description: |
Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
both I2C & SPI interfaces.
- http://www.analog.com/en/products/mems/accelerometers/adxl345.html
- http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+ https://www.analog.com/en/products/mems/accelerometers/adxl345.html
+ https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
properties:
compatible:
The internal DACs are loaded when the LOADDACS pin is pulled down.
-http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+https://www.ti.com/lit/ds/sbas106/sbas106.pdf
Required Properties:
- compatible: Should be one of:
output on a device. The length of an IIO specifier is defined by the
value of a #io-channel-cells property in the IIO provider node.
-[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
+[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
==IIO providers==
* Avago APDS9300 ambient light sensor
-http://www.avagotech.com/docs/AV02-1077EN
+https://www.avagotech.com/docs/AV02-1077EN
Required properties:
* Avago APDS9960 gesture/RGB/ALS/proximity sensor
-http://www.avagotech.com/docs/AV02-4191EN
+https://www.avagotech.com/docs/AV02-4191EN
Required properties:
requires the use of interrupts. Without interrupts, only the simple reading
of the current light value is supported through the IIO API.
-http://www.ti.com/product/opt3001
+https://www.ti.com/product/opt3001
Required properties:
- compatible: should be "ti,opt3001"
STMicro VL6180 - ALS, range and proximity sensor
-Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
+Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
Required properties:
* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
Datasheet publicly available at:
-http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
The node for this driver must be a child node of a SPI controller, hence
all mandatory properties described in
* Texas Instruments LMP91000 series of potentiostats
-LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
-LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
+LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
+LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
Required properties:
Bindings for the All Sensors DLH series pressure sensors.
Specifications about the sensors can be found at:
- http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+ https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
properties:
compatible:
until it is received once again
Specifications about the devices can be found at:
- http://www.robot-electronics.co.uk/htm/srf04tech.htm
+ https://www.robot-electronics.co.uk/htm/srf04tech.htm
- http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
+ https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
properties:
compatible: