsung_gpio_chip *chip;
-
- if (pin > S3C_GPIO_END)
- return NULL;
-
- chip = &s3c24xx_gpios[pin/32];
- return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
-}
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
-/* arch/arm/mach-s3c2410/include/mach/gpio.h
- *
+/*
* Copyright (c) 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
* devices that need GPIO.
*/
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H __FILE__
+
#ifdef CONFIG_CPU_S3C244X
#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#endif
-#include <mach/gpio-nrs.h>
-#include <mach/gpio-fns.h>
+/*
+ * GPIO sizes for various SoCs:
+ *
+ * 2410 2412 2440 2443 2416
+ * 2442
+ * ---- ---- ---- ---- ----
+ * A 23 22 25 16 25
+ * B 11 11 11 11 9
+ * C 16 15 16 16 16
+ * D 16 16 16 16 16
+ * E 16 16 16 16 16
+ * F 8 8 8 8 8
+ * G 16 16 16 16 8
+ * H 11 11 9 15 15
+ * J -- -- 13 16 --
+ * K -- -- -- -- 16
+ * L -- -- -- 15 7
+ * M -- -- -- 2 2
+ */
+
+/* GPIO bank sizes */
+
+#define S3C2410_GPIO_A_NR (32)
+#define S3C2410_GPIO_B_NR (32)
+#define S3C2410_GPIO_C_NR (32)
+#define S3C2410_GPIO_D_NR (32)
+#define S3C2410_GPIO_E_NR (32)
+#define S3C2410_GPIO_F_NR (32)
+#define S3C2410_GPIO_G_NR (32)
+#define S3C2410_GPIO_H_NR (32)
+#define S3C2410_GPIO_J_NR (32) /* technically 16. */
+#define S3C2410_GPIO_K_NR (32) /* technically 16. */
+#define S3C2410_GPIO_L_NR (32) /* technically 15. */
+#define S3C2410_GPIO_M_NR (32) /* technically 2. */
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+ S3C2410_GPIO_A_START = 0,
+ S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+ S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+ S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+ S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+ S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+ S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+ S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+ S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+ S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+ S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+ S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr))
+
+#include <plat/gpio-cfg.h>
#ifdef CONFIG_CPU_S3C244X
#define S3C_GPIO_END (S3C2410_GPJ(0) + 32)
#else
#define S3C_GPIO_END (S3C2410_GPH(0) + 32)
#endif
+
+#endif /* __MACH_GPIO_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/h1940.h
- *
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_H
-#define __ASM_ARCH_H1940_H
-
-#define H1940_SUSPEND_CHECKSUM (0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT (0x30081000)
-#define H1940_SUSPEND_CHECK (0x30080000)
-
-extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(unsigned gpio, int state,
- unsigned long *delay_on, unsigned long *delay_off);
-
-
-#endif /* __ASM_ARCH_H1940_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/idle.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU Idle controls
-*/
-
-#ifndef __ASM_ARCH_IDLE_H
-#define __ASM_ARCH_IDLE_H __FILE__
-
-/* This allows the over-ride of the default idle code, in case there
- * is any other things to be done over idle (like DVS)
-*/
-
-extern void (*s3c24xx_idle)(void);
-
-extern void s3c24xx_default_idle(void);
-
-#endif /* __ASM_ARCH_IDLE_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
- *
- * Copyright 2005 Simtec Electronics
- * http://www.simtec.co.uk/products/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_OSIRISCPLD_H
-#define __ASM_ARCH_OSIRISCPLD_H
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL (0x3)
-#define OSIRIS_CTRL0_BOOT_INT (1<<3)
-#define OSIRIS_CTRL0_PCMCIA (1<<4)
-#define OSIRIS_CTRL0_FIX8 (1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7)
-
-#define OSIRIS_CTRL1_FIX8 (1<<0)
-
-#define OSIRIS_ID_REVMASK (0x7)
-
-#endif /* __ASM_ARCH_OSIRISCPLD_H */
#ifndef __ASM_ARCH_REGS_GPIO_H
#define __ASM_ARCH_REGS_GPIO_H
-#include <mach/gpio-nrs.h>
-
#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
/* general configuration options */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
- *
- * Copyright 2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_H
-#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
-
-#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET (0x533C2412)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif /* __ASM_ARCH_REGS_S3C2412_H */
-
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- * as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2416_MEM
-#define __ASM_ARM_REGS_S3C2416_MEM
-
-#ifndef S3C2416_MEMREG
-#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-#define S3C2416_BANKCFG S3C2416_MEMREG(0x00)
-#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04)
-#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08)
-#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C)
-
-#define S3C2416_REFRESH S3C2416_MEMREG(0x10)
-#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14)
-
-#endif /* __ASM_ARM_REGS_S3C2416_MEM */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- * as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2416_H
-#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
-
-#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44)
-#define S3C2416_SWRST_RESET (0x533C2416)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif /* __ASM_ARCH_REGS_S3C2416_H */
-
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000CPLD_H
-#define __ASM_ARCH_VR1000CPLD_H
-
-#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
-
-#endif /* __ASM_ARCH_VR1000CPLD_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000IRQ_H
