USB: EHCI: EHCI 1.1 addendum: Enable Per-port change detect bits
authorAlek Du <alek.du@intel.com>
Fri, 4 Jun 2010 07:47:56 +0000 (15:47 +0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 10 Aug 2010 21:35:35 +0000 (14:35 -0700)
This patch will enable Per-port event feature defined in EHCI 1.1
addendum. This feature addresses an issue where HCD is currently
required to read and parse PORTSC for all enabled root hub ports. With
this patch, the overhead will be reduced.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci-hub.c
drivers/usb/host/ehci.h

index baf9b64..8697ad1 100644 (file)
@@ -584,6 +584,11 @@ static int ehci_init(struct usb_hcd *hcd)
        if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
                log2_irq_thresh = 0;
        temp = 1 << (16 + log2_irq_thresh);
+       if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) {
+               ehci->has_ppcd = 1;
+               ehci_dbg(ehci, "enable per-port change event\n");
+               temp |= CMD_PPCEE;
+       }
        if (HCC_CANPARK(hcc_params)) {
                /* HW default park == 3, on hardware that supports it (like
                 * NVidia and ALI silicon), maximizes throughput on the async
@@ -782,6 +787,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
        /* remote wakeup [4.3.1] */
        if (status & STS_PCD) {
                unsigned        i = HCS_N_PORTS (ehci->hcs_params);
+               u32             ppcd = 0;
 
                /* kick root hub later */
                pcd_status = status;
@@ -790,9 +796,18 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
                if (!(cmd & CMD_RUN))
                        usb_hcd_resume_root_hub(hcd);
 
+               /* get per-port change detect bits */
+               if (ehci->has_ppcd)
+                       ppcd = status >> 16;
+
                while (i--) {
-                       int pstatus = ehci_readl(ehci,
-                                                &ehci->regs->port_status [i]);
+                       int pstatus;
+
+                       /* leverage per-port change bits feature */
+                       if (ehci->has_ppcd && !(ppcd & (1 << i)))
+                               continue;
+                       pstatus = ehci_readl(ehci,
+                                        &ehci->regs->port_status[i]);
 
                        if (pstatus & PORT_OWNER)
                                continue;
index 8a28dae..84e792d 100644 (file)
@@ -603,6 +603,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
        u32             mask;
        int             ports, i, retval = 1;
        unsigned long   flags;
+       u32             ppcd = 0;
 
        /* if !USB_SUSPEND, root hub timers won't get shut down ... */
        if (!HC_IS_RUNNING(hcd->state))
@@ -632,7 +633,15 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 
        /* port N changes (bit N)? */
        spin_lock_irqsave (&ehci->lock, flags);
+
+       /* get per-port change detect bits */
+       if (ehci->has_ppcd)
+               ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
+
        for (i = 0; i < ports; i++) {
+               /* leverage per-port change bits feature */
+               if (ehci->has_ppcd && !(ppcd & (1 << i)))
+                       continue;
                temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 
                /*
index 21f30a0..e6c57cc 100644 (file)
@@ -141,6 +141,7 @@ struct ehci_hcd {                   /* one per controller */
        __hc32                  *ohci_hcctrl_reg;
        unsigned                has_hostpc:1;
        unsigned                has_lpm:1;  /* support link power management */
+       unsigned                has_ppcd:1; /* support per-port change bits */
        u8                      sbrn;           /* packed release number */
 
        /* irq statistics */