add_subdirectory(disk)
add_subdirectory(printer)
add_subdirectory(parallel)
+add_subdirectory(serial)
--- /dev/null
+# FreeRDP: A Remote Desktop Protocol Client
+# FreeRDP cmake build script
+#
+# Copyright 2011 O.S. Systems Software Ltda.
+# Copyright 2011 Otavio Salvador <otavio@ossystems.com.br>
+# Copyright 2011 Marc-Andre Moreau <marcandre.moreau@gmail.com>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set(serial_SRCS
+ serial_tty.c
+ serial_tty.h
+ serial_constants.h
+ serial_main.c
+)
+
+include_directories(..)
+
+add_library(serial ${serial_SRCS})
+set_target_properties(serial PROPERTIES PREFIX "")
+
+target_link_libraries(serial freerdp-utils)
+
+install(TARGETS serial DESTINATION ${FREERDP_PLUGIN_PATH})
--- /dev/null
+/**
+ * FreeRDP: A Remote Desktop Protocol client.
+ * Serial Port Device Service Virtual Channel
+ *
+ * Copyright 2011 O.S. Systems Software Ltda.
+ * Copyright 2011 Eduardo Fiss Beloni <beloni@ossystems.com.br>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __SERIAL_CONSTANTS_H
+#define __SERIAL_CONSTANTS_H
+
+/* http://www.codeproject.com/KB/system/chaiyasit_t.aspx */
+#define SERIAL_TIMEOUT_MAX 4294967295u
+
+/* DR_CONTROL_REQ.IoControlCode */
+enum DR_PORT_CONTROL_REQ
+{
+ IOCTL_SERIAL_SET_BAUD_RATE = 0x001B0004,
+ IOCTL_SERIAL_GET_BAUD_RATE = 0x001B0050,
+ IOCTL_SERIAL_SET_LINE_CONTROL = 0x001B000C,
+ IOCTL_SERIAL_GET_LINE_CONTROL = 0x001B0054,
+ IOCTL_SERIAL_SET_TIMEOUTS = 0x001B001C,
+ IOCTL_SERIAL_GET_TIMEOUTS = 0x001B0020,
+
+/* GET_CHARS and SET_CHARS are swapped in the RDP docs [MS-RDPESP] */
+ IOCTL_SERIAL_GET_CHARS = 0x001B0058,
+ IOCTL_SERIAL_SET_CHARS = 0x001B005C,
+
+ IOCTL_SERIAL_SET_DTR = 0x001B0024,
+ IOCTL_SERIAL_CLR_DTR = 0x001B0028,
+ IOCTL_SERIAL_RESET_DEVICE = 0x001B002C,
+ IOCTL_SERIAL_SET_RTS = 0x001B0030,
+ IOCTL_SERIAL_CLR_RTS = 0x001B0034,
+ IOCTL_SERIAL_SET_XOFF = 0x001B0038,
+ IOCTL_SERIAL_SET_XON = 0x001B003C,
+ IOCTL_SERIAL_SET_BREAK_ON = 0x001B0010,
+ IOCTL_SERIAL_SET_BREAK_OFF = 0x001B0014,
+ IOCTL_SERIAL_SET_QUEUE_SIZE = 0x001B0008,
+ IOCTL_SERIAL_GET_WAIT_MASK = 0x001B0040,
+ IOCTL_SERIAL_SET_WAIT_MASK = 0x001B0044,
+ IOCTL_SERIAL_WAIT_ON_MASK = 0x001B0048,
+ IOCTL_SERIAL_IMMEDIATE_CHAR = 0x001B0018,
+ IOCTL_SERIAL_PURGE = 0x001B004C,
+ IOCTL_SERIAL_GET_HANDFLOW = 0x001B0060,
+ IOCTL_SERIAL_SET_HANDFLOW = 0x001B0064,
+ IOCTL_SERIAL_GET_MODEMSTATUS = 0x001B0068,
+ IOCTL_SERIAL_GET_DTRRTS = 0x001B0078,
+
+/* according to [MS-RDPESP] it should be 0x001B0084, but servers send 0x001B006C */
+ IOCTL_SERIAL_GET_COMMSTATUS = 0x001B006C,
+
+ IOCTL_SERIAL_GET_PROPERTIES = 0x001B0074,
+ IOCTL_SERIAL_XOFF_COUNTER = 0x001B0070,
+ IOCTL_SERIAL_LSRMST_INSERT = 0x001B007C,
+ IOCTL_SERIAL_CONFIG_SIZE = 0x001B0080,
+ IOCTL_SERIAL_GET_STATS = 0x001B008C,
+ IOCTL_SERIAL_CLEAR_STATS = 0x001B0090,
+ IOCTL_SERIAL_GET_MODEM_CONTROL = 0x001B0094,
+ IOCTL_SERIAL_SET_MODEM_CONTROL = 0x001B0098,
+ IOCTL_SERIAL_SET_FIFO_CONTROL = 0x001B009C,
+};
+
+enum SERIAL_PURGE_MASK
+{
+ SERIAL_PURGE_TXABORT = 0x00000001,
+ SERIAL_PURGE_RXABORT = 0x00000002,
+ SERIAL_PURGE_TXCLEAR = 0x00000004,
+ SERIAL_PURGE_RXCLEAR = 0x00000008,
+};
+
+enum SERIAL_WAIT_MASK
+{
+ SERIAL_EV_RXCHAR = 0x0001, /* Any Character received */
+ SERIAL_EV_RXFLAG = 0x0002, /* Received certain character */
+ SERIAL_EV_TXEMPTY = 0x0004, /* Transmitt Queue Empty */
+ SERIAL_EV_CTS = 0x0008, /* CTS changed state */
+ SERIAL_EV_DSR = 0x0010, /* DSR changed state */
+ SERIAL_EV_RLSD = 0x0020, /* RLSD changed state */
+ SERIAL_EV_BREAK = 0x0040, /* BREAK received */
+ SERIAL_EV_ERR = 0x0080, /* Line status error occurred */
+ SERIAL_EV_RING = 0x0100, /* Ring signal detected */
+ SERIAL_EV_PERR = 0x0200, /* Printer error occured */
+ SERIAL_EV_RX80FULL = 0x0400,/* Receive buffer is 80 percent full */
+ SERIAL_EV_EVENT1 = 0x0800, /* Provider specific event 1 */
+ SERIAL_EV_EVENT2 = 0x1000, /* Provider specific event 2 */
+};
+
+enum SERIAL_MODEM_STATUS
+{
+ SERIAL_MS_DTR = 0x01,
+ SERIAL_MS_RTS = 0x02,
+ SERIAL_MS_CTS = 0x10,
+ SERIAL_MS_DSR = 0x20,
+ SERIAL_MS_RNG = 0x40,
+ SERIAL_MS_CAR = 0x80,
+};
+
+enum SERIAL_HANDFLOW
+{
+ SERIAL_DTR_CONTROL = 0x01,
+ SERIAL_CTS_HANDSHAKE = 0x08,
+ SERIAL_ERROR_ABORT = 0x80000000,
+};
+
+enum SERIAL_FLOW_CONTROL
+{
+ SERIAL_XON_HANDSHAKE = 0x01,
+ SERIAL_XOFF_HANDSHAKE = 0x02,
+ SERIAL_DSR_SENSITIVITY = 0x40,
+};
+
+enum SERIAL_CHARS
+{
+ SERIAL_CHAR_EOF = 0,
+ SERIAL_CHAR_ERROR = 1,
+ SERIAL_CHAR_BREAK = 2,
+ SERIAL_CHAR_EVENT = 3,
+ SERIAL_CHAR_XON = 4,
+ SERIAL_CHAR_XOFF = 5,
+};
+
+enum SERIAL_ABORT_IO
+{
+ SERIAL_ABORT_IO_NONE = 0,
+ SERIAL_ABORT_IO_WRITE = 1,
+ SERIAL_ABORT_IO_READ = 2,
+};
+
+enum SERIAL_STOP_BITS
+{
+ SERIAL_STOP_BITS_1 = 0,
+ SERIAL_STOP_BITS_2 = 2,
+};
+
+enum SERIAL_PARITY
+{
+ SERIAL_NO_PARITY = 0,
+ SERIAL_ODD_PARITY = 1,
+ SERIAL_EVEN_PARITY = 2,
+};
+
+#endif
--- /dev/null
+/**
+ * FreeRDP: A Remote Desktop Protocol client.
