/*
* PXA Chip selects
*/
+#ifdef CONFIG_CPU_MONAHANS
+#define PXA_CS0_PHYS 0x00000000 /* for both small and large same start */
+#define PXA_CS1_PHYS 0x04000000 /* Small partition start address (64MB) */
+#define PXA_CS1_LPHYS 0x30000000 /* Large partition start address (256MB) */
+#define PXA_CS2_PHYS 0x10000000 /* (64MB) */
+#define PXA_CS3_PHYS 0x14000000 /* (64MB) */
+#define PXA_PCMCIA_PHYS 0x20000000 /* (256MB) */
+#else
#define PXA_CS0_PHYS 0x00000000
#define PXA_CS1_PHYS 0x04000000
#define PXA_CS2_PHYS 0x08000000
#define PXA_CS3_PHYS 0x0C000000
#define PXA_CS4_PHYS 0x10000000
#define PXA_CS5_PHYS 0x14000000
+#endif /* CONFIG_CPU_MONAHANS */
/*
* Personal Computer Memory Card International Association (PCMCIA) sockets
#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */
#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+#endif
#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
+#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */
#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
+#endif
/*
* DMA Controller
#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
+#ifdef CONFIG_CPU_MONAHANS
+#define DCSR16 __REG(0x40000040) /* DMA Control / Status Register for Channel 16 */
+#define DCSR17 __REG(0x40000044) /* DMA Control / Status Register for Channel 17 */
+#define DCSR18 __REG(0x40000048) /* DMA Control / Status Register for Channel 18 */
+#define DCSR19 __REG(0x4000004c) /* DMA Control / Status Register for Channel 19 */
+#define DCSR20 __REG(0x40000050) /* DMA Control / Status Register for Channel 20 */
+#define DCSR21 __REG(0x40000054) /* DMA Control / Status Register for Channel 21 */
+#define DCSR22 __REG(0x40000058) /* DMA Control / Status Register for Channel 22 */
+#define DCSR23 __REG(0x4000005c) /* DMA Control / Status Register for Channel 23 */
+#define DCSR24 __REG(0x40000060) /* DMA Control / Status Register for Channel 24 */
+#define DCSR25 __REG(0x40000064) /* DMA Control / Status Register for Channel 25 */
+#define DCSR26 __REG(0x40000068) /* DMA Control / Status Register for Channel 26 */
+#define DCSR27 __REG(0x4000006c) /* DMA Control / Status Register for Channel 27 */
+#define DCSR28 __REG(0x40000070) /* DMA Control / Status Register for Channel 28 */
+#define DCSR29 __REG(0x40000074) /* DMA Control / Status Register for Channel 29 */
+#define DCSR30 __REG(0x40000078) /* DMA Control / Status Register for Channel 30 */
+#define DCSR31 __REG(0x4000007c) /* DMA Control / Status Register for Channel 31 */
+#endif /* CONFIG_CPU_MONAHANS */
#define DCSR(x) __REG2(0x40000000, (x) << 2)
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS)
#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
/*
* OS Timer & Match Registers
*/
-#define OSMR0 __REG(0x40A00000) /* */
-#define OSMR1 __REG(0x40A00004) /* */
-#define OSMR2 __REG(0x40A00008) /* */
-#define OSMR3 __REG(0x40A0000C) /* */
+#define OSMR0 __REG(0x40A00000) /* OS Timer Match Register 0 */
+#define OSMR1 __REG(0x40A00004) /* OS Timer Match Register 1 */
+#define OSMR2 __REG(0x40A00008) /* OS Timer Match Register 2 */
+#define OSMR3 __REG(0x40A0000C) /* OS Timer Match Register 3 */
#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+#ifdef CONFIG_CPU_MONAHANS
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register 4 */
+#define OSCR5 __REG(0x40A00044) /* OS Timer Counter Register 5 */
+#define OSCR6 __REG(0x40A00048) /* OS Timer Counter Register 6 */
+#define OSCR7 __REG(0x40A0004C) /* OS Timer Counter Register 7 */
+#define OSCR8 __REG(0x40A00050) /* OS Timer Counter Register 8 */
+#define OSCR9 __REG(0x40A00054) /* OS Timer Counter Register 9 */
+#define OSCR10 __REG(0x40A00058) /* OS Timer Counter Register 10 */
