Another round of sorting Kconfig entries aplhabetically.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
config DISTRO_DEFAULTS
bool "Select defaults suitable for booting general purpose Linux distributions"
- imply USE_BOOTCOMMAND
- select CMD_BOOTZ if ARM && !ARM64
+ select AUTO_COMPLETE
+ select CMDLINE_EDITING
select CMD_BOOTI if ARM64
+ select CMD_BOOTZ if ARM && !ARM64
select CMD_DHCP if CMD_NET
- select CMD_PING if CMD_NET
- select CMD_PXE if NET
select CMD_ENV_EXISTS
select CMD_EXT2
select CMD_EXT4
select CMD_FAT
select CMD_FS_GENERIC
- imply CMD_MII if NET
select CMD_PART if PARTITIONS
+ select CMD_PING if CMD_NET
+ select CMD_PXE if NET
+ select ENV_VARS_UBOOT_CONFIG
select HUSH_PARSER
- select CMDLINE_EDITING
- select AUTO_COMPLETE
- select SYS_LONGHELP
select SUPPORT_RAW_INITRD
- select ENV_VARS_UBOOT_CONFIG
+ select SYS_LONGHELP
+ imply CMD_MII if NET
+ imply USE_BOOTCOMMAND
help
Select this to enable various options and commands which are suitable
for building u-boot for booting general purpose Linux distributions.
config FIT_ENABLE_SHA256_SUPPORT
bool "Support SHA256 checksum of FIT image contents"
- select SHA256
default y
+ select SHA256
help
Enable this to support SHA256 checksum of FIT image contents. A
SHA256 checksum is a 256-bit (32-byte) hash value used to check that
config FIT_SIGNATURE
bool "Enable signature verification of FIT uImages"
depends on DM
- select RSA
select HASH
+ select RSA
help
This option enables signature verification of FIT uImages,
using a hash signed and verified using RSA. If
config CPU_ARC750D
bool "ARC 750D"
- select ARC_MMU_V2
depends on ISA_ARCOMPACT
+ select ARC_MMU_V2
help
Choose this option to build an U-Boot for ARC750D CPU.
config CPU_ARC770D
bool "ARC 770D"
- select ARC_MMU_V3
depends on ISA_ARCOMPACT
+ select ARC_MMU_V3
help
Choose this option to build an U-Boot for ARC770D CPU.
config CPU_ARCEM6
bool "ARC EM6"
- select ARC_MMU_ABSENT
depends on ISA_ARCV2
+ select ARC_MMU_ABSENT
help
Next Generation ARC Core based on ISA-v2 ISA without MMU.
config CPU_ARCHS36
bool "ARC HS36"
- select ARC_MMU_ABSENT
depends on ISA_ARCV2
+ select ARC_MMU_ABSENT
help
Next Generation ARC Core based on ISA-v2 ISA without MMU.
config CPU_ARCHS38
bool "ARC HS38"
- select ARC_MMU_V4
depends on ISA_ARCV2
+ select ARC_MMU_V4
help
Next Generation ARC Core based on ISA-v2 ISA with MMU.
config ARCH_LS1021A
bool
+ select SYS_FSL_DDR_BE if SYS_FSL_DDR
+ select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
select SYS_FSL_ERRATUM_A008378
select SYS_FSL_ERRATUM_A008407
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_HAS_CCI400
- select SYS_FSL_SRDS_1
- select SYS_HAS_SERDES
- select SYS_FSL_DDR_BE if SYS_FSL_DDR
- select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR
select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+ imply CMD_PCI
imply SCSI
imply SCSI_AHCI
- imply CMD_PCI
menu "LS102xA architecture"
depends on ARCH_LS1021A
menu "ARMv8 secure monitor firmware"
config ARMV8_SEC_FIRMWARE_SUPPORT
bool "Enable ARMv8 secure monitor firmware framework support"
- select OF_LIBFDT
select FIT
+ select OF_LIBFDT
help
This framework is aimed at making secure monitor firmware load
process brief.
config SPL_ARMV8_SEC_FIRMWARE_SUPPORT
bool "Enable ARMv8 secure monitor firmware framework support for SPL"
- select SPL_OF_LIBFDT
select SPL_FIT
+ select SPL_OF_LIBFDT
help
Say Y here to support this framework in SPL phase.