+ * Serial Port Device Service Virtual Channel
+ *
+ * Copyright 2011 O.S. Systems Software Ltda.
+ * Copyright 2011 Eduardo Fiss Beloni <beloni@ossystems.com.br>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+
+#include "config.h"
+
+#ifdef HAVE_SYS_MODEM_H
+#include <sys/modem.h>
+#endif
+#ifdef HAVE_SYS_FILIO_H
+#include <sys/filio.h>
+#endif
+#ifdef HAVE_SYS_STRTIO_H
+#include <sys/strtio.h>
+#endif
+
+#include "rdpdr_types.h"
+#include "rdpdr_constants.h"
+#include "devman.h"
+#include "serial_tty.h"
+#include "serial_constants.h"
+
+#include <freerdp/utils/stream.h>
+#include <freerdp/utils/thread.h>
+#include <freerdp/utils/unicode.h>
+#include <freerdp/utils/wait_obj.h>
+
+typedef struct _SERIAL_DEVICE SERIAL_DEVICE;
+struct _SERIAL_DEVICE
+{
+ DEVICE device;
+
+ char* path;
+ SERIAL_TTY* tty;
+
+ LIST* irp_list;
+ LIST* pending_irps;
+ freerdp_thread* thread;
+ struct wait_obj* in_event;
+
+ fd_set read_fds;
+ fd_set write_fds;
+ uint32 nfds;
+ struct timeval tv;
+ uint32 select_timeout;
+ uint32 timeout_id;
+};
+
+static void serial_abort_single_io(SERIAL_DEVICE* serial, uint32 file_id, uint32 abort_io, uint32 io_status);
+static void serial_check_for_events(SERIAL_DEVICE* serial);
+static void serial_handle_async_irp(SERIAL_DEVICE* serial, IRP* irp);
+static boolean serial_check_fds(SERIAL_DEVICE* serial);
+
+static void serial_process_irp_create(SERIAL_DEVICE* serial, IRP* irp)
+{
+ SERIAL_TTY* tty;
+ uint32 PathLength;
+ uint32 FileId;
+ char* path;
+ UNICONV* uniconv;
+
+ stream_seek(irp->input, 28); /* DesiredAccess(4) AllocationSize(8), FileAttributes(4) */
+ /* SharedAccess(4) CreateDisposition(4), CreateOptions(4) */
+ stream_read_uint32(irp->input, PathLength);
+
+ uniconv = freerdp_uniconv_new();
+ path = freerdp_uniconv_in(uniconv, stream_get_tail(irp->input), PathLength);
+ freerdp_uniconv_free(uniconv);
+
+ FileId = irp->devman->id_sequence++;
+
+ tty = serial_tty_new(serial->path, FileId);
+ if (tty == NULL)
+ {
+ irp->IoStatus = STATUS_UNSUCCESSFUL;
+ FileId = 0;
+
+ DEBUG_WARN("failed to create %s", path);
+ }
+ else
+ {
+ serial->tty = tty;
+ DEBUG_SVC("%s(%d) created.", serial->path, FileId);
+ }
+
+ stream_write_uint32(irp->output, FileId);
+ stream_write_uint8(irp->output, 0);
+
+ xfree(path);
+
+ irp->Complete(irp);
+}
+
+static void serial_process_irp_close(SERIAL_DEVICE* serial, IRP* irp)
+{
+ SERIAL_TTY* tty;
+
+ tty = serial->tty;
+ if (tty == NULL)
+ {
+ irp->IoStatus = STATUS_UNSUCCESSFUL;
+ DEBUG_WARN("tty not valid.");
+ }
+ else
+ {
+ DEBUG_SVC("%s(%d) closed.", serial->path, tty->id);
+
+ serial_tty_free(tty);
+ serial->tty = NULL;
+ }
+
+ stream_write_zero(irp->output, 5); /* Padding(5) */
+
+ irp->Complete(irp);
+}
+
+static void serial_process_irp_read(SERIAL_DEVICE* serial, IRP* irp)
+{
+ SERIAL_TTY* tty;
+ uint32 Length;
+ uint64 Offset;
+ uint8* buffer = NULL;
+
+ stream_read_uint32(irp->input, Length);
+ stream_read_uint64(irp->input, Offset);
+
+ DEBUG_SVC("length %u offset %llu", Length, Offset);
+
+ tty = serial->tty;
+ if (tty == NULL)
+ {
+ irp->IoStatus = STATUS_UNSUCCESSFUL;
+ Length = 0;
+
+ DEBUG_WARN("tty not valid.");
+ }
+ else
+ {
+ buffer = (uint8*)xmalloc(Length);
+ if (!serial_tty_read(tty, buffer, &Length))
+ {
+ irp->IoStatus = STATUS_UNSUCCESSFUL;
+ xfree(buffer);
+ buffer = NULL;
+ Length = 0;
+
+ DEBUG_WARN("read %s(%d) failed.", serial->path, tty->id);
+ }
+ else
+ {
+ DEBUG_SVC("read %llu-%llu from %d", Offset, Offset + Length, tty->id);
+ }
+ }
+
+ stream_write_uint32(irp->output, Length);
+ if (Length > 0)
+ {
+ stream_check_size(irp->output, Length);
+ stream_write(irp->output, buffer, Length);
+ }
+ xfree(buffer);
+
+ irp->Complete(irp);
+}
+
+static void serial_process_irp_write(SERIAL_DEVICE* serial, IRP* irp)
+{
+ SERIAL_TTY* tty;
+ uint32 Length;
+ uint64 Offset;
+
+ stream_read_uint32(irp->input, Length);
+ stream_read_uint64(irp->input, Offset);
+ stream_seek(irp->input, 20); /* Padding */
+
+ DEBUG_SVC("length %u offset %llu", Length, Offset);
+
+ tty = serial->tty;
+ if (tty == NULL)
+ {
+ irp->IoStatus = STATUS_UNSUCCESSFUL;
+ Length = 0;
+
+ DEBUG_WARN("tty not valid.");
+ }
+ else if (!serial_tty_write(tty, stream_get_tail(irp->input), Length))
+ {
+ irp->IoStatus = STATUS_UNSUCCESSFUL;
+ Length = 0;
+
+ DEBUG_WARN("write %s(%d) failed.", serial->path, tty->id);
+ }
+ else
+ {
+ DEBUG_SVC("write %llu-%llu to %s(%d).", Offset, Offset + Length, serial->path, tty->id);
+ }
+
+ stream_write_uint32(irp->output, Length);
+ stream_write_uint8(irp->output, 0); /* Padding */
+
+ irp->Complete(irp);
+}
+
+static void serial_process_irp_device_control(SERIAL_DEVICE* serial, IRP* irp)
+{
+ SERIAL_TTY* tty;
+ uint32 IoControlCode;
+ uint32 InputBufferLength;
+ uint32 OutputBufferLength;
+ uint32 abort_io = SERIAL_ABORT_IO_NONE;
+
+ DEBUG_SVC("[in] pending size %d", list_size(serial->pending_irps));
+
+ stream_read_uint32(irp->input, InputBufferLength);
+ stream_read_uint32(irp->input, OutputBufferLength);
+ stream_read_uint32(irp->input, IoControlCode);
+ stream_seek(irp->input, 20); /* Padding */
+
+ tty = serial->tty;
+ if (tty == NULL)
+ {
+ irp->IoStatus = STATUS_UNSUCCESSFUL;
+ OutputBufferLength = 0;
+
+ DEBUG_WARN("tty not valid.");
+ }
+ else
+ {
+ irp->IoStatus = serial_tty_control(tty, IoControlCode, irp->input, irp->output, &abort_io);
