arm: mvebu: dts: sync DTS

Update the uDPU DTS to the version that is pending upstream [1][2][3][4].

[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-4-robert.marko@sartura.hr/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-5-robert.marko@sartura.hr/
[3] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-6-robert.marko@sartura.hr/
[4] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-7-robert.marko@sartura.hr/

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 1f534c0..f21a855 100644 (file)
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -16,7 +16,7 @@
 
 / {
        model = "Methode uDPU Board";
-       compatible = "methode,udpu", "marvell,armada3720";
+       compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
 
        chosen {
                stdout-path = "serial0:115200n8";
@@ -28,35 +28,34 @@
        };
 
        leds {
-               pinctrl-names = "default";
                compatible = "gpio-leds";
 
-               power1 {
+               led-power1 {
                        label = "udpu:green:power";
                        gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
                };
 
-               power2 {
+               led-power2 {
                        label = "udpu:red:power";
                        gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
                };
 
-               network1 {
+               led-network1 {
                        label = "udpu:green:network";
                        gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
                };
 
-               network2 {
+               led-network2 {
                        label = "udpu:red:network";
                        gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
                };
 
-               alarm1 {
+               led-alarm1 {
                        label = "udpu:green:alarm";
                        gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
                };
 
-               alarm2 {
+               led-alarm2 {
                        label = "udpu:red:alarm";
                        gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
                };
@@ -99,7 +98,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&spi_quad_pins>;
 
-       spi-flash@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <54000000>;
@@ -153,14 +152,12 @@
        scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
        sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
-       nct375@48 {
-               status = "okay";
+       temp-sensor@48 {
                compatible = "ti,tmp75c";
                reg = <0x48>;
        };
 
-       nct375@49 {
-               status = "okay";
+       temp-sensor@49 {
                compatible = "ti,tmp75c";
                reg = <0x49>;
        };