i2c: Create a new Kconfig for I2C

At present we have CONFIG_SPL_I2C but not CONFIG_I2C. The reason
CONFIG_I2C is not strictly necessary is that:

a) We have CONFIG_SYS_I2C_LEGACY and CONFIG_DM_I2C for the two possible
   i2c stacks
b) In U-Boot proper, we always build drivers/i2c/ regardless of the
   options

Still, it is better to have CONFIG_I2C - it makes U-Boot proper similar to
SPL/TPL, so we can (in a future commit) simplify the Makefile rules.

Enable it by default, since as above, we have separate options
(SYS_I2C_LEGACY and DM_I2C) to control whether it is 'really' enabled.

Once we have migrated I2C to driver model, we can drop SYS_I2C_LEGACY and
make DM_I2C become I2C. For now, this lets us simplify the Makefile rules.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index d6d2b67b8ebd969da78cdfd220e202fbf3655785..63d03a3cebfcd969fb9cbc3c294c28d1a19808ff 100644 (file)
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -2,7 +2,29 @@
 # I2C subsystem configuration
 #
 
-menu "I2C support"
+menuconfig I2C
+       bool "I2C support"
+       default y
+       help
+         Note:
+         This is a stand-in for an option to enable I2C support. In fact this
+         simply enables building of the I2C directory for U-Boot. The actual
+         I2C feature is enabled by DM_I2C (for driver model) and
+         the #define CONFIG_SYS_I2C_LEGACY (for the legacy I2C stack).
+
+         So at present there is no need to ever disable this option.
+
+         Eventually it will:
+
+         Enable support for the I2C (Inter-Integrated Circuit) bus in U-Boot.
+         I2C works with a clock and data line which can be driven by a
+         one or more masters or slaves. It is a fairly complex bus but is
+         widely used as it only needs two lines for communication. Speeds of
+         400kbps are typical but up to 3.4Mbps is supported by some
+         hardware. Enable this option to build the drivers in drivers/i2c as
+         part of a U-Boot build.
+
+if I2C
 
 config DM_I2C
        bool "Enable Driver Model for I2C drivers"
@@ -528,4 +550,4 @@ config SYS_I2C_IHS
 
 source "drivers/i2c/muxes/Kconfig"
 
-endmenu
+endif