omap: rx51: Add SI4713 FM transmitter

Add SI4713 FM transmitter supplies, platform data and setup to RX-51/N900.
It is connected to line output signals of TLV320AIC34 codec A part.
Driver can be either built-in or a module. It can be tuned with v4l2-ctl
from ivtv-utils. Following examples illustrate the use of it:

	v4l2-ctl -d /dev/radio0 --set-ctrl=mute=0 (power up)
	v4l2-ctl -d /dev/radio0 -f 107900 (tune 107.9 MHz)

	v4l2-ctl -d /dev/radio0 --set-ctrl=mute=1 (power down)

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e75e240..d0998f8 100644 (file)
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -36,6 +36,8 @@
 
 #include <sound/tlv320aic3x.h>
 #include <sound/tpa6130a2-plat.h>
+#include <media/radio-si4713.h>
+#include <media/si4713.h>
 
 #include <../drivers/staging/iio/light/tsl2563.h>
 
@@ -47,6 +49,8 @@
 
 #define RX51_WL1251_POWER_GPIO         87
 #define RX51_WL1251_IRQ_GPIO           42
+#define RX51_FMTX_RESET_GPIO           163
+#define RX51_FMTX_IRQ                  53
 
 /* list all spi devices here */
 enum {
@@ -357,10 +361,14 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = {
        REGULATOR_SUPPLY("DVDD", "2-0018"),
        REGULATOR_SUPPLY("IOVDD", "2-0019"),
        REGULATOR_SUPPLY("DVDD", "2-0019"),
+       /* Si4713 IO supply */
+       REGULATOR_SUPPLY("vio", "2-0063"),
 };
 
 static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
        REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+       /* Si4713 supply */
+       REGULATOR_SUPPLY("vdd", "2-0063"),
 };
 
 static struct regulator_consumer_supply rx51_vdac_supply[] = {
@@ -511,6 +519,41 @@ static struct regulator_init_data rx51_vio = {
        .consumer_supplies      = rx51_vio_supplies,
 };
 
+static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
+       .gpio_reset     = RX51_FMTX_RESET_GPIO,
+};
+
+static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = {
+       I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
+       .platform_data  = &rx51_si4713_i2c_data,
+};
+
+static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = {
+       .i2c_bus        = 2,
+       .subdev_board_info = &rx51_si4713_board_info,
+};
+
+static struct platform_device rx51_si4713_dev __initdata_or_module = {
+       .name   = "radio-si4713",
+       .id     = -1,
+       .dev    = {
+               .platform_data  = &rx51_si4713_data,
+       },
+};
+
+static __init void rx51_init_si4713(void)
+{
+       int err;
+
+       err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
+       if (err) {
+               printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
+               return;
+       }
+       rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ);
+       platform_device_register(&rx51_si4713_dev);
+}
+
 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 {
        /* FIXME this gpio setup is just a placeholder for now */
@@ -921,6 +964,7 @@ void __init rx51_peripherals_init(void)
        board_smc91x_init();
        rx51_add_gpio_keys();
        rx51_init_wl1251();
+       rx51_init_si4713();
        spi_register_board_info(rx51_peripherals_spi_board_info,
                                ARRAY_SIZE(rx51_peripherals_spi_board_info));