+ }
+
+ if (abort_io & SERIAL_ABORT_IO_WRITE)
+ serial_abort_single_io(serial, tty->id, SERIAL_ABORT_IO_WRITE, STATUS_CANCELLED);
+ if (abort_io & SERIAL_ABORT_IO_READ)
+ serial_abort_single_io(serial, tty->id, SERIAL_ABORT_IO_READ, STATUS_CANCELLED);
+
+ if (irp->IoStatus == STATUS_PENDING)
+ list_enqueue(serial->pending_irps, irp);
+ else
+ irp->Complete(irp);
+}
+
+static void serial_process_irp(SERIAL_DEVICE* serial, IRP* irp)
+{
+ DEBUG_SVC("MajorFunction %u", irp->MajorFunction);
+
+ switch (irp->MajorFunction)
+ {
+ case IRP_MJ_CREATE:
+ serial_process_irp_create(serial, irp);
+ break;
+
+ case IRP_MJ_CLOSE:
+ serial_process_irp_close(serial, irp);
+ break;
+
+ case IRP_MJ_READ:
+ serial_handle_async_irp(serial, irp);
+ //serial_process_irp_read(serial, irp);
+ break;
+
+ case IRP_MJ_WRITE:
+ serial_handle_async_irp(serial, irp);
+ //serial_process_irp_write(serial, irp);
+ break;
+
+ case IRP_MJ_DEVICE_CONTROL:
+ serial_process_irp_device_control(serial, irp);
+ break;
+
+ default:
+ DEBUG_WARN("MajorFunction 0x%X not supported", irp->MajorFunction);
+ irp->IoStatus = STATUS_NOT_SUPPORTED;
+ irp->Complete(irp);
+ break;
+ }
+
+ serial_check_for_events(serial);
+}
+
+static void serial_process_irp_list(SERIAL_DEVICE* serial)
+{
+ IRP* irp;
+
+ while (1)
+ {
+ if (freerdp_thread_is_stopped(serial->thread))
+ break;
+
+ freerdp_thread_lock(serial->thread);
+ irp = (IRP*)list_dequeue(serial->irp_list);
+ freerdp_thread_unlock(serial->thread);
+
+ if (irp == NULL)
+ break;
+
+ serial_process_irp(serial, irp);
+ }
+}
+
+static void* serial_thread_func(void* arg)
+{
+ SERIAL_DEVICE* serial = (SERIAL_DEVICE*)arg;
+
+ while (1)
+ {
+ freerdp_thread_wait(serial->thread);
+
+ serial->nfds = 1;
+ FD_ZERO(&serial->read_fds);
+ FD_ZERO(&serial->write_fds);
+
+ serial->tv.tv_sec = 20;
+ serial->tv.tv_usec = 0;
+ serial->select_timeout = 0;
+
+ if (freerdp_thread_is_stopped(serial->thread))
+ break;
+
+ freerdp_thread_reset(serial->thread);
+ serial_process_irp_list(serial);
+
+ if (wait_obj_is_set(serial->in_event))
+ {
+ if (serial_check_fds(serial))
+ wait_obj_clear(serial->in_event);
+ }
+ }
+
+ freerdp_thread_quit(serial->thread);
+
+ return NULL;
+}
+
+static void serial_irp_request(DEVICE* device, IRP* irp)
+{
+ SERIAL_DEVICE* serial = (SERIAL_DEVICE*)device;
+
+ freerdp_thread_lock(serial->thread);
+ list_enqueue(serial->irp_list, irp);
+ freerdp_thread_unlock(serial->thread);
+
+ freerdp_thread_signal(serial->thread);
+}
+
+static void serial_free(DEVICE* device)
+{
+ SERIAL_DEVICE* serial = (SERIAL_DEVICE*)device;
+ IRP* irp;
+
+ DEBUG_SVC("freeing device");
+
+ freerdp_thread_stop(serial->thread);
+ freerdp_thread_free(serial->thread);
+
+ while ((irp = (IRP*)list_dequeue(serial->irp_list)) != NULL)
+ irp->Discard(irp);
+ list_free(serial->irp_list);
+
+ while ((irp = (IRP*)list_dequeue(serial->pending_irps)) != NULL)
+ irp->Discard(irp);
+ list_free(serial->pending_irps);
+
+ xfree(serial);
+}
+
+int DeviceServiceEntry(PDEVICE_SERVICE_ENTRY_POINTS pEntryPoints)
+{
+ SERIAL_DEVICE* serial;
+ char* name;
+ char* path;
+ int i, len;
+
+ name = (char*)pEntryPoints->plugin_data->data[1];
+ path = (char*)pEntryPoints->plugin_data->data[2];
+
+ if (name[0] && path[0])
+ {
+ serial = xnew(SERIAL_DEVICE);
+
+ serial->device.type = RDPDR_DTYP_SERIAL;
+ serial->device.name = name;
+ serial->device.IRPRequest = serial_irp_request;
+ serial->device.Free = serial_free;
+
+ len = strlen(name);
+ serial->device.data = stream_new(len + 1);
+ for (i = 0; i <= len; i++)
+ stream_write_uint8(serial->device.data, name[i] < 0 ? '_' : name[i]);
+
+ serial->path = path;
+ serial->irp_list = list_new();
+ serial->pending_irps = list_new();
+ serial->thread = freerdp_thread_new();
+ serial->in_event = wait_obj_new();
+
+ pEntryPoints->RegisterDevice(pEntryPoints->devman, (DEVICE*)serial);
+
+ freerdp_thread_start(serial->thread, serial_thread_func, serial);
+ }
+
+ return 0;
+}
+
+static void serial_abort_single_io(SERIAL_DEVICE* serial, uint32 file_id, uint32 abort_io, uint32 io_status)
+{
+ IRP* irp = NULL;
+ uint32 major;
+ SERIAL_TTY* tty;
+
+ DEBUG_SVC("[in] pending size %d", list_size(serial->pending_irps));
+
+ tty = serial->tty;
+
+ switch (abort_io)
+ {
+ case SERIAL_ABORT_IO_NONE:
+ major = 0;
+ break;
+
+ case SERIAL_ABORT_IO_READ:
+ major = IRP_MJ_READ;
+ break;
+
+ case SERIAL_ABORT_IO_WRITE:
+ major = IRP_MJ_WRITE;
+ break;
+
+ default:
+ DEBUG_SVC("unexpected abort_io code %d", abort_io);
+ return;
+ }
+
+ irp = (IRP*)list_peek(serial->pending_irps);
+ while (irp)
+ {
+ if (irp->FileId != file_id || irp->MajorFunction != major)
+ {
+ irp = (IRP*)list_next(serial->pending_irps, irp);
+ continue;
+ }
+
+ /* Process a SINGLE FileId and MajorFunction */
+ list_remove(serial->pending_irps, irp);
+ irp->IoStatus = io_status;
+ irp->Complete(irp);
+
+ wait_obj_set(serial->in_event);
+ break;
+ }
+
+ DEBUG_SVC("[out] pending size %d", list_size(serial->pending_irps));
+}
+
+static void serial_check_for_events(SERIAL_DEVICE* serial)
+{
+ IRP* irp = NULL;
+ IRP* prev;
+ uint32 result = 0;
+ SERIAL_TTY* tty;
+
+ tty = serial->tty;
+
+ DEBUG_SVC("[in] pending size %d", list_size(serial->pending_irps));
+
+ irp = (IRP*)list_peek(serial->pending_irps);
+ while (irp)
+ {
+ prev = NULL;
+
