struct nand_chip *nand = mtd->priv;
struct docg4_priv *doc = nand->priv;
struct nand_bbt_descr *bbtd = nand->badblock_pattern;
- int block = (int)(ofs >> nand->bbt_erase_shift);
int page = (int)(ofs >> nand->page_shift);
uint32_t g4_addr = mtd_to_docg4_address(page, 0);
if (buf == NULL)
return -ENOMEM;
- /* update bbt in memory */
- nand->bbt[block / 4] |= 0x01 << ((block & 0x03) * 2);
-
/* write bit-wise negation of pattern to oob buffer */
memset(nand->oob_poi, 0xff, mtd->oobsize);
for (i = 0; i < bbtd->len; i++)
write_page_prologue(mtd, g4_addr);
docg4_write_page(mtd, nand, buf, 1);
ret = pageprog(mtd);
- if (!ret)
- mtd->ecc_stats.badblocks++;
kfree(buf);
{
struct nand_chip *chip = mtd->priv;
struct gpmi_nand_data *this = chip->priv;
- int block, ret = 0;
+ int ret = 0;
uint8_t *block_mark;
int column, page, status, chipnr;
- /* Get block number */
- block = (int)(ofs >> chip->bbt_erase_shift);
- if (chip->bbt)
- chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+ chipnr = (int)(ofs >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
- /* Do we have a flash based bad block table ? */
- if (chip->bbt_options & NAND_BBT_USE_FLASH)
- ret = nand_update_bbt(mtd, ofs);
- else {
- chipnr = (int)(ofs >> chip->chip_shift);
- chip->select_chip(mtd, chipnr);
+ column = this->swap_block_mark ? mtd->writesize : 0;
- column = this->swap_block_mark ? mtd->writesize : 0;
+ /* Write the block mark. */
+ block_mark = this->data_buffer_dma;
+ block_mark[0] = 0; /* bad block marker */
- /* Write the block mark. */
- block_mark = this->data_buffer_dma;
- block_mark[0] = 0; /* bad block marker */
+ /* Shift to get page */
+ page = (int)(ofs >> chip->page_shift);
- /* Shift to get page */
- page = (int)(ofs >> chip->page_shift);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page);
+ chip->write_buf(mtd, block_mark, 1);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page);
- chip->write_buf(mtd, block_mark, 1);
- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ ret = -EIO;
- status = chip->waitfunc(mtd, chip);
- if (status & NAND_STATUS_FAIL)
- ret = -EIO;
-
- chip->select_chip(mtd, -1);
- }
- if (!ret)
- mtd->ecc_stats.badblocks++;
+ chip->select_chip(mtd, -1);
return ret;
}
}
/**
- * nand_default_block_markbad - [DEFAULT] mark a block bad
+ * nand_default_block_markbad - [DEFAULT] mark a block bad via bad block marker
* @mtd: MTD device structure
* @ofs: offset from device start
*
* This is the default implementation, which can be overridden by a hardware
- * specific driver. We try operations in the following order, according to our
- * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
+ * specific driver. It provides the details for writing a bad block marker to a
+ * block.
+ */
+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
+ uint8_t buf[2] = { 0, 0 };
+ int ret = 0, res, i = 0;
+
+ ops.datbuf = NULL;
+ ops.oobbuf = buf;
+ ops.ooboffs = chip->badblockpos;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ ops.ooboffs &= ~0x01;
+ ops.len = ops.ooblen = 2;
+ } else {
+ ops.len = ops.ooblen = 1;
+ }
+ ops.mode = MTD_OPS_PLACE_OOB;
+
+ /* Write to first/last page(s) if necessary */
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+ ofs += mtd->erasesize - mtd->writesize;
+ do {
+ res = nand_do_write_oob(mtd, ofs, &ops);
+ if (!ret)
+ ret = res;
+
+ i++;
+ ofs += mtd->writesize;
+ } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
+
+ return ret;
+}
+
+/**
+ * nand_block_markbad_lowlevel - mark a block bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * This function performs the generic NAND bad block marking steps (i.e., bad
+ * block table(s) and/or marker(s)). We only allow the hardware driver to
+ * specify how to write bad block markers to OOB (chip->block_markbad).
+ *
+ * We try operations in the following order, according to our bbt_options
+ * (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
* (1) erase the affected block, to allow OOB marker to be written cleanly
* (2) update in-memory BBT
* (3) write bad block marker to OOB area of affected block
* Note that we retain the first error encountered in (3) or (4), finish the
* procedures, and dump the error in the end.
*/
-static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
{
struct nand_chip *chip = mtd->priv;
- uint8_t buf[2] = { 0, 0 };
- int block, res, ret = 0, i = 0;
+ int block, res, ret = 0;
int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM);
if (write_oob) {
/* Write bad block marker to OOB */
if (write_oob) {
- struct mtd_oob_ops ops;
- loff_t wr_ofs = ofs;
-
nand_get_device(mtd, FL_WRITING);
-
- ops.datbuf = NULL;
- ops.oobbuf = buf;
- ops.ooboffs = chip->badblockpos;
- if (chip->options & NAND_BUSWIDTH_16) {
- ops.ooboffs &= ~0x01;
- ops.len = ops.ooblen = 2;
- } else {
- ops.len = ops.ooblen = 1;
- }
- ops.mode = MTD_OPS_PLACE_OOB;
-
- /* Write to first/last page(s) if necessary */
- if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
- wr_ofs += mtd->erasesize - mtd->writesize;
- do {
- res = nand_do_write_oob(mtd, wr_ofs, &ops);
- if (!ret)
- ret = res;
-
- i++;
- wr_ofs += mtd->writesize;
- } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
-
+ ret = chip->block_markbad(mtd, ofs);
nand_release_device(mtd);
}
*/
static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- struct nand_chip *chip = mtd->priv;
int ret;
ret = nand_block_isbad(mtd, ofs);
return ret;
}
- return chip->block_markbad(mtd, ofs);
+ return nand_block_markbad_lowlevel(mtd, ofs);
}
/**