#define KSZ8081_LMD_SHORT_INDICATOR BIT(12)
#define KSZ8081_LMD_DELTA_TIME_MASK GENMASK(8, 0)
+#define KSZ9x31_LMD 0x12
+#define KSZ9x31_LMD_VCT_EN BIT(15)
+#define KSZ9x31_LMD_VCT_DIS_TX BIT(14)
+#define KSZ9x31_LMD_VCT_PAIR(n) (((n) & 0x3) << 12)
+#define KSZ9x31_LMD_VCT_SEL_RESULT 0
+#define KSZ9x31_LMD_VCT_SEL_THRES_HI BIT(10)
+#define KSZ9x31_LMD_VCT_SEL_THRES_LO BIT(11)
+#define KSZ9x31_LMD_VCT_SEL_MASK GENMASK(11, 10)
+#define KSZ9x31_LMD_VCT_ST_NORMAL 0
+#define KSZ9x31_LMD_VCT_ST_OPEN 1
+#define KSZ9x31_LMD_VCT_ST_SHORT 2
+#define KSZ9x31_LMD_VCT_ST_FAIL 3
+#define KSZ9x31_LMD_VCT_ST_MASK GENMASK(9, 8)
+#define KSZ9x31_LMD_VCT_DATA_REFLECTED_INVALID BIT(7)
+#define KSZ9x31_LMD_VCT_DATA_SIG_WAIT_TOO_LONG BIT(6)
+#define KSZ9x31_LMD_VCT_DATA_MASK100 BIT(5)
+#define KSZ9x31_LMD_VCT_DATA_NLP_FLP BIT(4)
+#define KSZ9x31_LMD_VCT_DATA_LO_PULSE_MASK GENMASK(3, 2)
+#define KSZ9x31_LMD_VCT_DATA_HI_PULSE_MASK GENMASK(1, 0)
+#define KSZ9x31_LMD_VCT_DATA_MASK GENMASK(7, 0)
+
/* Lan8814 general Interrupt control/status reg in GPHY specific block. */
#define LAN8814_INTC 0x18
#define LAN8814_INTS 0x1B
struct kszphy_ptp_priv ptp_priv;
const struct kszphy_type *type;
int led_mode;
+ u16 vct_ctrl1000;
bool rmii_ref_clk_sel;
bool rmii_ref_clk_sel_val;
u64 stats[ARRAY_SIZE(kszphy_hw_stats)];
return 0;
}
+static int ksz9x31_cable_test_start(struct phy_device *phydev)
+{
+ struct kszphy_priv *priv = phydev->priv;
+ int ret;
+
+ /* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+ * Prior to running the cable diagnostics, Auto-negotiation should
+ * be disabled, full duplex set and the link speed set to 1000Mbps
+ * via the Basic Control Register.
+ */
+ ret = phy_modify(phydev, MII_BMCR,
+ BMCR_SPEED1000 | BMCR_FULLDPLX |
+ BMCR_ANENABLE | BMCR_SPEED100,
+ BMCR_SPEED1000 | BMCR_FULLDPLX);
+ if (ret)
+ return ret;
+
+ /* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+ * The Master-Slave configuration should be set to Slave by writing
+ * a value of 0x1000 to the Auto-Negotiation Master Slave Control
+ * Register.
+ */
+ ret = phy_read(phydev, MII_CTRL1000);
+ if (ret < 0)
+ return ret;
+
+ /* Cache these bits, they need to be restored once LinkMD finishes. */
+ priv->vct_ctrl1000 = ret & (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
+ ret &= ~(CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
+ ret |= CTL1000_ENABLE_MASTER;
+
+ return phy_write(phydev, MII_CTRL1000, ret);
+}
+
+static int ksz9x31_cable_test_result_trans(u16 status)
+{
+ switch (FIELD_GET(KSZ9x31_LMD_VCT_ST_MASK, status)) {
+ case KSZ9x31_LMD_VCT_ST_NORMAL:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+ case KSZ9x31_LMD_VCT_ST_OPEN:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+ case KSZ9x31_LMD_VCT_ST_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+ case KSZ9x31_LMD_VCT_ST_FAIL:
+ fallthrough;
+ default:
+ return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+ }
+}
+
+static bool ksz9x31_cable_test_failed(u16 status)
+{
+ int stat = FIELD_GET(KSZ9x31_LMD_VCT_ST_MASK, status);
+
+ return stat == KSZ9x31_LMD_VCT_ST_FAIL;
+}
+
+static bool ksz9x31_cable_test_fault_length_valid(u16 status)
+{
+ switch (FIELD_GET(KSZ9x31_LMD_VCT_ST_MASK, status)) {
+ case KSZ9x31_LMD_VCT_ST_OPEN:
+ fallthrough;
+ case KSZ9x31_LMD_VCT_ST_SHORT:
+ return true;
+ }
+ return false;
+}
+
+static int ksz9x31_cable_test_fault_length(struct phy_device *phydev, u16 stat)
+{
+ int dt = FIELD_GET(KSZ9x31_LMD_VCT_DATA_MASK, stat);
+
+ /* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+ *
+ * distance to fault = (VCT_DATA - 22) * 4 / cable propagation velocity
+ */
+ if ((phydev->phy_id & MICREL_PHY_ID_MASK) == PHY_ID_KSZ9131)
+ dt = clamp(dt - 22, 0, 255);
+
+ return (dt * 400) / 10;
+}
+
+static int ksz9x31_cable_test_wait_for_completion(struct phy_device *phydev)
+{
+ int val, ret;
+
+ ret = phy_read_poll_timeout(phydev, KSZ9x31_LMD, val,
+ !(val & KSZ9x31_LMD_VCT_EN),
+ 30000, 100000, true);
+
+ return ret < 0 ? ret : 0;
+}
+
+static int ksz9x31_cable_test_get_pair(int pair)
+{
+ static const int ethtool_pair[] = {
+ ETHTOOL_A_CABLE_PAIR_A,
+ ETHTOOL_A_CABLE_PAIR_B,
+ ETHTOOL_A_CABLE_PAIR_C,
+ ETHTOOL_A_CABLE_PAIR_D,
+ };
+
+ return ethtool_pair[pair];
+}
+
+static int ksz9x31_cable_test_one_pair(struct phy_device *phydev, int pair)
+{
+ int ret, val;
+
+ /* KSZ9131RNX, DS00002841B-page 38, 4.14 LinkMD (R) Cable Diagnostic
+ * To test each individual cable pair, set the cable pair in the Cable
+ * Diagnostics Test Pair (VCT_PAIR[1:0]) field of the LinkMD Cable
+ * Diagnostic Register, along with setting the Cable Diagnostics Test
+ * Enable (VCT_EN) bit. The Cable Diagnostics Test Enable (VCT_EN) bit
+ * will self clear when the test is concluded.