-#define __ASM_ARCH_VR1000IRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC IRQ_EINT19
-#define IRQ_IDE0 IRQ_EINT16
-#define IRQ_IDE1 IRQ_EINT17
-#define IRQ_VR1000_SERIAL IRQ_EINT12
-#define IRQ_VR1000_DM9000A IRQ_EINT10
-#define IRQ_VR1000_DM9000N IRQ_EINT9
-#define IRQ_SMALERT IRQ_EINT8
-
-#endif /* __ASM_ARCH_VR1000IRQ_H */
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_VR1000MAP_H
-#define __ASM_ARCH_VR1000MAP_H
-
-#include <mach/bast-map.h>
-
-#define VR1000_IOADDR(x) BAST_IOADDR(x)
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
-#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
-#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
-#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
-#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000 8bit, slow
- * 0x04000000 to 0x08000000 16bit, slow
- * 0x08000000 to 0x0C000000 16bit, net
- * 0x0C000000 to 0x10000000 16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB IDE primary channel
- * 0x02100000 to 0x02200000 1MB IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB IDE secondary channel
- * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- * nGCS2 - 8bit, slow
- * nGCS3 - 16bit, slow
- * nGCS4 - 16bit, net
- * nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI (0x02000000)
-#define VR1000_PA_IDEPRIAUX (0x02800000)
-#define VR1000_PA_IDESEC (0x03000000)
-#define VR1000_PA_IDESECAUX (0x03800000)
-#define VR1000_PA_DM9000 (0x05000000)
-
-#define VR1000_PA_SERIAL (0x11800000)
-#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS VR1000_VAM_CS4
-
-#endif /* __ASM_ARCH_VR1000MAP_H */
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/anubis-map.h>
-#include <mach/anubis-irq.h>
-#include <mach/anubis-cpld.h>
-
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include "simtec.h"
+#include "anubis.h"
#include "common.h"
+#include "simtec.h"
#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
static struct resource anubis_ide0_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
- [3] = DEFINE_RES_IRQ(IRQ_IDE0),
+ [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
};
static struct platform_device anubis_device_ide0 = {
static struct resource anubis_ide1_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
- [2] = DEFINE_RES_IRQ(IRQ_IDE0),
+ [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
};
static struct platform_device anubis_device_ide1 = {
static struct resource anubis_asix_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
- [1] = DEFINE_RES_IRQ(IRQ_ASIX),
+ [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
};
static struct platform_device anubis_device_asix = {
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <linux/io.h>
+#include <linux/serial_8250.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <net/ax88796.h>
+#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
#include <asm/mach-types.h>
-//#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
-
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/fb.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/serial_8250.h>
+#include <mach/regs-mem.h>
#include <plat/clock.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
+#include <plat/devs.h>
#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/regs-serial.h>
-#include "simtec.h"
+#include "bast.h"
#include "common.h"
+#include "simtec.h"
#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
static struct resource bast_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
- [2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
static struct plat_serial8250_port bast_sio_data[] = {
[0] = {
.mapbase = SERIAL_BASE + 0x2f8,
- .irq = IRQ_PCSERIAL1,
+ .irq = BAST_IRQ_PCSERIAL1,
.flags = SERIAL_FLAGS,
.iotype = UPIO_MEM,
.regshift = 0,
},
[1] = {
.mapbase = SERIAL_BASE + 0x3f8,
- .irq = IRQ_PCSERIAL2,
+ .irq = BAST_IRQ_PCSERIAL2,
.flags = SERIAL_FLAGS,
.iotype = UPIO_MEM,
.regshift = 0,
static struct resource bast_asix_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
- [2] = DEFINE_RES_IRQ(IRQ_ASIX),
+ [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
};
static struct platform_device bast_device_asix = {
/*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
* S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
*
* Copyright (C) 2006-2009 by Openmoko, Inc.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
*/
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
#include <linux/mmc/host.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
#include <linux/regulator/machine.h>
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-#include <linux/mfd/pcf50633/backlight.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
#include <mach/fb.h>
-
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <mach/regs-mem.h>
#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-mem.h>
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/devs.h>
#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
#include "common.h"
+#include "gta02.h"
static struct pcf50633 *gta02_pcf;
-/* linux/arch/arm/mach-s3c2410/mach-h1940.c
- *
+/*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
#include <linux/mmc/host.h>
#include <linux/export.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-clock.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-fns.h>
-#include <mach/gpio-nrs.h>
+#include <sound/uda1380.h>
-#include <mach/h1940.h>
-#include <mach/h1940-latch.h>
#include <mach/fb.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
-#include <plat/gpio-cfg.h>
#include <plat/clock.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