config TARGET_EA20
bool "EA20 board"
+ select BOARD_LATE_INIT
select MACH_DAVINCI_DA850_EVM
select SOC_DA850
- select BOARD_LATE_INIT
config TARGET_OMAPL138_LCDK
bool "OMAPL138 LCDK"
config SOC_DA8XX
bool
- select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL
select SYS_DA850_DDR_INIT if SUPPORT_SPL || DA850_LOWLEVEL
+ select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL
config MACH_DAVINCI_DA850_EVM
bool
config ARCH_EXYNOS4
bool "Exynos4 SoC family"
- select CPU_V7A
select BOARD_EARLY_INIT_F
+ select CPU_V7A
help
Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
are multiple SoCs in this family including Exynos4210, Exynos4412,
config ARCH_EXYNOS5
bool "Exynos5 SoC family"
- select CPU_V7A
select BOARD_EARLY_INIT_F
+ select CPU_V7A
select SHA_HW_ACCEL
- imply CRC32_VERIFY
imply CMD_HASH
+ imply CRC32_VERIFY
imply HASH_VERIFY
- imply USB_ETHER_RTL8152
imply USB_ETHER_ASIX
+ imply USB_ETHER_RTL8152
imply USB_ETHER_SMSC95XX
help
Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and
prompt "EXYNOS4 board select"
config TARGET_SMDKV310
- select SUPPORT_SPL
bool "Exynos4210 SMDKV310 board"
select OF_CONTROL
+ select SUPPORT_SPL
config TARGET_TRATS
bool "Exynos4210 Trats board"
select ARM_ERRATA_774769
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL
config TARGET_SMDK5250
bool "SMDK5250 board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL
config TARGET_SNOW
bool "Snow board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL
config TARGET_SPRING
bool "Spring board"
- select SUPPORT_SPL
select OF_CONTROL
select SPL_DISABLE_OF_CONTROL
+ select SUPPORT_SPL
config TARGET_SMDK5420
bool "SMDK5420 board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL
config TARGET_PEACH_PI
bool "Peach Pi board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL
config TARGET_PEACH_PIT
bool "Peach Pit board"
- select SUPPORT_SPL
select OF_CONTROL
+ select SUPPORT_SPL
endchoice
endif
bool "ESPRESSO7420 board"
select ARM64
select ARMV8_MULTIENTRY
- select SUPPORT_SPL
+ select CLK_EXYNOS
select OF_CONTROL
- select SPL_DISABLE_OF_CONTROL
select PINCTRL
select PINCTRL_EXYNOS7420
- select CLK_EXYNOS
+ select SPL_DISABLE_OF_CONTROL
+ select SUPPORT_SPL
endchoice
endif
config TARGET_MX31PDK
bool "Support the i.MX31 PDK board from Freescale/NXP"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
endchoice
config ARMADA_32BIT
bool
+ select ARCH_MISC_INIT
+ select BOARD_EARLY_INIT_F
select CPU_V7A
- select SUPPORT_SPL
select SPL_DM
select SPL_DM_SEQ_ALIAS
select SPL_OF_CONTROL
select SPL_SIMPLE_BUS
- select BOARD_EARLY_INIT_F
- select ARCH_MISC_INIT
+ select SUPPORT_SPL
config ARMADA_64BIT
bool
config OMAP34XX
bool "OMAP34XX SoC"
+ select ARM_CORTEX_A8_CVE_2017_5715
select ARM_ERRATA_430973
select ARM_ERRATA_454179
select ARM_ERRATA_621766
select ARM_ERRATA_725233
- select ARM_CORTEX_A8_CVE_2017_5715
select USE_TINY_PRINTF
imply NAND_OMAP_GPMC
imply SPL_EXT_SUPPORT
config OMAP54XX
bool "OMAP54XX SoC"
+ select ARM_CORTEX_A15_CVE_2017_5715
select ARM_ERRATA_798870
select SYS_THUMB_BUILD
- select ARM_CORTEX_A15_CVE_2017_5715
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
imply SPL_DISPLAY_PRINT
config AM33XX
bool "AM33XX SoC"
