arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support

The OrangePi Zero 2 is a development board with the new H616 SoC. It
comes with the following features:
  - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
  - 512MiB/1GiB DDR3 DRAM
  - AXP305 PMIC
  - Raspberry-Pi-1 compatible GPIO header
  - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports
  - 1 USB 2.0 host port
  - 1 USB 2.0 type C port (power supply + OTG)
  - MicroSD slot
  - on-board 2MiB bootable SPI NOR flash
  - 1Gbps Ethernet port (via RTL8211F PHY)
  - micro-HDMI port
  - (yet) unsupported Allwinner WiFi/BT chip

Add the devicetree file describing the currently supported features.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-7-andre.przywara@arm.com

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 8fa5c06..df2214e 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -38,3 +38,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
new file mode 100644 (file)
index 0000000..02893f3
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       model = "OrangePi Zero2";
+       compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
+
+       aliases {
+               ethernet0 = &emac0;
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led-0 {
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_RED>;
+                       gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+                       default-state = "on";
+               };
+
+               led-1 {
+                       function = LED_FUNCTION_STATUS;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+               };
+       };
+
+       reg_vcc5v: vcc5v {
+               /* board wide 5V supply directly from the USB-C socket */
+               compatible = "regulator-fixed";
+               regulator-name = "vcc-5v";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-always-on;
+       };
+};
+
+&emac0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ext_rgmii_pins>;
+       phy-mode = "rgmii";
+       phy-handle = <&ext_rgmii_phy>;
+       phy-supply = <&reg_dcdce>;
+       allwinner,rx-delay-ps = <3100>;
+       allwinner,tx-delay-ps = <700>;
+       status = "okay";
+};
+
+&mdio0 {
+       ext_rgmii_phy: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&mmc0 {
+       vmmc-supply = <&reg_dcdce>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;  /* PF6 */
+       bus-width = <4>;
+       status = "okay";
+};
+
+&r_rsb {
+       status = "okay";
+
+       axp305: pmic@745 {
+               compatible = "x-powers,axp305", "x-powers,axp805",
+                            "x-powers,axp806";
+               interrupt-controller;
+               #interrupt-cells = <1>;
+               reg = <0x745>;
+
+               x-powers,self-working-mode;
+               vina-supply = <&reg_vcc5v>;
+               vinb-supply = <&reg_vcc5v>;
+               vinc-supply = <&reg_vcc5v>;
+               vind-supply = <&reg_vcc5v>;
+               vine-supply = <&reg_vcc5v>;
+               aldoin-supply = <&reg_vcc5v>;
+               bldoin-supply = <&reg_vcc5v>;
+               cldoin-supply = <&reg_vcc5v>;
+
+               regulators {
+                       reg_aldo1: aldo1 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-name = "vcc-sys";
+                       };
+
+                       reg_aldo2: aldo2 {      /* 3.3V on headers */
+                               regulator-always-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-name = "vcc3v3-ext";
+                       };
+
+                       reg_aldo3: aldo3 {      /* 3.3V on headers */
+                               regulator-always-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-name = "vcc3v3-ext2";
+                       };
+
+                       reg_bldo1: bldo1 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-name = "vcc1v8";
+                       };
+
+                       bldo2 {
+                               /* unused */
+                       };
+
+                       bldo3 {
+                               /* unused */
+                       };
+
+                       bldo4 {
+                               /* unused */
+                       };
+
+                       cldo1 {
+                               /* reserved */
+                       };
+
+                       cldo2 {
+                               /* unused */
+                       };
+
+                       cldo3 {
+                               /* unused */
+                       };
+
+                       reg_dcdca: dcdca {
+                               regulator-always-on;
+                               regulator-min-microvolt = <810000>;
+                               regulator-max-microvolt = <1100000>;
+                               regulator-name = "vdd-cpu";
+                       };
+
+                       reg_dcdcc: dcdcc {
+                               regulator-always-on;
+                               regulator-min-microvolt = <810000>;
+                               regulator-max-microvolt = <990000>;
+                               regulator-name = "vdd-gpu-sys";
+                       };
+
+                       reg_dcdcd: dcdcd {
+                               regulator-always-on;
+                               regulator-min-microvolt = <1500000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-name = "vdd-dram";
+                       };
+
+                       reg_dcdce: dcdce {
+                               regulator-always-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-name = "vcc-eth-mmc";
+                       };
+
+                       sw {
+                               /* unused */
+                       };
+               };
+       };
+};
+
+&pio {
+       vcc-pc-supply = <&reg_aldo1>;
+       vcc-pf-supply = <&reg_aldo1>;
+       vcc-pg-supply = <&reg_bldo1>;
+       vcc-ph-supply = <&reg_aldo1>;
+       vcc-pi-supply = <&reg_aldo1>;
+};
+
+&spi0  {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <40000000>;
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_ph_pins>;
+       status = "okay";
+};