+ if (irp->MajorFunction == IRP_MJ_DEVICE_CONTROL)
+ {
+ if (serial_tty_get_event(tty, &result))
+ {
+ DEBUG_SVC("got event result %u", result);
+
+ irp->IoStatus = STATUS_SUCCESS;
+ stream_write_uint32(irp->output, result);
+ irp->Complete(irp);
+
+ prev = irp;
+ irp = (IRP*)list_next(serial->pending_irps, irp);
+ list_remove(serial->pending_irps, prev);
+
+ wait_obj_set(serial->in_event);
+ }
+ }
+
+ if (!prev)
+ irp = (IRP*)list_next(serial->pending_irps, irp);
+ }
+
+ DEBUG_SVC("[out] pending size %d", list_size(serial->pending_irps));
+}
+
+void serial_get_timeouts(SERIAL_DEVICE* serial, IRP* irp, uint32* timeout, uint32* interval_timeout)
+{
+ SERIAL_TTY* tty;
+ uint32 Length;
+ uint32 pos;
+
+ pos = stream_get_pos(irp->input);
+ stream_read_uint32(irp->input, Length);
+ stream_set_pos(irp->input, pos);
+
+ DEBUG_SVC("length read %u", Length);
+
+ tty = serial->tty;
+ *timeout = (tty->read_total_timeout_multiplier * Length) +
+ tty->read_total_timeout_constant;
+ *interval_timeout = tty->read_interval_timeout;
+
+ DEBUG_SVC("timeouts %u %u", *timeout, *interval_timeout);
+}
+
+static void serial_handle_async_irp(SERIAL_DEVICE* serial, IRP* irp)
+{
+ uint32 timeout = 0;
+ uint32 itv_timeout = 0;
+ SERIAL_TTY* tty;
+
+ tty = serial->tty;
+
+ switch (irp->MajorFunction)
+ {
+ case IRP_MJ_WRITE:
+ DEBUG_SVC("handling IRP_MJ_WRITE");
+ break;
+
+ case IRP_MJ_READ:
+ DEBUG_SVC("handling IRP_MJ_READ");
+
+ serial_get_timeouts(serial, irp, &timeout, &itv_timeout);
+
+ /* Check if io request timeout is smaller than current (but not 0). */
+ if (timeout && (serial->select_timeout == 0 || timeout < serial->select_timeout))
+ {
+ serial->select_timeout = timeout;
+ serial->tv.tv_sec = serial->select_timeout / 1000;
+ serial->tv.tv_usec = (serial->select_timeout % 1000) * 1000;
+ serial->timeout_id = tty->id;
+ }
+ if (itv_timeout && (serial->select_timeout == 0 || itv_timeout < serial->select_timeout))
+ {
+ serial->select_timeout = itv_timeout;
+ serial->tv.tv_sec = serial->select_timeout / 1000;
+ serial->tv.tv_usec = (serial->select_timeout % 1000) * 1000;
+ serial->timeout_id = tty->id;
+ }
+ DEBUG_SVC("select_timeout %u, tv_sec %lu tv_usec %lu, timeout_id %u",
+ serial->select_timeout, serial->tv.tv_sec, serial->tv.tv_usec, serial->timeout_id);
+ break;
+
+ default:
+ DEBUG_SVC("no need to handle %d", irp->MajorFunction);
+ return;
+ }
+
+ irp->IoStatus = STATUS_PENDING;
+ list_enqueue(serial->pending_irps, irp);
+ wait_obj_set(serial->in_event);
+}
+
+static void __serial_check_fds(SERIAL_DEVICE* serial)
+{
+ IRP* irp;
+ IRP* prev;
+ SERIAL_TTY* tty;
+ uint32 result = 0;
+
+ memset(&serial->tv, 0, sizeof(struct timeval));
+ tty = serial->tty;
+
+ /* scan every pending */
+ irp = list_peek(serial->pending_irps);
+ while (irp)
+ {
+ DEBUG_SVC("MajorFunction %u", irp->MajorFunction);
+
+ switch (irp->MajorFunction)
+ {
+ case IRP_MJ_READ:
+ if (FD_ISSET(tty->fd, &serial->read_fds))
+ {
+ irp->IoStatus = STATUS_SUCCESS;
+ serial_process_irp_read(serial, irp);
+ }
+ break;
+
+ case IRP_MJ_WRITE:
+ if (FD_ISSET(tty->fd, &serial->write_fds))
+ {
+ irp->IoStatus = STATUS_SUCCESS;
+ serial_process_irp_write(serial, irp);
+ }
+ break;
+
+ case IRP_MJ_DEVICE_CONTROL:
+ if (serial_tty_get_event(tty, &result))
+ {
+ DEBUG_SVC("got event result %u", result);
+
+ irp->IoStatus = STATUS_SUCCESS;
+ stream_write_uint32(irp->output, result);
+ irp->Complete(irp);
+ }
+ break;
+
+ default:
+ DEBUG_SVC("no request found");
+ break;
+ }
+
+ prev = irp;
+ irp = (IRP*)list_next(serial->pending_irps, irp);
+ if (prev->IoStatus == STATUS_SUCCESS)
+ {
+ list_remove(serial->pending_irps, prev);
+ wait_obj_set(serial->in_event);
+ }
+ }
+}
+
+static void serial_set_fds(SERIAL_DEVICE* serial)
+{
+ fd_set* fds;
+ IRP* irp;
+ SERIAL_TTY* tty;
+
+ DEBUG_SVC("[in] pending size %d", list_size(serial->pending_irps));
+
+ tty = serial->tty;
+ irp = (IRP*)list_peek(serial->pending_irps);
+ while (irp)
+ {
+ fds = NULL;
+
+ switch (irp->MajorFunction)
+ {
+ case IRP_MJ_WRITE:
+ fds = &serial->write_fds;
+ break;
+
+ case IRP_MJ_READ:
+ fds = &serial->read_fds;
+ break;
+ }
+
+ if (fds && (tty->fd >= 0))
+ {
+ FD_SET(tty->fd, fds);
+ serial->nfds = MAX(serial->nfds, tty->fd);
+ }
+ irp = (IRP*)list_next(serial->pending_irps, irp);
+ }
+}
+
+static boolean serial_check_fds(SERIAL_DEVICE* serial)
+{
+ if (list_size(serial->pending_irps) == 0)
+ return 1;
+
+ serial_set_fds(serial);
+ DEBUG_SVC("waiting %lu %lu", serial->tv.tv_sec, serial->tv.tv_usec);
+
+ switch (select(serial->nfds + 1, &serial->read_fds, &serial->write_fds, NULL, &serial->tv))
+ {
+ case -1:
+ DEBUG_SVC("select has returned -1 with error: %s", strerror(errno));
+ return 0;
+
+ case 0:
+ if (serial->select_timeout)
+ {
+ serial_abort_single_io(serial, serial->timeout_id, SERIAL_ABORT_IO_NONE, STATUS_TIMEOUT);
+ serial_abort_single_io(serial, serial->timeout_id, SERIAL_ABORT_IO_READ, STATUS_TIMEOUT);
+ serial_abort_single_io(serial, serial->timeout_id, SERIAL_ABORT_IO_WRITE, STATUS_TIMEOUT);
+ }
+ DEBUG_SVC("select has timed out");
+ return 0;
+
+ default:
+ break;
+ }
+
+ __serial_check_fds(serial);
+
+ return 1;
+}
--- /dev/null
+/**
+ * FreeRDP: A Remote Desktop Protocol client.
+ * Serial Port Device Service Virtual Channel
+ *
+ * Copyright 2011 O.S. Systems Software Ltda.