+ */
+ ret = phy_write(phydev, KSZ9x31_LMD,
+ KSZ9x31_LMD_VCT_EN | KSZ9x31_LMD_VCT_PAIR(pair));
+ if (ret)
+ return ret;
+
+ ret = ksz9x31_cable_test_wait_for_completion(phydev);
+ if (ret)
+ return ret;
+
+ val = phy_read(phydev, KSZ9x31_LMD);
+ if (val < 0)
+ return val;
+
+ if (ksz9x31_cable_test_failed(val))
+ return -EAGAIN;
+
+ ret = ethnl_cable_test_result(phydev,
+ ksz9x31_cable_test_get_pair(pair),
+ ksz9x31_cable_test_result_trans(val));
+ if (ret)
+ return ret;
+
+ if (!ksz9x31_cable_test_fault_length_valid(val))
+ return 0;
+
+ return ethnl_cable_test_fault_length(phydev,
+ ksz9x31_cable_test_get_pair(pair),
+ ksz9x31_cable_test_fault_length(phydev, val));
+}
+
+static int ksz9x31_cable_test_get_status(struct phy_device *phydev,
+ bool *finished)
+{
+ struct kszphy_priv *priv = phydev->priv;
+ unsigned long pair_mask = 0xf;
+ int retries = 20;
+ int pair, ret, rv;
+
+ *finished = false;
+
+ /* Try harder if link partner is active */
+ while (pair_mask && retries--) {
+ for_each_set_bit(pair, &pair_mask, 4) {
+ ret = ksz9x31_cable_test_one_pair(phydev, pair);
+ if (ret == -EAGAIN)
+ continue;
+ if (ret < 0)
+ return ret;
+ clear_bit(pair, &pair_mask);
+ }
+ /* If link partner is in autonegotiation mode it will send 2ms
+ * of FLPs with at least 6ms of silence.
+ * Add 2ms sleep to have better chances to hit this silence.
+ */
+ if (pair_mask)
+ usleep_range(2000, 3000);
+ }
+
+ /* Report remaining unfinished pair result as unknown. */
+ for_each_set_bit(pair, &pair_mask, 4) {
+ ret = ethnl_cable_test_result(phydev,
+ ksz9x31_cable_test_get_pair(pair),
+ ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC);
+ }
+
+ *finished = true;
+
+ /* Restore cached bits from before LinkMD got started. */
+ rv = phy_modify(phydev, MII_CTRL1000,
+ CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER,
+ priv->vct_ctrl1000);
+ if (rv)
+ return rv;
+
+ return ret;
+}
+
static int ksz8873mll_config_aneg(struct phy_device *phydev)
{
return 0;
.phy_id = PHY_ID_KSZ9031,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ9031 Gigabit PHY",
+ .flags = PHY_POLL_CABLE_TEST,
.driver_data = &ksz9021_type,
.probe = kszphy_probe,
.get_features = ksz9031_get_features,
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ .cable_test_start = ksz9x31_cable_test_start,
+ .cable_test_get_status = ksz9x31_cable_test_get_status,
}, {
.phy_id = PHY_ID_LAN8814,
.phy_id_mask = MICREL_PHY_ID_MASK,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip KSZ9131 Gigabit PHY",
/* PHY_GBIT_FEATURES */
+ .flags = PHY_POLL_CABLE_TEST,
.driver_data = &ksz9021_type,
.probe = kszphy_probe,
.config_init = ksz9131_config_init,
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ .cable_test_start = ksz9x31_cable_test_start,
+ .cable_test_get_status = ksz9x31_cable_test_get_status,
}, {
.phy_id = PHY_ID_KSZ8873MLL,
.phy_id_mask = MICREL_PHY_ID_MASK,