arm64: dts: qcom: Add msm8916 USB configuration nodes

Add Host, Device and OTG configuration nodes.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9ff0eb4..5911de0 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -268,6 +268,45 @@
                        status = "disabled";
                };
 
+               usb_dev: usb@78d9000 {
+                       compatible = "qcom,ci-hdrc";
+                       reg = <0x78d9000 0x400>;
+                       dr_mode = "peripheral";
+                       interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+                       usb-phy = <&usb_otg>;
+                       status = "disabled";
+               };
+
+               usb_host: ehci@78d9000 {
+                       compatible = "qcom,ehci-host";
+                       reg = <0x78d9000 0x400>;
+                       interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+                       usb-phy = <&usb_otg>;
+                       status = "disabled";
+               };
+
+               usb_otg: phy@78d9000 {
+                       compatible = "qcom,usb-otg-snps";
+                       reg = <0x78d9000 0x400>;
+                       interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
+                                    <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+
+                       qcom,vdd-levels = <1 5 7>;
+                       qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
+                       dr_mode = "peripheral";
+                       qcom,otg-control = <2>; // PMIC
+
+                       clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+                                <&gcc GCC_USB_HS_SYSTEM_CLK>,
+                                <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+                       clock-names = "iface", "core", "sleep";
+
+                       resets = <&gcc GCC_USB2A_PHY_BCR>,
+                                <&gcc GCC_USB_HS_BCR>;
+                       reset-names = "phy", "link";
+                       status = "disabled";
+               };
+
                intc: interrupt-controller@b000000 {
                        compatible = "qcom,msm-qgic2";
                        interrupt-controller;