dm9000: avoid sleeping in dm9000_timeout callback

On the DM9000B, dm9000_msleep() is called during the dm9000_timeout()
routine.  Since dm9000_timeout() holds the main spinlock through the
entire routine, mdelay() needs to be used rather than msleep().
Furthermore, the mutex_lock()/mutex_unlock() should be avoided so as to
not sleep with spinlocks held.

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 48870a8..13723c9 100644 (file)
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -109,6 +109,7 @@ typedef struct board_info {
        u8              imr_all;
 
        unsigned int    flags;
+       unsigned int    in_timeout:1;
        unsigned int    in_suspend:1;
        unsigned int    wake_supported:1;
 
@@ -273,7 +274,7 @@ static void dm9000_dumpblk_32bit(void __iomem *reg, int count)
  */
 static void dm9000_msleep(board_info_t *db, unsigned int ms)
 {
-       if (db->in_suspend)
+       if (db->in_suspend || db->in_timeout)
                mdelay(ms);
        else
                msleep(ms);
@@ -334,7 +335,8 @@ dm9000_phy_write(struct net_device *dev,
        unsigned long reg_save;
 
        dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
-       mutex_lock(&db->addr_lock);
+       if (!db->in_timeout)
+               mutex_lock(&db->addr_lock);
 
        spin_lock_irqsave(&db->lock, flags);
 
@@ -365,7 +367,8 @@ dm9000_phy_write(struct net_device *dev,
        writeb(reg_save, db->io_addr);
 
        spin_unlock_irqrestore(&db->lock, flags);
-       mutex_unlock(&db->addr_lock);
+       if (!db->in_timeout)
+               mutex_unlock(&db->addr_lock);
 }
 
 /* dm9000_set_io
@@ -971,6 +974,7 @@ static void dm9000_timeout(struct net_device *dev)
 
        /* Save previous register address */
        spin_lock_irqsave(&db->lock, flags);
+       db->in_timeout = 1;
        reg_save = readb(db->io_addr);
 
        netif_stop_queue(dev);
@@ -982,6 +986,7 @@ static void dm9000_timeout(struct net_device *dev)
 
        /* Restore previous register address */
        writeb(reg_save, db->io_addr);
+       db->in_timeout = 0;
        spin_unlock_irqrestore(&db->lock, flags);
 }