#include <plat/pll.h>
#include <plat/pm.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <plat/regs-serial.h>
-#include <sound/uda1380.h>
#include "common.h"
+#include "h1940.h"
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
-/* linux/arch/arm/mach-s3c2440/mach-osiris.c
- *
+/*
* Copyright (c) 2005-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
#include <linux/i2c/tps65010.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-
-#include <mach/osiris-map.h>
-#include <mach/osiris-cpld.h>
-
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpio-cfg.h>
#include <plat/clock.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/cpu-freq.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-serial.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
#include "common.h"
+#include "osiris.h"
/* onboard perihperal map */
-/* linux/arch/arm/mach-s3c2410/mach-otom.c
+/*
*
* Copyright (c) 2004 Nex Vision
* Guillaume GOURAT <guillaume.gourat@nexvision.fr>
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/otom-map.h>
-
#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
#include <plat/clock.h>
-#include <plat/devs.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+#include <plat/s3c2410.h>
#include "common.h"
+#include "otom.h"
static struct map_desc otom11_iodesc[] __initdata = {
/* Device area */
-/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
- *
+/*
* Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
* Copyright (c) 2007-2010 Vasily Khoruzhick
*
#include <linux/mmc/host.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach-types.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include <sound/uda1380.h>
+
+#include <mach/fb.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <mach/fb.h>
#include <plat/clock.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-iic.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
#include <plat/pm.h>
-#include <plat/irq.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <sound/uda1380.h>
+#include <plat/regs-iic.h>
+#include <plat/regs-serial.h>
#include "common.h"
+#include "h1940.h"
#define LCD_PWM_PERIOD 192960
#define LCD_PWM_DUTY 127353
#include <linux/mtd/partitions.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <mach/fb.h>
-
#include <plat/clock.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
#include <plat/pm.h>
+#include <plat/regs-serial.h>
#include "common.h"
+#include "h1940.h"
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/idle.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
#include <mach/regs-lcd.h>
#include <mach/regs-s3c2443-clock.h>
-#include <mach/idle.h>
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/idle.h>
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/idle.h>
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-/* linux/arch/arm/mach-s3c2410/mach-vr1000.c
- *
+/*
* Copyright (c) 2003-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/bast-map.h>
-#include <mach/vr1000-map.h>
-#include <mach/vr1000-irq.h>
-#include <mach/vr1000-cpld.h>
-
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
#include <plat/clock.h>
-#include <plat/devs.h>
#include <plat/cpu.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
-#include "simtec.h"
+#include "bast.h"
#include "common.h"
+#include "simtec.h"
+#include "vr1000.h"
/* macros for virtual address mods for the io space entries */
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = VR1000_SERIAL_MAPBASE(0),
- .irq = IRQ_VR1000_SERIAL + 0,
+ .irq = VR1000_IRQ_SERIAL + 0,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 0,
},
[1] = {
.mapbase = VR1000_SERIAL_MAPBASE(1),
- .irq = IRQ_VR1000_SERIAL + 1,
+ .irq = VR1000_IRQ_SERIAL + 1,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 0,
},
[2] = {
.mapbase = VR1000_SERIAL_MAPBASE(2),
- .irq = IRQ_VR1000_SERIAL + 2,
+ .irq = VR1000_IRQ_SERIAL + 2,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 0,
},
[3] = {
.mapbase = VR1000_SERIAL_MAPBASE(3),
- .irq = IRQ_VR1000_SERIAL + 3,
+ .irq = VR1000_IRQ_SERIAL + 3,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 0,
static struct resource vr1000_dm9k0_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
- [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
static struct resource vr1000_dm9k1_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
- [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
-#include <mach/idle.h>
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
- *
+/*
* Copyright 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
+ * OSIRIS - CPLD control constants
* OSIRIS - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* published by the Free Software Foundation.
*/
-/* needs arch/map.h including with this */
+#ifndef __MACH_S3C24XX_OSIRIS_H
+#define __MACH_S3C24XX_OSIRIS_H __FILE__
+
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL (0x3)
+#define OSIRIS_CTRL0_BOOT_INT (1<<3)
+#define OSIRIS_CTRL0_PCMCIA (1<<4)
+#define OSIRIS_CTRL0_FIX8 (1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7)
+
+#define OSIRIS_CTRL1_FIX8 (1<<0)
-#ifndef __ASM_ARCH_OSIRISMAP_H
-#define __ASM_ARCH_OSIRISMAP_H
+#define OSIRIS_ID_REVMASK (0x7)
/* start peripherals off after the S3C2410 */
#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000)
#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23))
-#endif /* __ASM_ARCH_OSIRISMAP_H */
+#endif /* __MACH_S3C24XX_OSIRIS_H */
-/* arch/arm/mach-s3c2410/include/mach/otom-map.h
- *
+/*
* (c) 2005 Guillaume GOURAT / NexVision
* guillaume.gourat@nexvision.fr
*
* published by the Free Software Foundation.