+#define OSCR11 __REG(0x40A0005C) /* OS Timer Counter Register 11 */
+
+#define OSMR4 __REG(0x40A00080) /* OS Timer Match Register 4 */
+#define OSMR5 __REG(0x40A00084) /* OS Timer Match Register 5 */
+#define OSMR6 __REG(0x40A00088) /* OS Timer Match Register 6 */
+#define OSMR7 __REG(0x40A0008C) /* OS Timer Match Register 7 */
+#define OSMR8 __REG(0x40A00090) /* OS Timer Match Register 8 */
+#define OSMR9 __REG(0x40A00094) /* OS Timer Match Register 9 */
+#define OSMR10 __REG(0x40A00098) /* OS Timer Match Register 10 */
+#define OSMR11 __REG(0x40A0009C) /* OS Timer Match Register 11 */
+
+#define OMCR4 __REG(0x40A000C0) /* OS Match Control Register 4 */
+#define OMCR5 __REG(0x40A000C4) /* OS Match Control Register 5 */
+#define OMCR6 __REG(0x40A000C8) /* OS Match Control Register 6 */
+#define OMCR7 __REG(0x40A000CC) /* OS Match Control Register 7 */
+#define OMCR8 __REG(0x40A000D0) /* OS Match Control Register 8 */
+#define OMCR9 __REG(0x40A000D4) /* OS Match Control Register 9 */
+#define OMCR10 __REG(0x40A000D8) /* OS Match Control Register 10 */
+#define OMCR11 __REG(0x40A000DC) /* OS Match Control Register 11 */
+#endif /* CONFIG_CPU_MONAHANS */
+
+#define OSSR_M4 (1 << 4) /* Match status channel 4 */
#define OSSR_M3 (1 << 3) /* Match status channel 3 */
#define OSSR_M2 (1 << 2) /* Match status channel 2 */
#define OSSR_M1 (1 << 1) /* Match status channel 1 */
#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+#define OIER_E4 (1 << 4) /* Interrupt enable channel 4 */
#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+#ifdef CONFIG_CPU_MONAHANS
+#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
+/* Missing: 32 Interrupt priority registers */
+/* mk@tbd: These are the same as beneath for PXA27x: maybe can be
+ * merged if GPIO Stuff is same too. */
+#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
+#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
+#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
+/* Missing: 2 Interrupt priority registers */
+#endif /* CONFIG_CPU_MONAHANS */
+
/*
* General Purpose I/O
*/
/*
* Power Manager
*/
+#ifdef CONFIG_CPU_MONAHANS
+
+#define ASCR __REG(0x40F40000) /* Application Subsystem Power Status/Control Register */
+#define ARSR __REG(0x40F40004) /* Application Subsystem Reset Status Register */
+#define AD3ER __REG(0x40F40008) /* Application Subsystem D3 state Wakeup Enable Register */
+#define AD3SR __REG(0x40F4000C) /* Application Subsystem D3 state Wakeup Status Register */
+#define AD2D0ER __REG(0x40F40010) /* Application Subsystem D2 to D0 state Wakeup Enable Register */
+#define AD2D0SR __REG(0x40F40014) /* Application Subsystem D2 to D0 state Wakeup Status Register */
+#define AD2D1ER __REG(0x40F40018) /* Application Subsystem D2 to D1 state Wakeup Enable Register */
+#define AD2D1SR __REG(0x40F4001C) /* Application Subsystem D2 to D1 state Wakeup Status Register */
+#define AD1D0ER __REG(0x40F40020) /* Application Subsystem D1 to D0 state Wakeup Enable Register */
+#define AD1D0SR __REG(0x40F40024) /* Application Subsystem D1 to D0 state Wakeup Status Register */
+#define ASDCNT __REG(0x40F40028) /* Application Subsystem SRAM Drowsy Count Register */
+#define AD3R __REG(0x40F40030) /* Application Subsystem D3 State Configuration Register */
+#define AD2R __REG(0x40F40034) /* Application Subsystem D2 State Configuration Register */
+#define AD1R __REG(0x40F40038) /* Application Subsystem D1 State Configuration Register */
+
+#define PMCR __REG(0x40F50000) /* Power Manager Control Register */
+#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */
+#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */
+#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */
+#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */
+#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */
+#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */
+#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */
+#define PCMD(x) __REG(0x40F50110 + x*4)
+#define PCMD0 __REG(0x40F50110 + 0 * 4)
+#define PCMD1 __REG(0x40F50110 + 1 * 4)
+#define PCMD2 __REG(0x40F50110 + 2 * 4)
+#define PCMD3 __REG(0x40F50110 + 3 * 4)
+#define PCMD4 __REG(0x40F50110 + 4 * 4)
+#define PCMD5 __REG(0x40F50110 + 5 * 4)
+#define PCMD6 __REG(0x40F50110 + 6 * 4)
+#define PCMD7 __REG(0x40F50110 + 7 * 4)
+#define PCMD8 __REG(0x40F50110 + 8 * 4)
+#define PCMD9 __REG(0x40F50110 + 9 * 4)
+#define PCMD10 __REG(0x40F50110 + 10 * 4)
+#define PCMD11 __REG(0x40F50110 + 11 * 4)
+#define PCMD12 __REG(0x40F50110 + 12 * 4)
+#define PCMD13 __REG(0x40F50110 + 13 * 4)
+#define PCMD14 __REG(0x40F50110 + 14 * 4)
+#define PCMD15 __REG(0x40F50110 + 15 * 4)
+#define PCMD16 __REG(0x40F50110 + 16 * 4)
+#define PCMD17 __REG(0x40F50110 + 17 * 4)
+#define PCMD18 __REG(0x40F50110 + 18 * 4)
+#define PCMD19 __REG(0x40F50110 + 19 * 4)
+#define PCMD20 __REG(0x40F50110 + 20 * 4)
+#define PCMD21 __REG(0x40F50110 + 21 * 4)
+#define PCMD22 __REG(0x40F50110 + 22 * 4)
+#define PCMD23 __REG(0x40F50110 + 23 * 4)
+#define PCMD24 __REG(0x40F50110 + 24 * 4)
+#define PCMD25 __REG(0x40F50110 + 25 * 4)
+#define PCMD26 __REG(0x40F50110 + 26 * 4)
+#define PCMD27 __REG(0x40F50110 + 27 * 4)
+#define PCMD28 __REG(0x40F50110 + 28 * 4)
+#define PCMD29 __REG(0x40F50110 + 29 * 4)
+#define PCMD30 __REG(0x40F50110 + 30 * 4)
+#define PCMD31 __REG(0x40F50110 + 31 * 4)
+
+#define PCMD_MBC (1<<12)
+#define PCMD_DCE (1<<11)
+#define PCMD_LC (1<<10)
+#define PCMD_SQC (3<<8) /* only 00 and 01 are valid */
+
+#define PVCR_FVC (0x1 << 28)
+#define PVCR_VCSA (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PVCR_ReadPointer (0x01f00000)
+#define PVCR_SlaveAddress (0x7f)
+
+#else /* ifdef CONFIG_CPU_MONAHANS */
+
#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
#define RCSR_WDR (1 << 1) /* Watchdog Reset */
#define RCSR_HWR (1 << 0) /* Hardware Reset */
+#endif /* CONFIG_CPU_MONAHANS */
+
/*
* SSP Serial Port Registers
*/
/*
* Core Clock
*/
+
+#if defined(CONFIG_CPU_MONAHANS)
+#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */
+#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */
+#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA __REG(0x4134000C) /* A Clock Enable Register */
+#define CKENB __REG(0x41340010) /* B Clock Enable Register */
+#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
+
+#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */
+#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */
+#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */
+#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */
+#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */
+#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */
+#define ACCR_XPDIS (1 << 31)
+#define ACCR_SPDIS (1 << 30)
+#define ACCR_13MEND1 (1 << 27)
+#define ACCR_D0CS (1 << 26)
+#define ACCR_13MEND2 (1 << 21)
+#define ACCR_PCCE (1 << 11)
+
+#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
+#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
+#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
+#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
+#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */
+#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */
+#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */
+#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */
+#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */
+#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */
+#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */
+#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
+#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
+#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
+#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
+#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
+#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
+#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
+#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
+#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
+#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
+#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
+#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
+#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */
+#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
+#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
+#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */
+#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */
+
+#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
+#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */
+#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */
+#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */
+#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */
+#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */
+
+#else /* if defined CONFIG_CPU_MONAHANS */
+
#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
#define CKEN __REG(0x41300004) /* Clock Enable Register */
#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
#define CCCR_N30 (0x6 << 7)
#endif
+#endif /* CONFIG_CPU_MONAHANS */
+
/*
* LCD
*/
/*
* Memory controller
*/
+
+#ifdef CONFIG_CPU_MONAHANS
+/* Static Memory Controller Registers */
+#define MSC0 __REG_2(0x4A000008) /* Static Memory Control Register 0 */
+#define MSC1 __REG_2(0x4A00000C) /* Static Memory Control Register 1 */
+#define MECR __REG_2(0x4A000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXCNFG __REG_2(0x4A00001C) /* Synchronous Static Memory Control Register */
+#define MCMEM0 __REG_2(0x4A000028) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCATT0 __REG_2(0x4A000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCIO0 __REG_2(0x4A000038) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MEMCLKCFG __REG_2(0x4A000068) /* SCLK speed configuration */
+#define CSADRCFG0 __REG_2(0x4A000080) /* Address Configuration for chip select 0 */
+#define CSADRCFG1 __REG_2(0x4A000084) /* Address Configuration for chip select 1 */
+#define CSADRCFG2 __REG_2(0x4A000088) /* Address Configuration for chip select 2 */
+#define CSADRCFG3 __REG_2(0x4A00008C) /* Address Configuration for chip select 3 */
+#define CSADRCFG_P __REG_2(0x4A000090) /* Address Configuration for pcmcia card interface */
+#define CSMSADRCFG __REG_2(0x4A0000A0) /* Master Address Configuration Register */
+#define CLK_RET_DEL __REG_2(0x4A0000B0) /* Delay line and mux selects for return data latching for sync. flash */
+#define ADV_RET_DEL __REG_2(0x4A0000B4) /* Delay line and mux selects for return data latching for sync. flash */
+
+/* Dynamic Memory Controller Registers */
+#define MDCNFG __REG_2(0x48100000) /* SDRAM Configuration Register 0 */
+#define MDREFR __REG_2(0x48100004) /* SDRAM Refresh Control Register */
+#define FLYCNFG __REG_2(0x48100020) /* Fly-by DMA DVAL[1:0] polarities */
+#define MDMRS __REG_2(0x48100040) /* MRS value to be written to SDRAM */
+#define DDR_SCAL __REG_2(0x48100050) /* Software Delay Line Calibration/Configuration for external DDR memory. */