+ * Copyright 2011 Eduardo Fiss Beloni <beloni@ossystems.com.br>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "config.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <freerdp/utils/memory.h>
+#include <freerdp/utils/stream.h>
+#include <freerdp/utils/unicode.h>
+#include <freerdp/utils/list.h>
+#include <freerdp/utils/thread.h>
+#include <freerdp/utils/svc_plugin.h>
+#include <freerdp/utils/hexdump.h>
+
+#include <unistd.h>
+#include <termios.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <dirent.h>
+#include <sys/ioctl.h>
+#include <errno.h>
+
+#include "rdpdr_constants.h"
+#include "rdpdr_types.h"
+#include "serial_tty.h"
+#include "serial_constants.h"
+
+#ifdef HAVE_SYS_MODEM_H
+#include <sys/modem.h>
+#endif
+#ifdef HAVE_SYS_FILIO_H
+#include <sys/filio.h>
+#endif
+#ifdef HAVE_SYS_STRTIO_H
+#include <sys/strtio.h>
+#endif
+
+#ifndef CRTSCTS
+#define CRTSCTS 0
+#endif
+
+/* FIONREAD should really do the same thing as TIOCINQ, where it is
+ * not available */
+#if !defined(TIOCINQ) && defined(FIONREAD)
+#define TIOCINQ FIONREAD
+#endif
+#if !defined(TIOCOUTQ) && defined(FIONWRITE)
+#define TIOCOUTQ FIONWRITE
+#endif
+
+
+static uint32 tty_write_data(SERIAL_TTY* tty, uint8* data, int len);
+static void tty_set_termios(SERIAL_TTY* tty);
+static boolean tty_get_termios(SERIAL_TTY* tty);
+static int tty_get_error_status();
+
+uint32 serial_tty_control(SERIAL_TTY* tty, uint32 IoControlCode, STREAM* input, STREAM* output, uint32* abort_io)
+{
+ int purge_mask;
+ uint32 result;
+ uint32 modemstate;
+ uint8 immediate;
+ uint32 ret = STATUS_SUCCESS;
+ uint32 length = 0;
+ uint32 pos;
+
+ DEBUG_SVC("in");
+
+ stream_seek(output, sizeof(uint32));
+
+ switch (IoControlCode)
+ {
+ case IOCTL_SERIAL_SET_BAUD_RATE:
+ stream_read_uint32(input, tty->baud_rate);
+ tty_set_termios(tty);
+ DEBUG_SVC("SERIAL_SET_BAUD_RATE %d", tty->baud_rate);
+ break;
+
+ case IOCTL_SERIAL_GET_BAUD_RATE:
+ length = 4;
+ stream_write_uint32(output, tty->baud_rate);
+ DEBUG_SVC("SERIAL_GET_BAUD_RATE %d", tty->baud_rate);
+ break;
+
+ case IOCTL_SERIAL_SET_QUEUE_SIZE:
+ stream_read_uint32(input, tty->queue_in_size);
+ stream_read_uint32(input, tty->queue_out_size);
+ DEBUG_SVC("SERIAL_SET_QUEUE_SIZE in %d out %d", tty->queue_in_size, tty->queue_out_size);
+ break;
+
+ case IOCTL_SERIAL_SET_LINE_CONTROL:
+ stream_read_uint8(input, tty->stop_bits);
+ stream_read_uint8(input, tty->parity);
+ stream_read_uint8(input, tty->word_length);
+ tty_set_termios(tty);
+ DEBUG_SVC("SERIAL_SET_LINE_CONTROL stop %d parity %d word %d",
+ tty->stop_bits, tty->parity, tty->word_length);
+ break;
+
+ case IOCTL_SERIAL_GET_LINE_CONTROL:
+ DEBUG_SVC("SERIAL_GET_LINE_CONTROL");
+ length = 3;
+ stream_write_uint8(output, tty->stop_bits);
+ stream_write_uint8(output, tty->parity);
+ stream_write_uint8(output, tty->word_length);
+ break;
+
+ case IOCTL_SERIAL_IMMEDIATE_CHAR:
+ DEBUG_SVC("SERIAL_IMMEDIATE_CHAR");
+ stream_read_uint8(input, immediate);
+ tty_write_data(tty, &immediate, 1);
+ break;
+
+ case IOCTL_SERIAL_CONFIG_SIZE:
+ DEBUG_SVC("SERIAL_CONFIG_SIZE");
+ length = 4;
+ stream_write_uint32(output, 0);
+ break;
+
+ case IOCTL_SERIAL_GET_CHARS:
+ DEBUG_SVC("SERIAL_GET_CHARS");
+ length = 6;
+ stream_write(output, tty->chars, 6);
+ break;
+
+ case IOCTL_SERIAL_SET_CHARS:
+ DEBUG_SVC("SERIAL_SET_CHARS");
+ stream_read(input, tty->chars, 6);
+ tty_set_termios(tty);
+ break;
+
+ case IOCTL_SERIAL_GET_HANDFLOW:
+ length = 16;
+ tty_get_termios(tty);
+ stream_write_uint32(output, tty->control);
+ stream_write_uint32(output, tty->xonoff);
+ stream_write_uint32(output, tty->onlimit);
+ stream_write_uint32(output, tty->offlimit);
+ DEBUG_SVC("IOCTL_SERIAL_GET_HANDFLOW %X %X %X %X",
+ tty->control, tty->xonoff, tty->onlimit, tty->offlimit);
+ break;
+
+ case IOCTL_SERIAL_SET_HANDFLOW:
+ stream_read_uint32(input, tty->control);
+ stream_read_uint32(input, tty->xonoff);
+ stream_read_uint32(input, tty->onlimit);
+ stream_read_uint32(input, tty->offlimit);
+ DEBUG_SVC("IOCTL_SERIAL_SET_HANDFLOW %X %X %X %X",
+ tty->control, tty->xonoff, tty->onlimit, tty->offlimit);
+ tty_set_termios(tty);
+ break;
+
+ case IOCTL_SERIAL_SET_TIMEOUTS:
+ stream_read_uint32(input, tty->read_interval_timeout);
+ stream_read_uint32(input, tty->read_total_timeout_multiplier);
+ stream_read_uint32(input, tty->read_total_timeout_constant);
+ stream_read_uint32(input, tty->write_total_timeout_multiplier);
+ stream_read_uint32(input, tty->write_total_timeout_constant);
+
+ /* http://www.codeproject.com/KB/system/chaiyasit_t.aspx, see 'ReadIntervalTimeout' section
+ http://msdn.microsoft.com/en-us/library/ms885171.aspx */
+ if (tty->read_interval_timeout == SERIAL_TIMEOUT_MAX)
+ {
+ tty->read_interval_timeout = 0;
+ tty->read_total_timeout_multiplier = 0;
+ }
+
+ DEBUG_SVC("SERIAL_SET_TIMEOUTS read timeout %d %d %d",
+ tty->read_interval_timeout,
+ tty->read_total_timeout_multiplier,
+ tty->read_total_timeout_constant);
+ break;
+
+ case IOCTL_SERIAL_GET_TIMEOUTS:
+ DEBUG_SVC("SERIAL_GET_TIMEOUTS read timeout %d %d %d",
+ tty->read_interval_timeout,
+ tty->read_total_timeout_multiplier,
+ tty->read_total_timeout_constant);
+ length = 20;
+ stream_write_uint32(output, tty->read_interval_timeout);
+ stream_write_uint32(output, tty->read_total_timeout_multiplier);
+ stream_write_uint32(output, tty->read_total_timeout_constant);
+ stream_write_uint32(output, tty->write_total_timeout_multiplier);
+ stream_write_uint32(output, tty->write_total_timeout_constant);
+ break;
+
+ case IOCTL_SERIAL_GET_WAIT_MASK:
+ DEBUG_SVC("SERIAL_GET_WAIT_MASK %X", tty->wait_mask);
+ length = 4;
+ stream_write_uint32(output, tty->wait_mask);
+ break;
+