*/
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x01300000, now we need to find space for the
+/*
+ * ok, we've used up to 0x01300000, now we need to find space for the
* peripherals that live in the nGCS[x] areas, which are quite numerous
* in their space.
*/
-#ifndef __ASM_ARCH_OTOMMAP_H
-#define __ASM_ARCH_OTOMMAP_H
+#ifndef __MACH_S3C24XX_OTOM_H
+#define __MACH_S3C24XX_OTOM_H __FILE__
-#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
+#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
/* physical offset addresses for the peripherals */
-#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */
+#define OTOM_PA_FLASH0_BASE (S3C2410_CS0)
-#endif /* __ASM_ARCH_OTOMMAP_H */
+#endif /* __MACH_S3C24XX_OTOM_H */
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-
#include <asm/mach-types.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <mach/h1940.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include "h1940.h"
+
static void s3c2410_pm_prepare(void)
{
/* ensure at least GSTATUS3 has the resume address */
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/cacheflush.h>
#include <asm/irq.h>
-#include <mach/regs-power.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
+#include <mach/regs-power.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-
#include <plat/s3c2412.h>
+#include "regs-dsc.h"
+
extern void s3c2412_sleep_enter(void);
static int s3c2412_cpu_suspend(unsigned long arg)
-/* linux/arch/arm/mach-s3c2412/s3c2412.c
- *
+/*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <plat/cpu-freq.h>
-
+#include <mach/hardware.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-#include <plat/regs-spi.h>
-#include <mach/regs-s3c2412.h>
+#include <mach/regs-power.h>
-#include <plat/s3c2412.h>
+#include <plat/clock.h>
#include <plat/cpu.h>
+#include <plat/cpu-freq.h>
#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
#include <plat/nand-core.h>
+#include <plat/pll.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-spi.h>
+#include <plat/s3c2412.h>
+
+#include "regs-dsc.h"
+
+#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET (0x533C2412)
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>
#include <plat/s3c244x.h>
#include <plat/nand-core.h>
#include <plat/watchdog-reset.h>
+#include "regs-dsc.h"
+
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
#include <linux/device.h>
#include <linux/io.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include <plat/devs.h>
+#include "bast.h"
#include "simtec.h"
/* platform ops for audio */
#include <asm/mach/irq.h>
#include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-cpld.h>
+#include "bast.h"
#include "simtec.h"
static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-
#include <mach/hardware.h>
#include <asm/irq.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/devs.h>
+#include "bast.h"
#include "simtec.h"
/* control power and monitor over-current events on various Simtec
int ret;
if (on) {
- ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
+ ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
IRQF_DISABLED | IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"USB Over-current", info);
printk(KERN_ERR "failed to request usb oc irq\n");
}
} else {
- free_irq(IRQ_USBOC, info);
+ free_irq(BAST_IRQ_USBOC, info);
}
}
--- /dev/null
+
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ * Machine VR1000 - IRQ Number definitions
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_VR1000_H
+#define __MACH_S3C24XX_VR1000_H __FILE__
+
+#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
+
+/* irq numbers to onboard peripherals */
+
+#define VR1000_IRQ_USBOC IRQ_EINT19
+#define VR1000_IRQ_IDE0 IRQ_EINT16
+#define VR1000_IRQ_IDE1 IRQ_EINT17
+#define VR1000_IRQ_SERIAL IRQ_EINT12
+#define VR1000_IRQ_DM9000A IRQ_EINT10
+#define VR1000_IRQ_DM9000N IRQ_EINT9
+#define VR1000_IRQ_SMALERT IRQ_EINT8
+
+/* map */
+
+#define VR1000_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
+#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
+#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
+#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
+#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE (0xE0000000)
+
+#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI (0x02000000)
+#define VR1000_PA_IDEPRIAUX (0x02800000)
+#define VR1000_PA_IDESEC (0x03000000)
+#define VR1000_PA_IDESECAUX (0x03800000)
+#define VR1000_PA_DM9000 (0x05000000)
+
+#define VR1000_PA_SERIAL (0x11800000)
+#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS VR1000_VAM_CS4
+
+#endif /* __MACH_S3C24XX_VR1000_H */
#include <mach/hardware.h>
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/clock-clksrc.h>
#include <plat/pll.h>
+#include "regs-sys.h"
+
/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
* ext_xtal_mux for want of an actual name from the manual.
