ALSA: hda - unmute pin amplifier in infoframe setup for Haswell

When Gfx driver reconnects a port and transcoder, the pin amplifier will
be muted. To enable sound, the pin amp need to be unmuted.

This patch
- moves pin amp unmuting from stream preparing to hdmi_setup_audio_infoframe().
  So if port:transcoder reconnection happens during stream playback, the ELDV
  unsol event can stil trigger pin's amp unmuting when re-setting up audio
  info frame.

- remove reading pin amp status before unmuting for speed-up, since pin amp
  should always be unmuted.

- rename haswell_verify_pin_D0() to haswell_verify_D0(), since the convertor
  power state is also fixed here.

This patch is mostly based on suggestion of David Henningsson.

Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 009bccc..3a15225 100644 (file)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -896,6 +896,11 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec,
        if (!channels)
                return;
 
+       if (is_haswell(codec))
+               snd_hda_codec_write(codec, pin_nid, 0,
+                                           AC_VERB_SET_AMP_GAIN_MUTE,
+                                           AMP_OUT_UNMUTE);
+
        eld = &per_pin->sink_eld;
        if (!eld->monitor_present)
                return;
@@ -1035,10 +1040,10 @@ static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
                hdmi_non_intrinsic_event(codec, res);
 }
 
-static void haswell_verify_pin_D0(struct hda_codec *codec,
+static void haswell_verify_D0(struct hda_codec *codec,
                hda_nid_t cvt_nid, hda_nid_t nid)
 {
-       int pwr, lamp, ramp;
+       int pwr;
 
        /* For Haswell, the converter 1/2 may keep in D3 state after bootup,
         * thus pins could only choose converter 0 for use. Make sure the
@@ -1054,25 +1059,6 @@ static void haswell_verify_pin_D0(struct hda_codec *codec,
                pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
                snd_printd("Haswell HDMI audio: Power for pin 0x%x is now D%d\n", nid, pwr);
        }
-
-       lamp = snd_hda_codec_read(codec, nid, 0,
-                                 AC_VERB_GET_AMP_GAIN_MUTE,
-                                 AC_AMP_GET_LEFT | AC_AMP_GET_OUTPUT);
-       ramp = snd_hda_codec_read(codec, nid, 0,
-                                 AC_VERB_GET_AMP_GAIN_MUTE,
-                                 AC_AMP_GET_RIGHT | AC_AMP_GET_OUTPUT);
-       if (lamp != ramp) {
-               snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
-                                   AC_AMP_SET_RIGHT | AC_AMP_SET_OUTPUT | lamp);
-
-               lamp = snd_hda_codec_read(codec, nid, 0,
-                                 AC_VERB_GET_AMP_GAIN_MUTE,
-                                 AC_AMP_GET_LEFT | AC_AMP_GET_OUTPUT);
-               ramp = snd_hda_codec_read(codec, nid, 0,
-                                 AC_VERB_GET_AMP_GAIN_MUTE,
-                                 AC_AMP_GET_RIGHT | AC_AMP_GET_OUTPUT);
-               snd_printd("Haswell HDMI audio: Mute after set on pin 0x%x: [0x%x 0x%x]\n", nid, lamp, ramp);
-       }
 }
 
 /*
@@ -1090,7 +1076,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
        int new_pinctl = 0;
 
        if (is_haswell(codec))
-               haswell_verify_pin_D0(codec, cvt_nid, pin_nid);
+               haswell_verify_D0(codec, cvt_nid, pin_nid);
 
        if (snd_hda_query_pin_caps(codec, pin_nid) & AC_PINCAP_HBR) {
                pinctl = snd_hda_codec_read(codec, pin_nid, 0,
@@ -1361,13 +1347,9 @@ static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
                 * changed during the stream playback
                 */
                if (is_haswell(codec) &&
-                   eld->eld_valid && !old_eld_valid && per_pin->setup) {
-                       snd_hda_codec_write(codec, pin_nid, 0,
-                                           AC_VERB_SET_AMP_GAIN_MUTE,
-                                           AMP_OUT_UNMUTE);
+                   eld->eld_valid && !old_eld_valid && per_pin->setup)
                        hdmi_setup_audio_infoframe(codec, per_pin,
                                                   per_pin->non_pcm);
-               }
        }
        mutex_unlock(&pin_eld->lock);