+ case IOCTL_SERIAL_SET_WAIT_MASK:
+ stream_read_uint32(input, tty->wait_mask);
+ DEBUG_SVC("SERIAL_SET_WAIT_MASK %X", tty->wait_mask);
+ break;
+
+ case IOCTL_SERIAL_SET_DTR:
+ DEBUG_SVC("SERIAL_SET_DTR");
+ ioctl(tty->fd, TIOCMGET, &result);
+ result |= TIOCM_DTR;
+ ioctl(tty->fd, TIOCMSET, &result);
+ tty->dtr = 1;
+ break;
+
+ case IOCTL_SERIAL_CLR_DTR:
+ DEBUG_SVC("SERIAL_CLR_DTR");
+ ioctl(tty->fd, TIOCMGET, &result);
+ result &= ~TIOCM_DTR;
+ ioctl(tty->fd, TIOCMSET, &result);
+ tty->dtr = 0;
+ break;
+
+ case IOCTL_SERIAL_SET_RTS:
+ DEBUG_SVC("SERIAL_SET_RTS");
+ ioctl(tty->fd, TIOCMGET, &result);
+ result |= TIOCM_RTS;
+ ioctl(tty->fd, TIOCMSET, &result);
+ tty->rts = 1;
+ break;
+
+ case IOCTL_SERIAL_CLR_RTS:
+ DEBUG_SVC("SERIAL_CLR_RTS");
+ ioctl(tty->fd, TIOCMGET, &result);
+ result &= ~TIOCM_RTS;
+ ioctl(tty->fd, TIOCMSET, &result);
+ tty->rts = 0;
+ break;
+
+ case IOCTL_SERIAL_GET_MODEMSTATUS:
+ modemstate = 0;
+#ifdef TIOCMGET
+ ioctl(tty->fd, TIOCMGET, &result);
+ if (result & TIOCM_CTS)
+ modemstate |= SERIAL_MS_CTS;
+ if (result & TIOCM_DSR)
+ modemstate |= SERIAL_MS_DSR;
+ if (result & TIOCM_RNG)
+ modemstate |= SERIAL_MS_RNG;
+ if (result & TIOCM_CAR)
+ modemstate |= SERIAL_MS_CAR;
+ if (result & TIOCM_DTR)
+ modemstate |= SERIAL_MS_DTR;
+ if (result & TIOCM_RTS)
+ modemstate |= SERIAL_MS_RTS;
+#endif
+ DEBUG_SVC("SERIAL_GET_MODEMSTATUS %X", modemstate);
+ length = 4;
+ stream_write_uint32(output, modemstate);
+ break;
+
+ case IOCTL_SERIAL_GET_COMMSTATUS:
+ length = 18;
+ stream_write_uint32(output, 0); /* Errors */
+ stream_write_uint32(output, 0); /* Hold reasons */
+
+ result = 0;
+#ifdef TIOCINQ
+ ioctl(tty->fd, TIOCINQ, &result);
+#endif
+ stream_write_uint32(output, result); /* Amount in in queue */
+ if (result)
+ DEBUG_SVC("SERIAL_GET_COMMSTATUS in queue %d", result);
+
+ result = 0;
+#ifdef TIOCOUTQ
+ ioctl(tty->fd, TIOCOUTQ, &result);
+#endif
+ stream_write_uint32(output, result); /* Amount in out queue */
+ DEBUG_SVC("SERIAL_GET_COMMSTATUS out queue %d", result);
+
+ stream_write_uint8(output, 0); /* EofReceived */
+ stream_write_uint8(output, 0); /* WaitForImmediate */
+ break;
+
+ case IOCTL_SERIAL_PURGE:
+ stream_read_uint32(input, purge_mask);
+ DEBUG_SVC("SERIAL_PURGE purge_mask %X", purge_mask);
+ if ((purge_mask & SERIAL_PURGE_TXCLEAR)
+ && (purge_mask & SERIAL_PURGE_RXCLEAR))
+ tcflush(tty->fd, TCIOFLUSH);
+ else if (purge_mask & SERIAL_PURGE_TXCLEAR)
+ tcflush(tty->fd, TCOFLUSH);
+ else if (purge_mask & SERIAL_PURGE_RXCLEAR)
+ tcflush(tty->fd, TCIFLUSH);
+
+ if (purge_mask & SERIAL_PURGE_TXABORT)
+ *abort_io |= SERIAL_ABORT_IO_WRITE;
+ if (purge_mask & SERIAL_PURGE_RXABORT)
+ *abort_io |= SERIAL_ABORT_IO_READ;
+ break;
+ case IOCTL_SERIAL_WAIT_ON_MASK:
+ DEBUG_SVC("SERIAL_WAIT_ON_MASK %X", tty->wait_mask);
+ tty->event_pending = 1;
+ length = 4;
+ if (serial_tty_get_event(tty, &result))
+ {
+ DEBUG_SVC("WAIT end event = %X", result);
+ stream_write_uint32(output, result);
+ break;
+ }
+ ret = STATUS_PENDING;
+ break;
+
+ case IOCTL_SERIAL_SET_BREAK_ON:
+ DEBUG_SVC("SERIAL_SET_BREAK_ON");
+ tcsendbreak(tty->fd, 0);
+ break;
+
+ case IOCTL_SERIAL_RESET_DEVICE:
+ DEBUG_SVC("SERIAL_RESET_DEVICE");
+ break;
+
+ case IOCTL_SERIAL_SET_BREAK_OFF:
+ DEBUG_SVC("SERIAL_SET_BREAK_OFF");
+ break;
+
+ case IOCTL_SERIAL_SET_XOFF:
+ DEBUG_SVC("SERIAL_SET_XOFF");
+ break;
+
+ case IOCTL_SERIAL_SET_XON:
+ DEBUG_SVC("SERIAL_SET_XON");
+ tcflow(tty->fd, TCION);
+ break;
+
+ default:
+ DEBUG_SVC("NOT FOUND IoControlCode SERIAL IOCTL %d", IoControlCode);
+ return STATUS_INVALID_PARAMETER;
+ }
+
+ /* Write OutputBufferLength */
+ pos = stream_get_pos(output);
+ stream_set_pos(output, 16);
+ stream_write_uint32(output, length);
+ stream_set_pos(output, pos);
+
+ return ret;
+}
+
+boolean serial_tty_read(SERIAL_TTY* tty, uint8* buffer, uint32* Length)
+{
+ long timeout = 90;
+ struct termios *ptermios;
+ ssize_t r;
+
+ DEBUG_SVC("in");
+ ptermios = tty->ptermios;
+
+ /* Set timeouts kind of like the windows serial timeout parameters. Multiply timeout
+ with requested read size */
+ if (tty->read_total_timeout_multiplier | tty->read_total_timeout_constant)
+ {
+ timeout =
+ (tty->read_total_timeout_multiplier * (*Length) +
+ tty->read_total_timeout_constant + 99) / 100;
+ }
+ else if (tty->read_interval_timeout)
+ {
+ timeout = (tty->read_interval_timeout * (*Length) + 99) / 100;
+ }
+
+ /* If a timeout is set, do a blocking read, which times out after some time.
+ It will make FreeRDP less responsive, but it will improve serial performance,
+ by not reading one character at a time. */
+ if (timeout == 0)
+ {
+ ptermios->c_cc[VTIME] = 0;
+ ptermios->c_cc[VMIN] = 0;
+ }
+ else
+ {
+ ptermios->c_cc[VTIME] = timeout;
+ ptermios->c_cc[VMIN] = 1;
+ }
+
+ tcsetattr(tty->fd, TCSANOW, ptermios);
+
+ memset(buffer, 0, *Length);
+ r = read(tty->fd, buffer, *Length);
+ if (r < 0)
+ return False;
+
+ tty->event_txempty = r;
+ *Length = r;
+
+ return True;
+}
+
+boolean serial_tty_write(SERIAL_TTY* tty, uint8* buffer, uint32 Length)
+{
+ ssize_t r;
+ uint32 event_txempty = Length;
+
+ DEBUG_SVC("in");
+
+ while (Length > 0)
+ {
+ r = write(tty->fd, buffer, Length);
+ if (r < 0)
+ return False;
+
+ Length -= r;
+ buffer += r;
+ }
+ tty->event_txempty = event_txempty;
+
+ return True;
+}
+
+void serial_tty_free(SERIAL_TTY* tty)
+{
+ DEBUG_SVC("in");
+
+ if (tty->fd >= 0)
+ {
+ tcsetattr(tty->fd, TCSANOW, tty->pold_termios);
+ close(tty->fd);
+ }
+
+ xfree(tty->ptermios);
+ xfree(tty->pold_termios);
+ xfree(tty);
+}
+
+SERIAL_TTY* serial_tty_new(const char* path, uint32 id)
+{
+ SERIAL_TTY* tty;
+
+ tty = xnew(SERIAL_TTY);
+ tty->id = id;
+ tty->fd = open(path, O_RDWR | O_NOCTTY | O_NONBLOCK);
