#define DEBUG(x) x
-// boards constants
-// IO space len
+/* boards constants */
+/* IO space len */
#define PCLx1x_RANGE 16
-//#define outb(x,y) printk("OUTB(%x, 200+%d)\n", x,y-0x200); outb(x,y)
+/* #define outb(x,y) printk("OUTB(%x, 200+%d)\n", x,y-0x200); outb(x,y) */
-// INTEL 8254 counters
+/* INTEL 8254 counters */
#define PCL816_CTR0 4
#define PCL816_CTR1 5
#define PCL816_CTR2 6
-// R: counter read-back register W: counter control
+/* R: counter read-back register W: counter control */
#define PCL816_CTRCTL 7
-// R: A/D high byte W: A/D range control
+/* R: A/D high byte W: A/D range control */
#define PCL816_RANGE 9
-// W: clear INT request
+/* W: clear INT request */
#define PCL816_CLRINT 10
-// R: next mux scan channel W: mux scan channel & range control pointer
+/* R: next mux scan channel W: mux scan channel & range control pointer */
#define PCL816_MUX 11
-// R/W: operation control register
+/* R/W: operation control register */
#define PCL816_CONTROL 12
-// R: return status byte W: set DMA/IRQ
+/* R: return status byte W: set DMA/IRQ */
#define PCL816_STATUS 13
#define PCL816_STATUS_DRDY_MASK 0x80
-// R: low byte of A/D W: soft A/D trigger
+/* R: low byte of A/D W: soft A/D trigger */
#define PCL816_AD_LO 8
-// R: high byte of A/D W: A/D range control
+/* R: high byte of A/D W: A/D range control */
#define PCL816_AD_HI 9
-// type of interrupt handler
+/* type of interrupt handler */
#define INT_TYPE_AI1_INT 1
#define INT_TYPE_AI1_DMA 2
#define INT_TYPE_AI3_INT 4
#define INT_TYPE_AI1_DMA_RTC 9
#define INT_TYPE_AI3_DMA_RTC 10
-// RTC stuff...
+/* RTC stuff... */
#define RTC_IRQ 8
#define RTC_IO_EXTENT 0x10
#endif
};
struct pcl816_board {
- const char *name; // board name
- int n_ranges; // len of range list
- int n_aichan; // num of A/D chans in diferencial mode
- unsigned int ai_ns_min; // minimal alllowed delay between samples (in ns)
- int n_aochan; // num of D/A chans
- int n_dichan; // num of DI chans
- int n_dochan; // num of DO chans
- const struct comedi_lrange *ai_range_type; // default A/D rangelist
- const struct comedi_lrange *ao_range_type; // dafault D/A rangelist
- unsigned int io_range; // len of IO space
- unsigned int IRQbits; // allowed interrupts
- unsigned int DMAbits; // allowed DMA chans
- int ai_maxdata; // maxdata for A/D
- int ao_maxdata; // maxdata for D/A
- int ai_chanlist; // allowed len of channel list A/D
- int ao_chanlist; // allowed len of channel list D/A
- int i8254_osc_base; // 1/frequency of on board oscilator in ns
+ const char *name; /* board name */
+ int n_ranges; /* len of range list */
+ int n_aichan; /* num of A/D chans in diferencial mode */
+ unsigned int ai_ns_min; /* minimal alllowed delay between samples (in ns) */
+ int n_aochan; /* num of D/A chans */
+ int n_dichan; /* num of DI chans */
+ int n_dochan; /* num of DO chans */
+ const struct comedi_lrange *ai_range_type; /* default A/D rangelist */
+ const struct comedi_lrange *ao_range_type; /* dafault D/A rangelist */
+ unsigned int io_range; /* len of IO space */
+ unsigned int IRQbits; /* allowed interrupts */
+ unsigned int DMAbits; /* allowed DMA chans */
+ int ai_maxdata; /* maxdata for A/D */
+ int ao_maxdata; /* maxdata for D/A */
+ int ai_chanlist; /* allowed len of channel list A/D */
+ int ao_chanlist; /* allowed len of channel list D/A */
+ int i8254_osc_base; /* 1/frequency of on board oscilator in ns */
};
static const struct pcl816_board boardtypes[] = {
{"pcl816", 8, 16, 10000, 1, 16, 16, &range_pcl816,
&range_pcl816, PCLx1x_RANGE,
- 0x00fc, // IRQ mask
- 0x0a, // DMA mask