*/
#include <mach/map.h>
-#include <mach/regs-sys.h>
-#include <mach/regs-syscon-power.h>
+#include "regs-sys.h"
+#include "regs-syscon-power.h"
static int s3c64xx_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/regs-sys.h>
-
#include <asm/hardware/pl080.h>
+#include "regs-sys.h"
+
/* dma channel state information */
struct s3c64xx_dmac {
+++ /dev/null
-/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX system register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_SYS_H
-#define __PLAT_REGS_SYS_H __FILE__
-
-#define S3C_SYSREG(x) (S3C_VA_SYS + (x))
-
-#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100)
-#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
-#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
-
-#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
-
-#define S3C64XX_OTHERS S3C_SYSREG(0x900)
-
-#define S3C64XX_OTHERS_USBMASK (1 << 16)
-#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
-
-#endif /* _PLAT_REGS_SYS_H */
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
#include "common.h"
+#include "regs-modem.h"
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
#include <linux/platform_data/spi-s3c64xx.h>
-#include <mach/crag6410.h>
+#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
.line = S3C64XX_GPC(3),
#include <mach/hardware.h>
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/crag6410.h>
-
-#include <mach/regs-gpio-memport.h>
#include <plat/regs-serial.h>
#include <plat/fb.h>
#include <plat/pm.h>
#include "common.h"
+#include "crag6410.h"
+#include "regs-gpio-memport.h"
+#include "regs-modem.h"
+#include "regs-sys.h"
/* serial port setup */
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <video/samsung_fimd.h>
#include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <video/samsung_fimd.h>
#include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <video/platform_lcd.h>
#include "common.h"
+#include "regs-modem.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <mach/regs-modem.h>
#include <mach/regs-gpio.h>
-#include <mach/regs-sys.h>
-#include <mach/regs-srom.h>
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
#include <plat/backlight.h>
#include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
+#include "regs-sys.h"
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
-#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
-#include <mach/regs-syscon-power.h>
-#include <mach/regs-gpio-memport.h>
-#include <mach/regs-modem.h>
+
+#include "regs-gpio-memport.h"
+#include "regs-modem.h"
+#include "regs-sys.h"
+#include "regs-syscon-power.h"
struct s3c64xx_pm_domain {
char *const name;
-/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
- *
+/*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* S3C64XX - GPIO memory port register definitions
*/
-#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
-#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_GPIO_MEMPORT_H
+#define __MACH_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
#define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0)
#define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4)
#define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0)
#define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4)
-#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
+#endif /* __MACH_S3C64XX_REGS_GPIO_MEMPORT_H */
-/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
- *
+/*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* published by the Free Software Foundation.
*/
-#ifndef __PLAT_S3C64XX_REGS_MODEM_H
-#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_MODEM_H
+#define __MACH_S3C64XX_REGS_MODEM_H __FILE__
-#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x))
+#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x))
#define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0)
#define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4)
#define MIFPCON_INT2M_LEVEL (1 << 4)
#define MIFPCON_LCD_BYPASS (1 << 3)
-#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
+#endif /* __MACH_S3C64XX_REGS_MODEM_H */
-/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
- *
+/*
* Copyright 2009 Andy Green <andy@warmcat.com>
*
* S3C64XX SROM definitions
* published by the Free Software Foundation.
*/
-#ifndef __PLAT_REGS_SROM_H
-#define __PLAT_REGS_SROM_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_SROM_H
+#define __MACH_S3C64XX_REGS_SROM_H __FILE__
#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x))
#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0
#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2
#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3
-#define S3C64XX_SROM_BW__CS_MASK 0xf
+#define S3C64XX_SROM_BW__CS_MASK 0xf
#define S3C64XX_SROM_BW__NCS0__SHIFT 0
#define S3C64XX_SROM_BW__NCS1__SHIFT 4
#define S3C64XX_SROM_BCX__TACS__SHIFT 28
#define S3C64XX_SROM_BCX__TACS__MASK 0xf
-#endif /* _PLAT_REGS_SROM_H */
+#endif /* __MACH_S3C64XX_REGS_SROM_H */
--- /dev/null
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C64XX_REGS_SYS_H
+#define __MACH_S3C64XX_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x) (S3C_VA_SYS + (x))
+
+#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108)
+
+#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110)
+
+#define S3C64XX_OTHERS S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK (1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6)
+
+#endif /* __MACH_S3C64XX_REGS_SYS_H */
-/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
- *
+/*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* published by the Free Software Foundation.
*/
-#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
-#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_SYSCON_POWER_H
+#define __MACH_S3C64XX_REGS_SYSCON_POWER_H __FILE__
#define S3C64XX_PWR_CFG S3C_SYSREG(0x804)
#define S3C64XX_INFORM2 S3C_SYSREG(0xA08)
#define S3C64XX_INFORM3 S3C_SYSREG(0xA0C)
-#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
+#endif /* __MACH_S3C64XX_REGS_SYSCON_POWER_H */
#include <linux/io.h>
#include <linux/platform_device.h>
#include <mach/map.h>
-#include <mach/regs-sys.h>
#include <plat/cpu.h>
#include <plat/regs-usb-hsotg-phy.h>
#include <plat/usb-phy.h>
+#include "regs-sys.h"
+
static int s3c_usb_otgphy_init(struct platform_device *pdev)
{
struct clk *xusbxti;
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
+#include "clock.h"
#include "common.h"
static u32 epll_div[][5] = {
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
+#include "clock.h"
#include "common.h"
static struct clksrc_clk clk_mout_dpll = {
-/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
+#ifndef __MACH_S5P64X0_CLOCK_H
+#define __MACH_S5P64X0_CLOCK_H __FILE__
#include <linux/clk.h>
extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
-#endif /* __ASM_ARCH_CLOCK_H */
+#endif /* __MACH_S5P64X0_CLOCK_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p64x0/gpiolib.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/*
- * S5P6440 GPIO bank summary:
- *
- * Bank GPIOs Style SlpCon ExtInt Group
- * A 6 4Bit Yes 1
- * B 7 4Bit Yes 1
- * C 8 4Bit Yes 2
- * F 2 2Bit Yes 4 [1]
- * G 7 4Bit Yes 5
- * H 10 4Bit[2] Yes 6
- * I 16 2Bit Yes None
- * J 12 2Bit Yes None
- * N 16 2Bit No IRQ_EINT
- * P 8 2Bit Yes 8
- * R 15 4Bit[2] Yes 8
- *
- * S5P6450 GPIO bank summary:
- *
- * Bank GPIOs Style SlpCon ExtInt Group
- * A 6 4Bit Yes 1
- * B 7 4Bit Yes 1
- * C 8 4Bit Yes 2
- * D 8 4Bit Yes None
- * F 2 2Bit Yes None
- * G 14 4Bit[2] Yes 5
- * H 10 4Bit[2] Yes 6
- * I 16 2Bit Yes None
- * J 12 2Bit Yes None
- * K 5 4Bit Yes None
- * N 16 2Bit No IRQ_EINT
- * P 11 2Bit Yes 8
- * Q 14 2Bit Yes None
- * R 15 4Bit[2] Yes None
- * S 8 2Bit Yes None
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
- unsigned int offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
- unsigned long flags;
-
- switch (offset) {
- case 6:
- offset += 1;
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- regcon -= 4;
- break;
- default:
- offset -= 7;
- break;
- }
-
- s3c_gpio_lock(ourchip, flags);
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, regcon);
-
- s3c_gpio_unlock(ourchip, flags);
-
- return 0;
-}
-
-static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
- unsigned long dat;
- unsigned long flags;
- unsigned con_offset = offset;
-
- switch (con_offset) {
- case 6:
- con_offset += 1;
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- regcon -= 4;
- break;
- default:
- con_offset -= 7;
- break;
- }
-
- s3c_gpio_lock(ourchip, flags);
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(con_offset));
- con |= 0x1 << con_4bit_shift(con_offset);
-
- dat = __raw_readl(base + GPIODAT_OFF);
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(con, regcon);
- __raw_writel(dat, base + GPIODAT_OFF);
-
- s3c_gpio_unlock(ourchip, flags);
-
- return 0;
-}
-
-int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift;
- u32 con;
-
- switch (off) {
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- shift = (off & 7) * 4;
- reg -= 4;
- break;
- case 6:
- shift = ((off + 1) & 7) * 4;
- reg -= 4;
- default:
- shift = ((off + 1) & 7) * 4;
- break;
- }
-
- if (s3c_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0xf << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
- {
- .cfg_eint = 0,
- }, {
- .cfg_eint = 7,
- }, {
- .cfg_eint = 3,
- .set_config = s5p64x0_gpio_setcfg_4bit_rbank,
- }, {
- .cfg_eint = 0,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- }, {
- .cfg_eint = 2,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- }, {
- .cfg_eint = 3,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .get_config = s3c_gpio_getcfg_s3c24xx,
- },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
- {
- .base = S5P64X0_GPA_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPA(0),
- .ngpio = S5P6440_GPIO_A_NR,
- .label = "GPA",
- },
- }, {
- .base = S5P64X0_GPB_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPB(0),
- .ngpio = S5P6440_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .base = S5P64X0_GPC_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPC(0),
- .ngpio = S5P6440_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .base = S5P64X0_GPG_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPG(0),
- .ngpio = S5P6440_GPIO_G_NR,
- .label = "GPG",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
- {
- .base = S5P64X0_GPH_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6440_GPH(0),
- .ngpio = S5P6440_GPIO_H_NR,
- .label = "GPH",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
- {
- .base = S5P64X0_GPR_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[2],
- .chip = {
- .base = S5P6440_GPR(0),
- .ngpio = S5P6440_GPIO_R_NR,
