powerpc/mpc8548: Add workaround for erratum NMG_DDR120

Erratum NMG_DDR120 (DDR19 in MPC8548 errata document) applies to some
early version silicons. The default settings of the DDR IO receiver
biasing may not work at cold temperature. When a failure occurs,
a DDR input latches an incorrect value. The workaround will set the
receiver to an acceptable bias point.

Signed-off-by: Gong Chen
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 0478ec1..f0fa0f5 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -96,6 +96,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
        puts("Work-around for Erratum IFC A-003399 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+       if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
+               puts("Work-around for Erratum NMG DDR120 enabled\n");
+#endif
        return 0;
 }
 

diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
index 10f3685..49000a1 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
@@ -8,6 +8,7 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/processor.h>
 #include <asm/fsl_ddr_sdram.h>
 
 #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
@@ -22,6 +23,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC83xx_DDR_ADDR;
 #else
        ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+       ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+       uint svr;
+#endif
 #endif
 
        if (ctrl_num) {
@@ -29,6 +34,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
                return;
        }
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+       /*
+        * Set the DDR IO receiver to an acceptable bias point.
+        * Fixed in Rev 2.1.
+        */
+       svr = get_svr();
+       if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) {
+               if ((regs->ddr_sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) ==
+                  SDRAM_CFG_SDRAM_TYPE_DDR2)
+                       out_be32(&gur->ddrioovcr, 0x90000000);
+               else
+                       out_be32(&gur->ddrioovcr, 0xA8000000);
+       }
+#endif
+
        for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
                if (i == 0) {
                        out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index f9bf80d..a0a12b2 100644 (file)
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -62,6 +62,7 @@
 #define CONFIG_SYS_FSL_NUM_LAWS                10
 #define CONFIG_SYS_FSL_SEC_COMPAT      2
 #define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000
+#define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
 
 #elif defined(CONFIG_MPC8555)
 #define CONFIG_MAX_CPUS                        1