- select SPECIFY_CONSOLE_INDEX
select ARM_CORTEX_A8_CVE_2017_5715
+ select SPECIFY_CONSOLE_INDEX
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
imply SPL_NAND_AM33XX_BCH
bool "TI DRA7XX"
select BOARD_LATE_INIT
select DRA7XX
- select TI_I2C_BOARD_DETECT
select PHYS_64BIT
- imply SCSI
+ select TI_I2C_BOARD_DETECT
imply DM_PMIC
- imply PMIC_LP87565
imply DM_REGULATOR
imply DM_REGULATOR_LP87565
- imply SPL_THERMAL
imply DM_THERMAL
+ imply PMIC_LP87565
+ imply SCSI
+ imply SPL_THERMAL
imply TI_DRA7_THERMAL
config TARGET_AM57XX_EVM
bool "AM57XX"
select BOARD_LATE_INIT
+ select CMD_DDR3
select DRA7XX
select TI_I2C_BOARD_DETECT
- select CMD_DDR3
+ imply DM_THERMAL
imply SCSI
imply SPL_THERMAL
- imply DM_THERMAL
imply TI_DRA7_THERMAL
endchoice
config TARGET_QEMU_ARM_32BIT
bool "Support qemu_arm"
depends on ARCH_QEMU
- select CPU_V7A
select ARCH_SUPPORT_PSCI
+ select CPU_V7A
select SYS_ARCH_TIMER
config TARGET_QEMU_ARM_64BIT
config TARGET_VYASA_RK3288
bool "Vyasa-RK3288"
select BOARD_LATE_INIT
- select TPL
+ select ROCKCHIP_BROM_HELPER
select SUPPORT_TPL
- select TPL_DM
- select TPL_REGMAP
- select TPL_SYSCON
- select TPL_CLK
- select TPL_RAM
- select TPL_OF_PLATDATA
- select TPL_OF_CONTROL
+ select TPL
select TPL_BOOTROM_SUPPORT
- select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
- select ROCKCHIP_BROM_HELPER
+ select TPL_CLK
+ select TPL_DM
select TPL_DRIVERS_MISC_SUPPORT
select TPL_LIBCOMMON_SUPPORT
select TPL_LIBGENERIC_SUPPORT
+ select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
+ select TPL_OF_CONTROL
+ select TPL_OF_PLATDATA
+ select TPL_RAM
+ select TPL_REGMAP
select TPL_SERIAL_SUPPORT
+ select TPL_SYSCON
help
Vyasa is a RK3288-based development board with 2 USB ports,
HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet, It
config TARGET_SOCFPGA_ARRIA10
bool
- select SPL_BOARD_INIT if SPL
select ALTERA_SDRAM
+ select SPL_BOARD_INIT if SPL
config TARGET_SOCFPGA_CYCLONE5
bool
config TARGET_SOCFPGA_STRATIX10
bool
select ARMV8_MULTIENTRY
- select ARMV8_SPIN_TABLE
select ARMV8_SET_SMPEN
+ select ARMV8_SPIN_TABLE
choice
prompt "Altera SOCFPGA board select"
select PINCTRL
select PINCTRL_STM32
select RAM
- select STM32_SDRAM
select STM32_RCC
select STM32_RESET
+ select STM32_SDRAM
select STM32_SERIAL
select STM32_TIMER
select TIMER
select PINCTRL
select PINCTRL_STM32
select RAM
- select STM32_SDRAM
- select STM32_RCC
- select STM32_RESET
- select STM32_SERIAL
- select STM32_TIMER
- select TIMER
- select SUPPORT_SPL
select SPL
select SPL_BOARD_INIT
select SPL_CLK
select SPL_OF_CONTROL
select SPL_OF_LIBFDT
select SPL_OF_TRANSLATE
- imply SPL_OS_BOOT
select SPL_PINCTRL
select SPL_RAM
select SPL_SERIAL_SUPPORT
select SPL_SYS_MALLOC_SIMPLE
select SPL_TIMER
select SPL_XIP_SUPPORT
+ select STM32_RCC
+ select STM32_RESET
+ select STM32_SDRAM
+ select STM32_SERIAL
+ select STM32_TIMER
+ select SUPPORT_SPL
+ select TIMER
+ imply SPL_OS_BOOT
config STM32H7
bool "stm32h7 family"
select PINCTRL_STM32
select RAM
select REGMAP
- select STM32_SDRAM
select STM32_RCC
select STM32_RESET
+ select STM32_SDRAM
select STM32_SERIAL
select STM32_TIMER
select SYSCON
config TARGET_APALIS_TK1
bool "Toradex Apalis TK1 module"
+ select ARCH_SUPPORT_PSCI
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select ARCH_SUPPORT_PSCI
config TARGET_JETSON_TK1
bool "NVIDIA Tegra124 Jetson TK1 board"
+ select ARCH_SUPPORT_PSCI
select BOARD_LATE_INIT
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
- select ARCH_SUPPORT_PSCI
config TARGET_CEI_TK1_SOM
bool "Colorado Engineering Inc Tegra124 TK1-som board"
config ARCH_UNIPHIER_32BIT
bool
+ select ARCH_SUPPORT_PSCI
+ select ARMV7_NONSEC
select CPU_V7A
select CPU_V7_HAS_NONSEC
- select ARMV7_NONSEC
- select ARCH_SUPPORT_PSCI
choice
prompt "UniPhier SoC select"
bool "Enable UniPhier LD20 SoC support"
depends on ARCH_UNIPHIER_V8_MULTI
default y
+ select OF_BOARD_SETUP
config ARCH_UNIPHIER_PXS3
bool "Enable UniPhier PXs3 SoC support"
config CACHE_UNIPHIER
bool "Enable the UniPhier L2 cache controller"
depends on ARCH_UNIPHIER_32BIT
- select SYS_CACHE_SHIFT_7
default y
+ select SYS_CACHE_SHIFT_7
help
This option allows to use the UniPhier System Cache as L2 cache.
config SOC_AR933X
bool
+ select MIPS_TUNE_24KC
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_24KC
help
This supports QCA/Atheros ar933x family SOCs.
config SOC_AR934X
bool
+ select MIPS_TUNE_74KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
- select MIPS_TUNE_74KC
help
This supports QCA/Atheros ar934x family SOCs.
config SOC_QCA953X
bool
+ select MIPS_TUNE_24KC
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_24KC
help
This supports QCA/Atheros qca953x family SOCs.
config SOC_BMIPS_BCM3380
bool "BMIPS BCM3380 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_WATCHDOG
help
config SOC_BMIPS_BCM6318
bool "BMIPS BCM6318 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
config SOC_BMIPS_BCM6328
bool "BMIPS BCM6328 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
config SOC_BMIPS_BCM6338
bool "BMIPS BCM6338 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
config SOC_BMIPS_BCM6348
bool "BMIPS BCM6348 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_WATCHDOG
help
config SOC_BMIPS_BCM6358
bool "BMIPS BCM6358 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
config SOC_BMIPS_BCM6368
bool "BMIPS BCM6368 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
config SOC_BMIPS_BCM6362
bool "BMIPS BCM6362 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
config SOC_BMIPS_BCM63268
bool "BMIPS BCM63268 family"
+ select MIPS_L1_CACHE_SHIFT_4
+ select MIPS_TUNE_4KC
select SUPPORTS_BIG_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
- select MIPS_TUNE_4KC
- select MIPS_L1_CACHE_SHIFT_4
select SWAP_IO_SPACE
select SYSRESET_SYSCON
help
config SOC_PIC32MZDA
bool "Microchip PIC32MZ[DA] family"
- select SUPPORTS_LITTLE_ENDIAN
+ select MIPS_L1_CACHE_SHIFT_4
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
- select MIPS_L1_CACHE_SHIFT_4
+ select SUPPORTS_LITTLE_ENDIAN
select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS
help
This supports Microchip PIC32MZ[DA] family of microcontrollers.
select CREATE_ARCH_SYMLINK
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
- imply USB_EHCI_HCD if USB
imply CMD_HASH
imply CMD_IRQ
+ imply USB_EHCI_HCD if USB
config MPC86xx
bool "MPC86xx"
projects / platform / kernel / u-boot.git / commitdiff