- .label = "GPR",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
- {
- .base = S5P64X0_GPF_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6440_GPF(0),
- .ngpio = S5P6440_GPIO_F_NR,
- .label = "GPF",
- },
- }, {
- .base = S5P64X0_GPI_BASE,
- .config = &s5p64x0_gpio_cfgs[3],
- .chip = {
- .base = S5P6440_GPI(0),
- .ngpio = S5P6440_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .base = S5P64X0_GPJ_BASE,
- .config = &s5p64x0_gpio_cfgs[3],
- .chip = {
- .base = S5P6440_GPJ(0),
- .ngpio = S5P6440_GPIO_J_NR,
- .label = "GPJ",
- },
- }, {
- .base = S5P64X0_GPN_BASE,
- .config = &s5p64x0_gpio_cfgs[4],
- .chip = {
- .base = S5P6440_GPN(0),
- .ngpio = S5P6440_GPIO_N_NR,
- .label = "GPN",
- },
- }, {
- .base = S5P64X0_GPP_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6440_GPP(0),
- .ngpio = S5P6440_GPIO_P_NR,
- .label = "GPP",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
- {
- .base = S5P64X0_GPA_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPA(0),
- .ngpio = S5P6450_GPIO_A_NR,
- .label = "GPA",
- },
- }, {
- .base = S5P64X0_GPB_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPB(0),
- .ngpio = S5P6450_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .base = S5P64X0_GPC_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPC(0),
- .ngpio = S5P6450_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .base = S5P6450_GPD_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPD(0),
- .ngpio = S5P6450_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .base = S5P6450_GPK_BASE,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPK(0),
- .ngpio = S5P6450_GPIO_K_NR,
- .label = "GPK",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
- {
- .base = S5P64X0_GPG_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPG(0),
- .ngpio = S5P6450_GPIO_G_NR,
- .label = "GPG",
- },
- }, {
- .base = S5P64X0_GPH_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[1],
- .chip = {
- .base = S5P6450_GPH(0),
- .ngpio = S5P6450_GPIO_H_NR,
- .label = "GPH",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
- {
- .base = S5P64X0_GPR_BASE + 0x4,
- .config = &s5p64x0_gpio_cfgs[2],
- .chip = {
- .base = S5P6450_GPR(0),
- .ngpio = S5P6450_GPIO_R_NR,
- .label = "GPR",
- },
- },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
- {
- .base = S5P64X0_GPF_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6450_GPF(0),
- .ngpio = S5P6450_GPIO_F_NR,
- .label = "GPF",
- },
- }, {
- .base = S5P64X0_GPI_BASE,
- .config = &s5p64x0_gpio_cfgs[3],
- .chip = {
- .base = S5P6450_GPI(0),
- .ngpio = S5P6450_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .base = S5P64X0_GPJ_BASE,
- .config = &s5p64x0_gpio_cfgs[3],
- .chip = {
- .base = S5P6450_GPJ(0),
- .ngpio = S5P6450_GPIO_J_NR,
- .label = "GPJ",
- },
- }, {
- .base = S5P64X0_GPN_BASE,
- .config = &s5p64x0_gpio_cfgs[4],
- .chip = {
- .base = S5P6450_GPN(0),
- .ngpio = S5P6450_GPIO_N_NR,
- .label = "GPN",
- },
- }, {
- .base = S5P64X0_GPP_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6450_GPP(0),
- .ngpio = S5P6450_GPIO_P_NR,
- .label = "GPP",
- },
- }, {
- .base = S5P6450_GPQ_BASE,
- .config = &s5p64x0_gpio_cfgs[4],
- .chip = {
- .base = S5P6450_GPQ(0),
- .ngpio = S5P6450_GPIO_Q_NR,
- .label = "GPQ",
- },
- }, {
- .base = S5P6450_GPS_BASE,
- .config = &s5p64x0_gpio_cfgs[5],
- .chip = {
- .base = S5P6450_GPS(0),
- .ngpio = S5P6450_GPIO_S_NR,
- .label = "GPS",
- },
- },
-};
-
-void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chipcfg++) {
- if (!chipcfg->set_config)
- chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit;
- if (!chipcfg->get_config)
- chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit;
- if (!chipcfg->set_pull)
- chipcfg->set_pull = s3c_gpio_setpull_updown;
- if (!chipcfg->get_pull)
- chipcfg->get_pull = s3c_gpio_getpull_updown;
- }
-}
-
-static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
- int nr_chips)
-{
- for (; nr_chips > 0; nr_chips--, chip++) {
- chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
- chip->chip.direction_output =
- s5p64x0_gpiolib_rbank_4bit2_output;
- s3c_gpiolib_add(chip);
- }
-}
-
-static int __init s5p64x0_gpiolib_init(void)
-{
- s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
- ARRAY_SIZE(s5p64x0_gpio_cfgs));
-
- if (soc_is_s5p6450()) {
- samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
- ARRAY_SIZE(s5p6450_gpio_2bit));
-
- samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
- ARRAY_SIZE(s5p6450_gpio_4bit));
-
- samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
- ARRAY_SIZE(s5p6450_gpio_4bit2));
-
- s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
- ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
- } else {
- samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
- ARRAY_SIZE(s5p6440_gpio_2bit));
-
- samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
- ARRAY_SIZE(s5p6440_gpio_4bit));
-
- samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
- ARRAY_SIZE(s5p6440_gpio_4bit2));
-
- s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
- ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