- 0xffff, // 16-bit card
- 0xffff, // D/A maxdata
+ 0x00fc, /* IRQ mask */
+ 0x0a, /* DMA mask */
+ 0xffff, /* 16-bit card */
+ 0xffff, /* D/A maxdata */
1024,
- 1, // ao chan list
+ 1, /* ao chan list */
100},
{"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816,
&range_pcl816, PCLx1x_RANGE,
struct pcl816_private {
- unsigned int dma; // used DMA, 0=don't use DMA
- int dma_rtc; // 1=RTC used with DMA, 0=no RTC alloc
+ unsigned int dma; /* used DMA, 0=don't use DMA */
+ int dma_rtc; /* 1=RTC used with DMA, 0=no RTC alloc */
#ifdef unused
- unsigned long rtc_iobase; // RTC port region
+ unsigned long rtc_iobase; /* RTC port region */
unsigned int rtc_iosize;
unsigned int rtc_irq;
#endif
- unsigned long dmabuf[2]; // pointers to begin of DMA buffers
- unsigned int dmapages[2]; // len of DMA buffers in PAGE_SIZEs
- unsigned int hwdmaptr[2]; // hardware address of DMA buffers
- unsigned int hwdmasize[2]; // len of DMA buffers in Bytes
- unsigned int dmasamplsize; // size in samples hwdmasize[0]/2
- unsigned int last_top_dma; // DMA pointer in last RTC int
- int next_dma_buf; // which DMA buffer will be used next round
- long dma_runs_to_end; // how many we must permorm DMA transfer to end of record
- unsigned long last_dma_run; // how many bytes we must transfer on last DMA page
-
- unsigned int ai_scans; // len of scanlist
- unsigned char ai_neverending; // if=1, then we do neverending record (you must use cancel())
- int irq_free; // 1=have allocated IRQ
- int irq_blocked; // 1=IRQ now uses any subdev
+ unsigned long dmabuf[2]; /* pointers to begin of DMA buffers */
+ unsigned int dmapages[2]; /* len of DMA buffers in PAGE_SIZEs */
+ unsigned int hwdmaptr[2]; /* hardware address of DMA buffers */
+ unsigned int hwdmasize[2]; /* len of DMA buffers in Bytes */
+ unsigned int dmasamplsize; /* size in samples hwdmasize[0]/2 */
+ unsigned int last_top_dma; /* DMA pointer in last RTC int */
+ int next_dma_buf; /* which DMA buffer will be used next round */
+ long dma_runs_to_end; /* how many we must permorm DMA transfer to end of record */
+ unsigned long last_dma_run; /* how many bytes we must transfer on last DMA page */
+
+ unsigned int ai_scans; /* len of scanlist */
+ unsigned char ai_neverending; /* if=1, then we do neverending record (you must use cancel()) */
+ int irq_free; /* 1=have allocated IRQ */
+ int irq_blocked; /* 1=IRQ now uses any subdev */
#ifdef unused
- int rtc_irq_blocked; // 1=we now do AI with DMA&RTC
+ int rtc_irq_blocked; /* 1=we now do AI with DMA&RTC */
#endif
- int irq_was_now_closed; // when IRQ finish, there's stored int816_mode for last interrupt
- int int816_mode; // who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma
- struct comedi_subdevice *last_int_sub; // ptr to subdevice which now finish
- int ai_act_scan; // how many scans we finished
- unsigned int ai_act_chanlist[16]; // MUX setting for actual AI operations
- unsigned int ai_act_chanlist_len; // how long is actual MUX list
- unsigned int ai_act_chanlist_pos; // actual position in MUX list
- unsigned int ai_poll_ptr; // how many sampes transfer poll
- struct comedi_subdevice *sub_ai; // ptr to AI subdevice
+ int irq_was_now_closed; /* when IRQ finish, there's stored int816_mode for last interrupt */
+ int int816_mode; /* who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma */
+ struct comedi_subdevice *last_int_sub; /* ptr to subdevice which now finish */
+ int ai_act_scan; /* how many scans we finished */
+ unsigned int ai_act_chanlist[16]; /* MUX setting for actual AI operations */