+ if (tty->fd < 0)
+ {
+ perror("open");
+ DEBUG_WARN("failed to open device %s", path);
+ return NULL;
+ }
+ else
+ DEBUG_SVC("tty fd %d successfully opened", tty->fd);
+
+ tty->ptermios = (struct termios*) malloc(sizeof(struct termios));
+ memset(tty->ptermios, 0, sizeof(struct termios));
+ tty->pold_termios = (struct termios*) malloc(sizeof(struct termios));
+ memset(tty->pold_termios, 0, sizeof(struct termios));
+ tcgetattr(tty->fd, tty->pold_termios);
+
+ if (!tty_get_termios(tty))
+ {
+ DEBUG_WARN("%s access denied", path);
+ fflush(stdout);
+ return NULL;
+ }
+
+ tty->ptermios->c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | IGNCR | ICRNL | IXON);
+ tty->ptermios->c_iflag = IGNPAR | ICRNL;
+ tty->ptermios->c_oflag &= ~OPOST;
+ tty->ptermios->c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
+ tty->ptermios->c_cflag &= ~(CSIZE | PARENB);
+ tty->ptermios->c_cflag |= CLOCAL | CREAD | CS8;
+ tcsetattr(tty->fd, TCSANOW, tty->ptermios);
+
+ tty->event_txempty = 0;
+ tty->event_cts = 0;
+ tty->event_dsr = 0;
+ tty->event_rlsd = 0;
+ tty->event_pending = 0;
+
+ /* all read and writes should be non-blocking */
+ if (fcntl(tty->fd, F_SETFL, O_NONBLOCK) == -1)
+ {
+ DEBUG_WARN("%s fcntl", path);
+ perror("fcntl");
+ return NULL;
+ }
+
+ tty->read_total_timeout_constant = 5;
+
+ return tty;
+}
+
+boolean serial_tty_get_event(SERIAL_TTY* tty, uint32* result)
+{
+ int bytes;
+ boolean ret = False;
+
+ DEBUG_SVC("in");
+
+ *result = 0;
+
+#ifdef TIOCINQ
+ /* When wait_mask is set to zero we ought to cancel it all
+ For reference: http://msdn.microsoft.com/en-us/library/aa910487.aspx */
+ if (tty->wait_mask == 0)
+ {
+ tty->event_pending = 0;
+ return True;
+ }
+
+ ioctl(tty->fd, TIOCINQ, &bytes);
+
+ if (bytes > 0)
+ {
+ DEBUG_SVC("bytes %d", bytes);
+
+ if (bytes > tty->event_rlsd)
+ {
+ tty->event_rlsd = bytes;
+ if (tty->wait_mask & SERIAL_EV_RLSD)
+ {
+ DEBUG_SVC("SERIAL_EV_RLSD");
+ *result |= SERIAL_EV_RLSD;
+ ret = True;
+ }
+
+ }
+
+ if ((bytes > 1) && (tty->wait_mask & SERIAL_EV_RXFLAG))
+ {
+ DEBUG_SVC("SERIAL_EV_RXFLAG bytes %d", bytes);
+ *result |= SERIAL_EV_RXFLAG;
+ ret = True;
+ }
+ if ((tty->wait_mask & SERIAL_EV_RXCHAR))
+ {
+ DEBUG_SVC("SERIAL_EV_RXCHAR bytes %d", bytes);
+ *result |= SERIAL_EV_RXCHAR;
+ ret = True;
+ }
+
+ }
+ else
+ {
+ tty->event_rlsd = 0;
+ }
+#endif
+
+#ifdef TIOCOUTQ
+ ioctl(tty->fd, TIOCOUTQ, &bytes);
+ if ((bytes == 0)
+ && (tty->event_txempty > 0) && (tty->wait_mask & SERIAL_EV_TXEMPTY))
+ {
+ DEBUG_SVC("SERIAL_EV_TXEMPTY");
+ *result |= SERIAL_EV_TXEMPTY;
+ ret = True;
+ }
+ tty->event_txempty = bytes;
+#endif
+
+ ioctl(tty->fd, TIOCMGET, &bytes);
+ if ((bytes & TIOCM_DSR) != tty->event_dsr)
+ {
+ tty->event_dsr = bytes & TIOCM_DSR;
+ if (tty->wait_mask & SERIAL_EV_DSR)
+ {
+ DEBUG_SVC("SERIAL_EV_DSR %s", (bytes & TIOCM_DSR) ? "ON" : "OFF");
+ *result |= SERIAL_EV_DSR;
+ ret = True;
+ }
+ }
+
+ if ((bytes & TIOCM_CTS) != tty->event_cts)
+ {
+ tty->event_cts = bytes & TIOCM_CTS;
+ if (tty->wait_mask & SERIAL_EV_CTS)
+ {
+ DEBUG_SVC("SERIAL_EV_CTS %s", (bytes & TIOCM_CTS) ? "ON" : "OFF");
+ *result |= SERIAL_EV_CTS;
+ ret = True;
+ }
+ }
+
+ if (ret)
+ tty->event_pending = 0;
+
+ return ret;
+}
+
+static boolean tty_get_termios(SERIAL_TTY* tty)
+{
+ speed_t speed;
+ struct termios *ptermios;
+ ptermios = tty->ptermios;
+
+ DEBUG_SVC("tcgetattr? %d", tcgetattr(tty->fd, ptermios) >= 0);
+ if (tcgetattr(tty->fd, ptermios) < 0)
+ return False;
+
+ speed = cfgetispeed(ptermios);
+ switch (speed)
+ {
+#ifdef B75
+ case B75:
+ tty->baud_rate = 75;
+ break;
+#endif
+#ifdef B110
+ case B110:
+ tty->baud_rate = 110;
+ break;
+#endif
+#ifdef B134
+ case B134:
+ tty->baud_rate = 134;
+ break;
+#endif
+#ifdef B150
+ case B150:
+ tty->baud_rate = 150;
+ break;
+#endif
+#ifdef B300
+ case B300:
+ tty->baud_rate = 300;
+ break;
+#endif
+#ifdef B600
+ case B600:
+ tty->baud_rate = 600;
+ break;
+#endif
+#ifdef B1200
+ case B1200:
+ tty->baud_rate = 1200;
+ break;
+#endif
+#ifdef B1800
+ case B1800:
+ tty->baud_rate = 1800;
+ break;
+#endif
+#ifdef B2400
+ case B2400:
+ tty->baud_rate = 2400;
+ break;
+#endif
+#ifdef B4800
+ case B4800:
+ tty->baud_rate = 4800;
+ break;
+#endif
+#ifdef B9600
+ case B9600:
+ tty->baud_rate = 9600;
+ break;
+#endif
+#ifdef B19200
+ case B19200:
+ tty->baud_rate = 19200;
+ break;
+#endif
+#ifdef B38400
+ case B38400:
+ tty->baud_rate = 38400;
+ break;
+#endif
+#ifdef B57600
+ case B57600:
+ tty->baud_rate = 57600;
+ break;
+#endif
+#ifdef B115200
+ case B115200:
+ tty->baud_rate = 115200;
+ break;
+#endif
+#ifdef B230400
+ case B230400:
+ tty->baud_rate = 230400;
+ break;
+#endif
+#ifdef B460800
+ case B460800:
+ tty->baud_rate = 460800;
+ break;
+#endif
+ default:
+ tty->baud_rate = 9600;
+ break;
+ }
+
+ speed = cfgetospeed(ptermios);
+ tty->dtr = (speed == B0) ? 0 : 1;
+
+ tty->stop_bits = (ptermios->c_cflag & CSTOPB) ? SERIAL_STOP_BITS_2 : SERIAL_STOP_BITS_1;
+ tty->parity =
+ (ptermios->c_cflag & PARENB) ? ((ptermios->c_cflag & PARODD) ? SERIAL_ODD_PARITY :
+ SERIAL_EVEN_PARITY) : SERIAL_NO_PARITY;
+ switch (ptermios->c_cflag & CSIZE)
+ {
+ case CS5:
+ tty->word_length = 5;
+ break;
+ case CS6:
+ tty->word_length = 6;
+ break;
+ case CS7:
+ tty->word_length = 7;
+ break;
+ default:
+ tty->word_length = 8;
+ break;
+ }
+
+ if (ptermios->c_cflag & CRTSCTS)
+ {
+ tty->control = SERIAL_DTR_CONTROL | SERIAL_CTS_HANDSHAKE | SERIAL_ERROR_ABORT;
+ }
+ else
+ {
+ tty->control = SERIAL_DTR_CONTROL | SERIAL_ERROR_ABORT;
+ }
+
+ tty->xonoff = SERIAL_DSR_SENSITIVITY;
+ if (ptermios->c_iflag & IXON)
+ tty->xonoff |= SERIAL_XON_HANDSHAKE;
+
+ if (ptermios->c_iflag & IXOFF)
+ tty->xonoff |= SERIAL_XOFF_HANDSHAKE;
+
+ tty->chars[SERIAL_CHAR_XON] = ptermios->c_cc[VSTART];
+ tty->chars[SERIAL_CHAR_XOFF] = ptermios->c_cc[VSTOP];
+ tty->chars[SERIAL_CHAR_EOF] = ptermios->c_cc[VEOF];
+ tty->chars[SERIAL_CHAR_BREAK] = ptermios->c_cc[VINTR];
+ tty->chars[SERIAL_CHAR_ERROR] = ptermios->c_cc[VKILL];
+
+ return True;
+}
+
+static void tty_set_termios(SERIAL_TTY* tty)
+{
+ speed_t speed;
+ struct termios *ptermios;
+
+ DEBUG_SVC("in");
+ ptermios = tty->ptermios;
+ switch (tty->baud_rate)
+ {
+#ifdef B75
+ case 75:
+ speed = B75;
+ break;
+#endif
+#ifdef B110
+ case 110:
+ speed = B110;
+ break;
+#endif
+#ifdef B134
+ case 134:
+ speed = B134;
+ break;
+#endif
+#ifdef B150
+ case 150:
+ speed = B150;
+ break;
+#endif
+#ifdef B300
+ case 300:
+ speed = B300;
+ break;
+#endif
+#ifdef B600
+ case 600:
+ speed = B600;
+ break;
+#endif
+#ifdef B1200
+ case 1200:
+ speed = B1200;
+ break;
+#endif
+#ifdef B1800
+ case 1800:
+ speed = B1800;
+ break;
+#endif
+#ifdef B2400
+ case 2400:
+ speed = B2400;
+ break;
+#endif
+#ifdef B4800
+ case 4800:
+ speed = B4800;
+ break;
+#endif
+#ifdef B9600
+ case 9600:
+ speed = B9600;
+ break;
+#endif
+#ifdef B19200
+ case 19200:
+ speed = B19200;
+ break;
+#endif
+#ifdef B38400
+ case 38400:
+ speed = B38400;
+ break;
+#endif
+#ifdef B57600
+ case 57600:
+ speed = B57600;
+ break;
+#endif
+#ifdef B115200
+ case 115200:
+ speed = B115200;
+ break;
+#endif
+#ifdef B230400
+ case 230400:
+ speed = B115200;
+ break;
+#endif
+#ifdef B460800
+ case 460800:
+ speed = B115200;
+ break;
+#endif
+ default:
+ speed = B9600;
+ break;
+ }
+
+#ifdef CBAUD
+ ptermios->c_cflag &= ~CBAUD;
+ ptermios->c_cflag |= speed;
+#else
+ /* on systems with separate ispeed and ospeed, we can remember the speed
+ in ispeed while changing DTR with ospeed */
+ cfsetispeed(tty->ptermios, speed);
+ cfsetospeed(tty->ptermios, tty->dtr ? speed : 0);
+#endif
+
+ ptermios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CSIZE | CRTSCTS);
+ switch (tty->stop_bits)
+ {
+ case SERIAL_STOP_BITS_2:
+ ptermios->c_cflag |= CSTOPB;
+ break;
+ default:
+ ptermios->c_cflag &= ~CSTOPB;
+ break;
+ }
+
+ switch (tty->parity)
+ {
+ case SERIAL_EVEN_PARITY:
+ ptermios->c_cflag |= PARENB;
+ break;
+ case SERIAL_ODD_PARITY:
+ ptermios->c_cflag |= PARENB | PARODD;
+ break;
+ case SERIAL_NO_PARITY:
+ ptermios->c_cflag &= ~(PARENB | PARODD);
+ break;
+ }
+
+ switch (tty->word_length)
+ {
+ case 5:
+ ptermios->c_cflag |= CS5;
+ break;
+ case 6:
+ ptermios->c_cflag |= CS6;
+ break;
+ case 7:
+ ptermios->c_cflag |= CS7;
+ break;
+ default:
+ ptermios->c_cflag |= CS8;
+ break;
+ }
+
+#if 0
+ if (tty->rts)
+ ptermios->c_cflag |= CRTSCTS;
+ else
+ ptermios->c_cflag &= ~CRTSCTS;
+#endif
+
+ if (tty->control & SERIAL_CTS_HANDSHAKE)
+ {
+ ptermios->c_cflag |= CRTSCTS;
+ }
+ else
+ {
+ ptermios->c_cflag &= ~CRTSCTS;
+ }
+
+
+ if (tty->xonoff & SERIAL_XON_HANDSHAKE)
+ {
+ ptermios->c_iflag |= IXON | IMAXBEL;
+ }
+ if (tty->xonoff & SERIAL_XOFF_HANDSHAKE)
+ {
+ ptermios->c_iflag |= IXOFF | IMAXBEL;
+ }
+
+ if ((tty->xonoff & (SERIAL_XOFF_HANDSHAKE | SERIAL_XON_HANDSHAKE)) == 0)
+ {
+ ptermios->c_iflag &= ~IXON;
+ ptermios->c_iflag &= ~IXOFF;
+ }
+
+ ptermios->c_cc[VSTART] = tty->chars[SERIAL_CHAR_XON];
+ ptermios->c_cc[VSTOP] = tty->chars[SERIAL_CHAR_XOFF];
+ ptermios->c_cc[VEOF] = tty->chars[SERIAL_CHAR_EOF];
+ ptermios->c_cc[VINTR] = tty->chars[SERIAL_CHAR_BREAK];
+ ptermios->c_cc[VKILL] = tty->chars[SERIAL_CHAR_ERROR];
+
+ tcsetattr(tty->fd, TCSANOW, ptermios);
+}
+
+static uint32 tty_write_data(SERIAL_TTY* tty, uint8* data, int len)
+{
+ ssize_t r;
+
+ DEBUG_SVC("in");
+
+ r = write(tty->fd, data, len);
+ if (r < 0)
+ return tty_get_error_status();
+
+ tty->event_txempty = r;
+
+ return STATUS_SUCCESS;
+}
+
+static int tty_get_error_status()
+{
+ DEBUG_SVC("in errno %d", errno);
+
+ switch (errno)
+ {
+ case EACCES:
+ case ENOTDIR:
+ case ENFILE:
+ return STATUS_ACCESS_DENIED;
+ case EISDIR:
+ return STATUS_FILE_IS_A_DIRECTORY;
+ case EEXIST:
+ return STATUS_OBJECT_NAME_COLLISION;
+ case EBADF:
+ return STATUS_INVALID_HANDLE;
+ default:
+ return STATUS_NO_SUCH_FILE;
+ }
+}
--- /dev/null
+/**
+ * FreeRDP: A Remote Desktop Protocol client.
+ * Serial Port Device Service Virtual Channel
+ *
+ * Copyright 2011 O.S. Systems Software Ltda.
+ * Copyright 2011 Eduardo Fiss Beloni <beloni@ossystems.com.br>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __SERIAL_TTY_H
+#define __SERIAL_TTY_H
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <dirent.h>
+
+typedef struct _SERIAL_TTY SERIAL_TTY;
+struct _SERIAL_TTY
+{
+ uint32 id;
+ int fd;
+
+ int dtr;
+ int rts;
+ uint32 control;
+ uint32 xonoff;
+ uint32 onlimit;
+ uint32 offlimit;
+ uint32 baud_rate;
+ uint32 queue_in_size;
+ uint32 queue_out_size;
+ uint32 wait_mask;
+ uint32 read_interval_timeout;
+ uint32 read_total_timeout_multiplier;
+ uint32 read_total_timeout_constant;
+ uint32 write_total_timeout_multiplier;
+ uint32 write_total_timeout_constant;
+ uint8 stop_bits;
+ uint8 parity;
+ uint8 word_length;
+ uint8 chars[6];
+ struct termios* ptermios;
+ struct termios* pold_termios;
+ int event_txempty;
+ int event_cts;
+ int event_dsr;
+ int event_rlsd;
+ int event_pending;
+};
+
+
+SERIAL_TTY* serial_tty_new(const char* path, uint32 id);
+void serial_tty_free(SERIAL_TTY* tty);
+
+boolean serial_tty_read(SERIAL_TTY* tty, uint8* buffer, uint32* Length);
+boolean serial_tty_write(SERIAL_TTY* tty, uint8* buffer, uint32 Length);
+uint32 serial_tty_control(SERIAL_TTY* tty, uint32 IoControlCode, STREAM* input, STREAM* output, uint32* abort_io);
+
+boolean serial_tty_get_event(SERIAL_TTY* tty, uint32* result);
+
+#endif /* __SERIAL_TTY_H */