- }
-
- return 0;
-}
-core_initcall(s5p64x0_gpiolib_init);
-/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/i2c.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
#include "common.h"
+#include "i2c.h"
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/i2c.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
#include "common.h"
+#include "i2c.h"
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
#include <plat/gpio-cfg.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/i2c.h>
+#include "i2c.h"
void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
{
#include <plat/gpio-cfg.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/i2c.h>
+#include "i2c.h"
void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
{
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
-#include <mach/regs-audss.h>
+
+#define S5PV210_AUDSS_INT_MEM (0xC0000000)
static int s5pv210_cfg_i2s(struct platform_device *pdev)
{
+++ /dev/null
-/* arch/arm/mach-s5pv210/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- * http://www.samsung.com
- *
- * S5PV210 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define S5PV210_AUDSS_INT_MEM (0xC0000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
+++ /dev/null
-/* arch/arm/mach-s5pv210/include/mach/regs-sys.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - System registers definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C)
-#define S5PV210_USB_PHY0_EN (1 << 0)
-#define S5PV210_USB_PHY1_EN (1 << 1)
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+
#include <mach/map.h>
-#include <mach/regs-sys.h>
+
#include <plat/cpu.h>
#include <plat/regs-usb-hsotg-phy.h>
#include <plat/usb-phy.h>
+#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C)
+#define S5PV210_USB_PHY0_EN (1 << 0)
+#define S5PV210_USB_PHY1_EN (1 << 1)
+
static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
{
struct clk *xusbxti;
#else
/* machine specific code should provide samsung_gpiolib_getchip */
-#include <mach/gpio-track.h>
+extern struct samsung_gpio_chip s3c24xx_gpios[];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
+{
+ struct samsung_gpio_chip *chip;
+
+ if (pin > S3C_GPIO_END)
+ return NULL;
+
+ chip = &s3c24xx_gpios[pin/32];
+ return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
+}
static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
#endif
+++ /dev/null
-#include <plat/gpio-cfg.h>
#include <linux/cpufreq.h>
#include <linux/suspend.h>
-#include <mach/cpufreq.h>
-
#include <plat/cpu.h>
+#include "exynos-cpufreq.h"
+
static struct exynos_dvfs_info *exynos_info;
static struct regulator *arm_regulator;
-/* linux/arch/arm/mach-exynos/include/mach/cpufreq.h
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
#include <linux/cpufreq.h>
#include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
#define CPUFREQ_LEVEL_END L5
#include <linux/cpufreq.h>
#include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
#define CPUFREQ_LEVEL_END (L13 + 1)
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
#define CPUFREQ_LEVEL_END (L15 + 1)
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/gpio-fns.h>
#include <plat/pm.h>
int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
#include <sound/jack.h>
#include <plat/regs-iis.h>
-#include <mach/h1940-latch.h>
#include <asm/mach-types.h>
#include "s3c24xx-i2s.h"
struct snd_kcontrol *kcontrol, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
- gpio_set_value(H1940_LATCH_AUDIO_POWER, 1);
+ gpio_set_value(S3C_GPIO_END + 9, 1);
else
- gpio_set_value(H1940_LATCH_AUDIO_POWER, 0);
+ gpio_set_value(S3C_GPIO_END + 9, 0);
return 0;
}
return -ENODEV;
/* configure some gpios */
- ret = gpio_request(H1940_LATCH_AUDIO_POWER, "speaker-power");
+ ret = gpio_request(S3C_GPIO_END + 9, "speaker-power");
if (ret)
goto err_out;
- ret = gpio_direction_output(H1940_LATCH_AUDIO_POWER, 0);
+ ret = gpio_direction_output(S3C_GPIO_END + 9, 0);
if (ret)
goto err_gpio;
err_plat:
platform_device_put(s3c24xx_snd_device);
err_gpio:
- gpio_free(H1940_LATCH_AUDIO_POWER);
+ gpio_free(S3C_GPIO_END + 9);
err_out:
return ret;
platform_device_unregister(s3c24xx_snd_device);
snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
hp_jack_gpios);
- gpio_free(H1940_LATCH_AUDIO_POWER);
+ gpio_free(S3C_GPIO_END + 9);
}
module_init(h1940_init);
{
gta02_speaker_enabled = ucontrol->value.integer.value[0];
- gpio_set_value(GTA02_GPIO_HP_IN, !gta02_speaker_enabled);
+ gpio_set_value(S3C2410_GPJ(2), !gta02_speaker_enabled);
return 0;
}
static int lm4853_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event));
+ gpio_set_value(S3C2410_GPJ(1), SND_SOC_DAPM_EVENT_OFF(event));
return 0;
}
};
static const struct gpio neo1973_gta02_gpios[] = {
- { GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
- { GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
+ { S3C2410_GPJ(2), GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
+ { S3C2410_GPJ(1), GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
};
static struct snd_soc_card neo1973 = {
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff