Makefile: Reduce usage of custom mpc85xx u-boot.bin target

Building of final u-boot.bin binary for mpc85xx via binman is needed only
when inserting DTB binary in the middle of the u-boot ELF binary (before
.bootpg and .resetvec ELF sections).

These requirements are met when CONFIG_MPC85XX_HAVE_RESET_VECTOR is enabled
(= generating .bootpg/.resetvec sections) and CONFIG_OF_SEPARATE is enabled
(= inserting DTB binary).

So in all other cases use standard build procedure instead of custom
mpc85xx u-boot.bin Makefile target via binman.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>

diff --git a/Makefile b/Makefile
index b1dc785..11662c5 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1213,12 +1213,12 @@ else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.)
 u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
        $(call if_changed,cat)
 
-ifneq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
 u-boot.bin: u-boot-dtb.bin FORCE
        $(call if_changed,copy)
 endif
 
-else ifneq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+else ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
 u-boot.bin: u-boot-nodtb.bin FORCE
        $(call if_changed,copy)
 endif
@@ -1598,17 +1598,14 @@ u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
 
 endif
 
-ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
-u-boot.bin: u-boot-nodtb.bin u-boot.dtb \
-       $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
+ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+u-boot.bin: u-boot-nodtb.bin u-boot.dtb u-boot-br.bin FORCE
        $(call if_changed,binman)
 
-ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
 OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
 u-boot-br.bin: u-boot FORCE
        $(call if_changed,objcopy)
 endif
-endif
 
 quiet_cmd_ldr = LD      $@
 cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2cb5dae..3b518c2 100644 (file)
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -21,7 +21,7 @@ config MPC85xx
        select SYS_FSL_DDR
        select SYS_FSL_DDR_BE
        select SYS_FSL_IFC_BE
-       select BINMAN if OF_SEPARATE
+       select BINMAN if MPC85XX_HAVE_RESET_VECTOR && OF_SEPARATE
        imply CMD_HASH
        imply CMD_IRQ
        imply USB_EHCI_HCD if USB

diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi
index 0251afd..6588bb7 100644 (file)
--- a/arch/powerpc/dts/u-boot.dtsi
+++ b/arch/powerpc/dts/u-boot.dtsi
@@ -5,6 +5,8 @@
 
 #include <config.h>
 
+#if defined(CONFIG_MPC85XX_HAVE_RESET_VECTOR) && defined(CONFIG_OF_SEPARATE)
+
 / {
        binman {
                filename = "u-boot.bin";
@@ -19,17 +21,15 @@
                };
 
                u-boot-dtb-with-ucode {
-#ifdef CONFIG_MPC85xx
                        align = <4>;
-#endif
                };
-#ifdef CONFIG_MPC85XX_HAVE_RESET_VECTOR
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 #endif
                powerpc-mpc85xx-bootpg-resetvec {
                        offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>;
                };
-#endif
        };
 };
+
+#endif