+ unsigned int ai_act_chanlist_len; /* how long is actual MUX list */
+ unsigned int ai_act_chanlist_pos; /* actual position in MUX list */
+ unsigned int ai_poll_ptr; /* how many sampes transfer poll */
+ struct comedi_subdevice *sub_ai; /* ptr to AI subdevice */
#ifdef unused
- struct timer_list rtc_irq_timer; // timer for RTC sanity check
- unsigned long rtc_freq; // RTC int freq
+ struct timer_list rtc_irq_timer; /* timer for RTC sanity check */
+ unsigned long rtc_freq; /* RTC int freq */
#endif
};
int timeout;
DPRINTK("mode 0 analog input\n");
- // software trigger, DMA and INT off
+ /* software trigger, DMA and INT off */
outb(0, dev->iobase + PCL816_CONTROL);
- // clear INT (conversion end) flag
+ /* clear INT (conversion end) flag */
outb(0, dev->iobase + PCL816_CLRINT);
- // Set the input channel
+ /* Set the input channel */
outb(CR_CHAN(insn->chanspec) & 0xf, dev->iobase + PCL816_MUX);
outb(CR_RANGE(insn->chanspec), dev->iobase + PCL816_RANGE); /* select gain */
while (timeout--) {
if (!(inb(dev->iobase + PCL816_STATUS) &
PCL816_STATUS_DRDY_MASK)) {
- // return read value
+ /* return read value */
data[n] =
((inb(dev->iobase +
PCL816_AD_HI) << 8) |
}
comedi_udelay(1);
}
- // Return timeout error
+ /* Return timeout error */
if (!timeout) {
comedi_error(dev, "A/D insn timeout\n");
data[0] = 0;
break;
comedi_udelay(1);
}
- if (!timeout) { // timeout, bail error
+ if (!timeout) { /* timeout, bail error */
outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */
comedi_error(dev, "A/D mode1/3 IRQ without DRDY!");
pcl816_ai_cancel(dev, s);
}
- // get the sample
+ /* get the sample */
low = inb(dev->iobase + PCL816_AD_LO);
hi = inb(dev->iobase + PCL816_AD_HI);
}
if (!devpriv->ai_neverending)
- if (devpriv->ai_act_scan >= devpriv->ai_scans) { // all data sampled
+ if (devpriv->ai_act_scan >= devpriv->ai_scans) { /* all data sampled */
pcl816_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
s->async->events |= COMEDI_CB_BLOCK;
disable_dma(devpriv->dma);
this_dma_buf = devpriv->next_dma_buf;
- if ((devpriv->dma_runs_to_end > -1) || devpriv->ai_neverending) { // switch dma bufs
+ if ((devpriv->dma_runs_to_end > -1) || devpriv->ai_neverending) { /* switch dma bufs */
devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
set_dma_mode(devpriv->dma, DMA_MODE_READ);
dma_flags = claim_dma_lock();
-// clear_dma_ff (devpriv->dma);
+/* clear_dma_ff (devpriv->dma); */
set_dma_addr(devpriv->dma,
devpriv->hwdmaptr[devpriv->next_dma_buf]);
if (devpriv->dma_runs_to_end) {
(!devpriv->int816_mode)) {
if (devpriv->irq_was_now_closed) {
devpriv->irq_was_now_closed = 0;
- // comedi_error(dev,"last IRQ..");
+ /* comedi_error(dev,"last IRQ.."); */
return IRQ_HANDLED;
}
comedi_error(dev, "bad IRQ!");
return -EINVAL;
if (cmd->scan_end_arg != cmd->chanlist_len)
return -EINVAL;
-// if(cmd->chanlist_len>MAX_CHANLIST_LEN) return -EINVAL;
+/* if(cmd->chanlist_len>MAX_CHANLIST_LEN) return -EINVAL; */
if (devpriv->irq_blocked)
return -EBUSY;
i8253_cascade_ns_to_timer(this_board->i8254_osc_base, &divisor1,
&divisor2, &cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
- if (divisor1 == 1) { // PCL816 crash if any divisor is set to 1
+ if (divisor1 == 1) { /* PCL816 crash if any divisor is set to 1 */
divisor1 = 2;
divisor2 /= 2;
}
}
}
- start_pacer(dev, -1, 0, 0); // stop pacer
+ start_pacer(dev, -1, 0, 0); /* stop pacer */
if (!check_and_setup_channel_list(dev, s, cmd->chanlist,
cmd->chanlist_len))
devpriv->ai_neverending = 1;
}
- if ((cmd->flags & TRIG_WAKE_EOS)) { // don't we want wake up every scan?
+ if ((cmd->flags & TRIG_WAKE_EOS)) { /* don't we want wake up every scan? */
printk("pl816: You wankt WAKE_EOS but I dont want handle it");
- // devpriv->ai_eos=1;
- //if (devpriv->ai_n_chan==1)
- // devpriv->dma=0; // DMA is useless for this situation
+ /* devpriv->ai_eos=1; */
+ /* if (devpriv->ai_n_chan==1) */
+ /* devpriv->dma=0; // DMA is useless for this situation */
}
if (devpriv->dma) {
bytes = devpriv->hwdmasize[0];
if (!devpriv->ai_neverending) {
- bytes = s->async->cmd.chanlist_len * s->async->cmd.chanlist_len * sizeof(short); // how many
- devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; // how many DMA pages we must fill
- devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; //on last dma transfer must be moved
+ bytes = s->async->cmd.chanlist_len * s->async->cmd.chanlist_len * sizeof(short); /* how many */
+ devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; /* how many DMA pages we must fill */
+ devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; /* on last dma transfer must be moved */
devpriv->dma_runs_to_end--;
if (devpriv->dma_runs_to_end >= 0)
bytes = devpriv->hwdmasize[0];
switch (cmd->convert_src) {
case TRIG_TIMER:
devpriv->int816_mode = INT_TYPE_AI1_DMA;
- outb(0x32, dev->iobase + PCL816_CONTROL); // Pacer+IRQ+DMA
- outb(dmairq, dev->iobase + PCL816_STATUS); // write irq and DMA to card
+ outb(0x32, dev->iobase + PCL816_CONTROL); /* Pacer+IRQ+DMA */
+ outb(dmairq, dev->iobase + PCL816_STATUS); /* write irq and DMA to card */
break;
default:
devpriv->int816_mode = INT_TYPE_AI3_DMA;
- outb(0x34, dev->iobase + PCL816_CONTROL); // Ext trig+IRQ+DMA
- outb(dmairq, dev->iobase + PCL816_STATUS); // write irq to card
+ outb(0x34, dev->iobase + PCL816_CONTROL); /* Ext trig+IRQ+DMA */
+ outb(dmairq, dev->iobase + PCL816_STATUS); /* write irq to card */
break;
}
unsigned int top1, top2, i;
if (!devpriv->dma)
- return 0; // poll is valid only for DMA transfer
+ return 0; /* poll is valid only for DMA transfer */
comedi_spin_lock_irqsave(&dev->spinlock, flags);
for (i = 0; i < 20; i++) {
- top1 = get_dma_residue(devpriv->dma); // where is now DMA
+ top1 = get_dma_residue(devpriv->dma); /* where is now DMA */
top2 = get_dma_residue(devpriv->dma);
if (top1 == top2)
break;
return 0;
}
- top1 = devpriv->hwdmasize[0] - top1; // where is now DMA in buffer
- top1 >>= 1; // sample position
+ top1 = devpriv->hwdmasize[0] - top1; /* where is now DMA in buffer */
+ top1 >>= 1; /* sample position */
top2 = top1 - devpriv->ai_poll_ptr;
- if (top2 < 1) { // no new samples
+ if (top2 < 1) { /* no new samples */
comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
(short *) devpriv->dmabuf[devpriv->next_dma_buf],
devpriv->ai_poll_ptr, top2);
- devpriv->ai_poll_ptr = top1; // new buffer position
+ devpriv->ai_poll_ptr = top1; /* new buffer position */
comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
return s->async->buf_write_count - s->async->buf_read_count;
*/
static int pcl816_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s)
{
-// DEBUG(rt_printk("pcl816_ai_cancel()\n");)
+/* DEBUG(rt_printk("pcl816_ai_cancel()\n");) */