+#define DDR_HCAL __REG_2(0x48100060) /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
+#define DDR_WCAL __REG_2(0x48100068) /* DDR Write Strobe Calibration Register */
+#define DMCIER __REG_2(0x48100070) /* Dynamic MC Interrupt Enable Register. */
+#define DMCISR __REG_2(0x48100078) /* Dynamic MC Interrupt Status Register. */
+#define DDR_DLS __REG_2(0x48100080) /* DDR Delay Line Value Status register for external DDR memory. */
+#define EMPI __REG_2(0x48100090) /* EMPI Control Register */
+#define RCOMP __REG_2(0x48100100)
+#define PAD_MA __REG_2(0x48100110)
+#define PAD_MDMSB __REG_2(0x48100114)
+#define PAD_MDLSB __REG_2(0x48100118)
+#define PAD_DMEM __REG_2(0x4810011c)
+#define PAD_SDCLK __REG_2(0x48100120)
+#define PAD_SDCS __REG_2(0x48100124)
+#define PAD_SMEM __REG_2(0x48100128)
+#define PAD_SCLK __REG_2(0x4810012C)
+#define TAI __REG_2(0x48100F00) /* TAI Tavor Address Isolation Register */
+
+
+/* Data Flash Controller Registers */
+
+#define NDCR __REG_2(0x43100000) /* Data Flash Control register */
+#define NDTR0CS0 __REG_2(0x43100004) /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
+#define NDTR0CS1 __REG_2(0x43100008) /* Data Controller Timing Parameter 0 Register for ND_nCS1 */
+#define NDTR1CS0 __REG_2(0x4310000C) /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
+#define NDTR1CS1 __REG_2(0x43100010) /* Data Controller Timing Parameter 1 Register for ND_nCS1 */
+#define NDSR __REG_2(0x43100014) /* Data Controller Status Register */
+#define NDPCR __REG_2(0x43100018) /* Data Controller Page Count Register */
+#define NDBDR0 __REG_2(0x4310001C) /* Data Controller Bad Block Register 0 */
+#define NDBDR1 __REG_2(0x43100020) /* Data Controller Bad Block Register 1 */
+#define NDDB __REG_2(0x43100040) /* Data Controller Data Buffer */
+#define NDCB0 __REG_2(0x43100048) /* Data Controller Command Buffer0 */
+#define NDCB1 __REG_2(0x4310004C) /* Data Controller Command Buffer1 */
+#define NDCB2 __REG_2(0x43100050) /* Data Controller Command Buffer2 */
+
+#define NDCR_SPARE_EN (0x1<<31)
+#define NDCR_ECC_EN (0x1<<30)
+#define NDCR_DMA_EN (0x1<<29)
+#define NDCR_ND_RUN (0x1<<28)
+#define NDCR_DWIDTH_C (0x1<<27)
+#define NDCR_DWIDTH_M (0x1<<26)
+#define NDCR_PAGE_SZ (0x3<<24)
+#define NDCR_NCSX (0x1<<23)
+#define NDCR_ND_MODE (0x3<<21)
+#define NDCR_NAND_MODE 0x0
+#define NDCR_CLR_PG_CNT (0x1<<20)
+#define NDCR_CLR_ECC (0x1<<19)
+#define NDCR_RD_ID_CNT (0x7<<16)
+#define NDCR_RA_START (0x1<<15)
+#define NDCR_PG_PER_BLK (0x1<<14)
+#define NDCR_ND_ARB_EN (0x1<<12)
+
+#define NDSR_RDY (0x1<<11)
+#define NDSR_CS0_PAGED (0x1<<10)
+#define NDSR_CS1_PAGED (0x1<<9)
+#define NDSR_CS0_CMDD (0x1<<8)
+#define NDSR_CS1_CMDD (0x1<<7)
+#define NDSR_CS0_BBD (0x1<<6)
+#define NDSR_CS1_BBD (0x1<<5)
+#define NDSR_BDERR (0x1<<4)
+#define NDSR_SBERR (0x1<<3)
+#define NDSR_WRDREQ (0x1<<2)
+#define NDSR_RDDREQ (0x1<<1)
+#define NDSR_WRCMDREQ (0x1)
+
+#define NDCB0_AUTO_RS (0x1<<25)
+#define NDCB0_CSEL (0x1<<24)
+#define NDCB0_CMD_TYPE (0x7<<21)
+#define NDCB0_NC (0x1<<20)
+#define NDCB0_DBC (0x1<<19)
+#define NDCB0_ADDR_CYC (0x7<<16)
+#define NDCB0_CMD2 (0xff<<8)
+#define NDCB0_CMD1 (0xff)
+#define MCMEM(s) MCMEM0
+#define MCATT(s) MCATT0
+#define MCIO(s) MCIO0
+#define MECR_CIT (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#else /* CONFIG_CPU_MONAHANS */
+
#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */
#define MDCNFG_OFFSET 0x0
#define MDREFR_OFFSET 0x4
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+#endif /* CONFIG_CPU_MONAHANS */
+
/* Interrupt Controller */
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
projects / platform / kernel / u-boot.git / commitdiff