drm/i915/vlv: split CCK and DDR freq usage

It's possible that the CCK clock could run at a different rate than the
DDR clock, so use the same method to get CCK as the GMBUS code does when
calculating the new CDclk divider in the VLV display code.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c034413..3c17e95 100644 (file)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3894,24 +3894,17 @@ static void i9xx_pfit_enable(struct intel_crtc *crtc)
        I915_WRITE(BCLRPAT(crtc->pipe), 0);
 }
 
-static int valleyview_get_vco(struct drm_i915_private *dev_priv)
+int valleyview_get_vco(struct drm_i915_private *dev_priv)
 {
-       int vco;
+       int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
 
-       switch (dev_priv->mem_freq) {
-       default:
-       case 800:
-               vco = 800;
-               break;
-       case 1066:
-               vco = 1600;
-               break;
-       case 1333:
-               vco = 2000;
-               break;
-       }
+       /* Obtain SKU information */
+       mutex_lock(&dev_priv->dpio_lock);
+       hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
+               CCK_FUSE_HPLL_FREQ_MASK;
+       mutex_unlock(&dev_priv->dpio_lock);
 
-       return vco;
+       return vco_freq[hpll_freq];
 }
 
 /* Adjust CDclk dividers to allow high res or save power if possible */

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 9d2624f..6d701e7 100644 (file)
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -693,7 +693,7 @@ void i915_disable_vga_mem(struct drm_device *dev);
 void hsw_enable_ips(struct intel_crtc *crtc);
 void hsw_disable_ips(struct intel_crtc *crtc);
 void intel_display_set_init_power(struct drm_device *dev, bool enable);
-
+int valleyview_get_vco(struct drm_i915_private *dev_priv);
 
 /* intel_dp.c */
 void intel_dp_init(struct drm_device *dev, int output_reg, enum port port);

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 1263409..b1dc33f 100644 (file)
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -82,16 +82,11 @@ static int get_disp_clk_div(struct drm_i915_private *dev_priv,
 
 static void gmbus_set_freq(struct drm_i915_private *dev_priv)
 {
-       int vco_freq[] = { 800, 1600, 2000, 2400 };
-       int gmbus_freq = 0, cdclk_div, hpll_freq;
+       int vco, gmbus_freq = 0, cdclk_div;
 
        BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
 
-       /* Obtain SKU information */
-       mutex_lock(&dev_priv->dpio_lock);
-       hpll_freq =
-               vlv_cck_read(dev_priv, CCK_FUSE_REG) & CCK_FUSE_HPLL_FREQ_MASK;
-       mutex_unlock(&dev_priv->dpio_lock);
+       vco = valleyview_get_vco(dev_priv);
 
        /* Get the CDCLK divide ratio */
        cdclk_div = get_disp_clk_div(dev_priv, CDCLK);
@@ -102,7 +97,7 @@ static void gmbus_set_freq(struct drm_i915_private *dev_priv)
         * in fact 1MHz is the correct frequency.
         */
        if (cdclk_div)
-               gmbus_freq = (vco_freq[hpll_freq] << 1) / cdclk_div;
+               gmbus_freq = (vco << 1) / cdclk_div;
 
        if (WARN_ON(gmbus_freq == 0))
                return;