usb: add driver for xsens motion trackers
authorFrans Klaver <frans.klaver@xsens.com>
Fri, 25 Jan 2013 16:05:44 +0000 (17:05 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 25 Jan 2013 17:56:54 +0000 (09:56 -0800)
Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/serial/Kconfig
drivers/usb/serial/Makefile
drivers/usb/serial/xsens_mt.c [new file with mode: 0644]

index 76f4622..dad8363 100644 (file)
@@ -647,6 +647,18 @@ config USB_SERIAL_VIVOPAY_SERIAL
           To compile this driver as a module, choose M here: the
           module will be called vivopay-serial.
 
+config USB_SERIAL_XSENS_MT
+       tristate "Xsens motion tracker serial interface driver"
+       help
+         Say Y here if you want to use Xsens motion trackers.
+
+         This driver supports the new generation of motion trackers
+         by Xsens. Older devices can be accessed using the FTDI_SIO
+         driver.
+
+         To compile this driver as a module, choose M here: the
+         module will be called xsens_mt.
+
 config USB_SERIAL_ZIO
        tristate "ZIO Motherboard USB serial interface driver"
        help
index 3b3e730..eaf5ca1 100644 (file)
@@ -61,5 +61,6 @@ obj-$(CONFIG_USB_SERIAL_VISOR)                        += visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)             += whiteheat.o
 obj-$(CONFIG_USB_SERIAL_XIRCOM)                        += keyspan_pda.o
 obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL)                += vivopay-serial.o
+obj-$(CONFIG_USB_SERIAL_XSENS_MT)              += xsens_mt.o
 obj-$(CONFIG_USB_SERIAL_ZIO)                   += zio.o
 obj-$(CONFIG_USB_SERIAL_ZTE)                   += zte_ev.o
diff --git a/drivers/usb/serial/xsens_mt.c b/drivers/usb/serial/xsens_mt.c
new file mode 100644 (file)
index 0000000..1d5798d
--- /dev/null
@@ -0,0 +1,86 @@
+/*
+ * Xsens MT USB driver
+ *
+ * Copyright (C) 2013 Xsens <info@xsens.com>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License version
+ *  2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define XSENS_VID 0x2639
+
+#define MTi_10_IMU_PID         0x0001
+#define MTi_20_VRU_PID         0x0002
+#define MTi_30_AHRS_PID                0x0003
+
+#define MTi_100_IMU_PID                0x0011
+#define MTi_200_VRU_PID                0x0012
+#define MTi_300_AHRS_PID       0x0013
+
+#define MTi_G_700_GPS_INS_PID  0x0017
+
+static const struct usb_device_id id_table[] = {
+       { USB_DEVICE(XSENS_VID, MTi_10_IMU_PID) },
+       { USB_DEVICE(XSENS_VID, MTi_20_VRU_PID) },
+       { USB_DEVICE(XSENS_VID, MTi_30_AHRS_PID) },
+
+       { USB_DEVICE(XSENS_VID, MTi_100_IMU_PID) },
+       { USB_DEVICE(XSENS_VID, MTi_200_VRU_PID) },
+       { USB_DEVICE(XSENS_VID, MTi_300_AHRS_PID) },
+
+       { USB_DEVICE(XSENS_VID, MTi_G_700_GPS_INS_PID) },
+       { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int has_required_endpoints(const struct usb_host_interface *interface)
+{
+       __u8 i;
+       int has_bulk_in = 0;
+       int has_bulk_out = 0;
+
+       for (i = 0; i < interface->desc.bNumEndpoints; ++i) {
+               if (usb_endpoint_is_bulk_in(&interface->endpoint[i].desc))
+                       has_bulk_in = 1;
+               else if (usb_endpoint_is_bulk_out(&interface->endpoint[i].desc))
+                       has_bulk_out = 1;
+       }
+
+       return has_bulk_in && has_bulk_out;
+}
+
+static int xsens_mt_probe(struct usb_serial *serial,
+                                       const struct usb_device_id *id)
+{
+       if (!has_required_endpoints(serial->interface->cur_altsetting))
+               return -ENODEV;
+       return 0;
+}
+
+static struct usb_serial_driver xsens_mt_device = {
+       .driver = {
+               .owner = THIS_MODULE,
+               .name = "xsens_mt",
+       },
+       .id_table = id_table,
+       .num_ports = 1,
+
+       .probe = xsens_mt_probe,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+       &xsens_mt_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_LICENSE("GPL");