if (devpriv->irq_blocked > 0) {
switch (devpriv->int816_mode) {
#ifdef unused
case INT_TYPE_AI1_DMA_RTC:
case INT_TYPE_AI3_DMA_RTC:
- set_rtc_irq_bit(0); // stop RTC
+ set_rtc_irq_bit(0); /* stop RTC */
del_timer(&devpriv->rtc_irq_timer);
#endif
case INT_TYPE_AI1_DMA:
devpriv->irq_was_now_closed = devpriv->int816_mode;
devpriv->int816_mode = 0;
devpriv->last_int_sub = s;
-// s->busy = 0;
+/* s->busy = 0; */
break;
}
}
outb(0x00, iobase + PCL816_MUX);
comedi_udelay(1);
if (inb(iobase + PCL816_MUX) != 0x00)
- return 1; //there isn't card
+ return 1; /* there isn't card */
outb(0x55, iobase + PCL816_MUX);
comedi_udelay(1);
if (inb(iobase + PCL816_MUX) != 0x55)
- return 1; //there isn't card
+ return 1; /* there isn't card */
outb(0x00, iobase + PCL816_MUX);
comedi_udelay(1);
outb(0x18, iobase + PCL816_CONTROL);
comedi_udelay(1);
if (inb(iobase + PCL816_CONTROL) != 0x18)
- return 1; //there isn't card
- return 0; // ok, card exist
+ return 1; /* there isn't card */
+ return 0; /* ok, card exist */
}
/*
*/
static void pcl816_reset(struct comedi_device * dev)
{
-// outb (0, dev->iobase + PCL818_DA_LO); // DAC=0V
-// outb (0, dev->iobase + PCL818_DA_HI);
-// comedi_udelay (1);
-// outb (0, dev->iobase + PCL818_DO_HI); // DO=$0000
-// outb (0, dev->iobase + PCL818_DO_LO);
-// comedi_udelay (1);
+/* outb (0, dev->iobase + PCL818_DA_LO); DAC=0V */
+/* outb (0, dev->iobase + PCL818_DA_HI); */
+/* comedi_udelay (1); */
+/* outb (0, dev->iobase + PCL818_DO_HI); DO=$0000 */
+/* outb (0, dev->iobase + PCL818_DO_LO); */
+/* comedi_udelay (1); */
outb(0, dev->iobase + PCL816_CONTROL);
outb(0, dev->iobase + PCL816_MUX);
outb(0, dev->iobase + PCL816_CLRINT);
outb(0xff, dev->iobase + PCL816_CTR0);
outb(0x00, dev->iobase + PCL816_CTR0);
comedi_udelay(1);
- outb(0xb4, dev->iobase + PCL816_CTRCTL); // set counter 2 as mode 3
- outb(0x74, dev->iobase + PCL816_CTRCTL); // set counter 1 as mode 3
+ outb(0xb4, dev->iobase + PCL816_CTRCTL); /* set counter 2 as mode 3 */
+ outb(0x74, dev->iobase + PCL816_CTRCTL); /* set counter 1 as mode 3 */
comedi_udelay(1);
if (mode == 1) {
}
/* clear pending interrupts (just in case) */
-// outb(0, dev->iobase + PCL816_CLRINT);
+/* outb(0, dev->iobase + PCL816_CLRINT); */
}
/*
unsigned int chansegment[16];
unsigned int i, nowmustbechan, seglen, segpos;
- // correct channel and range number check itself comedi/range.c
+ /* correct channel and range number check itself comedi/range.c */
if (chanlen < 1) {
comedi_error(dev, "range/channel list is empty!");
return 0;
}
if (chanlen > 1) {
- chansegment[0] = chanlist[0]; // first channel is everytime ok
+ chansegment[0] = chanlist[0]; /* first channel is everytime ok */
for (i = 1, seglen = 1; i < chanlen; i++, seglen++) {
- // build part of chanlist
+ /* build part of chanlist */
DEBUG(rt_printk("%d. %d %d\n", i, CR_CHAN(chanlist[i]),
CR_RANGE(chanlist[i]));
)
if (chanlist[0] == chanlist[i])
- break; // we detect loop, this must by finish
+ break; /* we detect loop, this must by finish */
nowmustbechan =
(CR_CHAN(chansegment[i - 1]) + 1) % chanlen;
if (nowmustbechan != CR_CHAN(chanlist[i])) {
