arm: dts: rk3399-rockpro64: sync dts from linux kernel

The most important change for u-boot is the fix for the vdd-log pwm
voltage regulator to avoid overvoltage for the VD_LOGIC power domain.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts
index 1f2394e..e544deb 100644 (file)
--- a/arch/arm/dts/rk3399-rockpro64.dts
+++ b/arch/arm/dts/rk3399-rockpro64.dts
@@ -58,6 +58,13 @@
                };
        };
 
+       fan: pwm-fan {
+               compatible = "pwm-fan";
+               #cooling-cells = <2>;
+               fan-supply = <&vcc12v_dcin>;
+               pwms = <&pwm1 0 50000 0>;
+       };
+
        sdio_pwrseq: sdio-pwrseq {
                compatible = "mmc-pwrseq-simple";
                clocks = <&rk808 1>;
@@ -166,7 +173,7 @@
                regulator-always-on;
                regulator-boot-on;
                regulator-min-microvolt = <800000>;
-               regulator-max-microvolt = <1400000>;
+               regulator-max-microvolt = <1700000>;
                vin-supply = <&vcc5v0_sys>;
        };
 };
@@ -222,6 +229,10 @@
        status = "okay";
 };
 
+&hdmi_sound {
+       status = "okay";
+};
+
 &gpu {
        mali-supply = <&vdd_gpu>;
        status = "okay";
@@ -236,8 +247,8 @@
        rk808: pmic@1b {
                compatible = "rockchip,rk808";
                reg = <0x1b>;
-               interrupt-parent = <&gpio1>;
-               interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-parent = <&gpio3>;
+               interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
                #clock-cells = <1>;
                clock-output-names = "xin32k", "rk808-clkout2";
                pinctrl-names = "default";
@@ -504,11 +515,25 @@
        status = "okay";
 
        bt656-supply = <&vcc1v8_dvp>;
-       audio-supply = <&vcca1v8_codec>;
+       audio-supply = <&vcc_3v0>;
        sdmmc-supply = <&vcc_sdio>;
        gpio1830-supply = <&vcc_3v0>;
 };
 
+&pcie0 {
+       ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+       num-lanes = <4>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie_perst>;
+       vpcie12v-supply = <&vcc12v_dcin>;
+       vpcie3v3-supply = <&vcc3v3_pcie>;
+       status = "okay";
+};
+
+&pcie_phy {
+       status = "okay";
+};
+
 &pmu_io_domains {
        pmu1830-supply = <&vcc_3v0>;
        status = "okay";
@@ -538,6 +563,10 @@
        };
 
        pcie {
+               pcie_perst: pcie-perst {
+                       rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
                pcie_pwr_en: pcie-pwr-en {
                        rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
                };
@@ -545,7 +574,7 @@
 
        pmic {
                pmic_int_l: pmic-int-l {
-                       rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+                       rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
                };
 
                vsel1_gpio: vsel1-gpio {
@@ -580,6 +609,10 @@
        status = "okay";
 };
 
+&pwm1 {
+       status = "okay";
+};
+
 &pwm2 {
        status = "okay";
 };
@@ -591,7 +624,6 @@
 
 &sdmmc {
        bus-width = <4>;
-       cap-mmc-highspeed;
        cap-sd-highspeed;
        cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
        disable-wp;
@@ -603,12 +635,21 @@
 
 &sdhci {
        bus-width = <8>;
-       mmc-hs400-1_8v;
-       mmc-hs400-enhanced-strobe;
+       mmc-hs200-1_8v;
        non-removable;
        status = "okay";
 };
 
+&spi1 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+       };
+};
+
 &tcphy0 {
        status = "okay";
 };