staging:iio:light:tsl2563 drop unnecessary brackets around constants.

Not sure why these were ever there.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>

diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index 1a9adc0..1ee0a6f 100644 (file)
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -41,49 +41,49 @@
 #include "tsl2563.h"
 
 /* Use this many bits for fraction part. */
-#define ADC_FRAC_BITS          (14)
+#define ADC_FRAC_BITS          14
 
 /* Given number of 1/10000's in ADC_FRAC_BITS precision. */
 #define FRAC10K(f)             (((f) * (1L << (ADC_FRAC_BITS))) / (10000))
 
 /* Bits used for fraction in calibration coefficients.*/
-#define CALIB_FRAC_BITS                (10)
+#define CALIB_FRAC_BITS                10
 /* 0.5 in CALIB_FRAC_BITS precision */
 #define CALIB_FRAC_HALF                (1 << (CALIB_FRAC_BITS - 1))
 /* Make a fraction from a number n that was multiplied with b. */
 #define CALIB_FRAC(n, b)       (((n) << CALIB_FRAC_BITS) / (b))
 /* Decimal 10^(digits in sysfs presentation) */
-#define CALIB_BASE_SYSFS       (1000)
-
-#define TSL2563_CMD            (0x80)
-#define TSL2563_CLEARINT       (0x40)
-
-#define TSL2563_REG_CTRL       (0x00)
-#define TSL2563_REG_TIMING     (0x01)
-#define TSL2563_REG_LOWLOW     (0x02) /* data0 low threshold, 2 bytes */
-#define TSL2563_REG_LOWHIGH    (0x03)
-#define TSL2563_REG_HIGHLOW    (0x04) /* data0 high threshold, 2 bytes */
-#define TSL2563_REG_HIGHHIGH   (0x05)
-#define TSL2563_REG_INT                (0x06)
-#define TSL2563_REG_ID         (0x0a)
-#define TSL2563_REG_DATA0LOW   (0x0c) /* broadband sensor value, 2 bytes */
-#define TSL2563_REG_DATA0HIGH  (0x0d)
-#define TSL2563_REG_DATA1LOW   (0x0e) /* infrared sensor value, 2 bytes */
-#define TSL2563_REG_DATA1HIGH  (0x0f)
-
-#define TSL2563_CMD_POWER_ON   (0x03)
-#define TSL2563_CMD_POWER_OFF  (0x00)
-#define TSL2563_CTRL_POWER_MASK        (0x03)
-
-#define TSL2563_TIMING_13MS    (0x00)
-#define TSL2563_TIMING_100MS   (0x01)
-#define TSL2563_TIMING_400MS   (0x02)
-#define TSL2563_TIMING_MASK    (0x03)
-#define TSL2563_TIMING_GAIN16  (0x10)
-#define TSL2563_TIMING_GAIN1   (0x00)
-
-#define TSL2563_INT_DISBLED    (0x00)
-#define TSL2563_INT_LEVEL      (0x10)
+#define CALIB_BASE_SYSFS       1000
+
+#define TSL2563_CMD            0x80
+#define TSL2563_CLEARINT       0x40
+
+#define TSL2563_REG_CTRL       0x00
+#define TSL2563_REG_TIMING     0x01
+#define TSL2563_REG_LOWLOW     0x02 /* data0 low threshold, 2 bytes */
+#define TSL2563_REG_LOWHIGH    0x03
+#define TSL2563_REG_HIGHLOW    0x04 /* data0 high threshold, 2 bytes */
+#define TSL2563_REG_HIGHHIGH   0x05
+#define TSL2563_REG_INT                0x06
+#define TSL2563_REG_ID         0x0a
+#define TSL2563_REG_DATA0LOW   0x0c /* broadband sensor value, 2 bytes */
+#define TSL2563_REG_DATA0HIGH  0x0d
+#define TSL2563_REG_DATA1LOW   0x0e /* infrared sensor value, 2 bytes */
+#define TSL2563_REG_DATA1HIGH  0x0f
+
+#define TSL2563_CMD_POWER_ON   0x03
+#define TSL2563_CMD_POWER_OFF  0x00
+#define TSL2563_CTRL_POWER_MASK        0x03
+
+#define TSL2563_TIMING_13MS    0x00
+#define TSL2563_TIMING_100MS   0x01
+#define TSL2563_TIMING_400MS   0x02
+#define TSL2563_TIMING_MASK    0x03
+#define TSL2563_TIMING_GAIN16  0x10
+#define TSL2563_TIMING_GAIN1   0x00
+
+#define TSL2563_INT_DISBLED    0x00
+#define TSL2563_INT_LEVEL      0x10
 #define TSL2563_INT_PERSIST(n) ((n) & 0x0F)
 
 struct tsl2563_gainlevel_coeff {