- // channel list isn't continous :-(
+ /* channel list isn't continous :-( */
rt_printk
("comedi%d: pcl816: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
dev->minor, i, CR_CHAN(chanlist[i]),
nowmustbechan, CR_CHAN(chanlist[0]));
return 0;
}
- chansegment[i] = chanlist[i]; // well, this is next correct channel in list
+ chansegment[i] = chanlist[i]; /* well, this is next correct channel in list */
}
- for (i = 0, segpos = 0; i < chanlen; i++) { // check whole chanlist
+ for (i = 0, segpos = 0; i < chanlen; i++) { /* check whole chanlist */
DEBUG(rt_printk("%d %d=%d %d\n",
CR_CHAN(chansegment[i % seglen]),
CR_RANGE(chansegment[i % seglen]),
CR_CHAN(chanlist[i % seglen]),
CR_RANGE(chanlist[i % seglen]),
CR_AREF(chansegment[i % seglen]));
- return 0; // chan/gain list is strange
+ return 0; /* chan/gain list is strange */
}
}
} else {
devpriv->ai_act_chanlist_len = seglen;
devpriv->ai_act_chanlist_pos = 0;
- for (i = 0; i < seglen; i++) { // store range list to card
+ for (i = 0; i < seglen; i++) { /* store range list to card */
devpriv->ai_act_chanlist[i] = CR_CHAN(chanlist[i]);
outb(CR_CHAN(chanlist[0]) & 0xf, dev->iobase + PCL816_MUX);
outb(CR_RANGE(chanlist[0]), dev->iobase + PCL816_RANGE); /* select gain */
outb(devpriv->ai_act_chanlist[0] | (devpriv->ai_act_chanlist[seglen - 1] << 4), dev->iobase + PCL816_MUX); /* select channel interval to scan */
- return 1; // we can serve this with MUX logic
+ return 1; /* we can serve this with MUX logic */
}
#ifdef unused
*/
static void free_resources(struct comedi_device * dev)
{
- //rt_printk("free_resource()\n");
+ /* rt_printk("free_resource()\n"); */
if (dev->private) {
pcl816_ai_cancel(dev, devpriv->sub_ai);
pcl816_reset(dev);
free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, this_board->io_range);
- //rt_printk("free_resource() end\n");
+ /* rt_printk("free_resource() end\n"); */
}
/*
unsigned long iobase;
unsigned int irq, dma;
unsigned long pages;
- //int i;
+ /* int i; */
struct comedi_subdevice *s;
/* claim our I/O space */
#ifdef unused
/* grab RTC for DMA operations */
devpriv->dma_rtc = 0;
- if (it->options[2] > 0) { // we want to use DMA
+ if (it->options[2] > 0) { /* we want to use DMA */
if (RTC_lock == 0) {
if (!request_region(RTC_PORT(0), RTC_IO_EXTENT,
"pcl816 (RTC)"))
devpriv->dmapages[0] = pages;
devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
- //rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE);
+ /* rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
- if (devpriv->dma_rtc == 0) { // we must do duble buff :-(
+ if (devpriv->dma_rtc == 0) { /* we must do duble buff :-( */
devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[1]) {
rt_printk
s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
s->n_chan = this_board->n_aichan;
s->subdev_flags |= SDF_DIFF;
- //printk (", %dchans DIFF DAC - %d", s->n_chan, i);
+ /* printk (", %dchans DIFF DAC - %d", s->n_chan, i); */
s->maxdata = this_board->ai_maxdata;
s->len_chanlist = this_board->ai_chanlist;
s->range_table = this_board->ai_range_type;
projects / platform / kernel / linux-3.10.git / commitdiff