u32 v = 0;
u32 pretbtt = 0;
- v |= ar->hw->conf.beacon_int;
-
if (ar->vif) {
+ v |= ar->vif->bss_conf.beacon_int;
+
switch (ar->vif->type) {
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_ADHOC:
break;
case NL80211_IFTYPE_AP:
v |= BIT(24);
- pretbtt = (ar->hw->conf.beacon_int - 6) << 16;
+ pretbtt = (ar->vif->bss_conf.beacon_int - 6) << 16;
break;
default:
break;
goto out;
}
- if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) {
+ if (changed & BSS_CHANGED_BEACON_INT) {
err = ar9170_set_beacon_timers(ar);
if (err)
goto out;
#endif /* CONFIG_AR9170_LEDS */
}
+ if (changed & BSS_CHANGED_BEACON_INT)
+ err = ar9170_set_beacon_timers(ar);
+
if (changed & BSS_CHANGED_HT) {
/* TODO */
err = 0;
mutex_lock(&sc->lock);
- sc->bintval = conf->beacon_int;
sc->power_level = conf->power_level;
ret = ath5k_chan_set(sc, conf->channel);
u32 changes)
{
struct ath5k_softc *sc = hw->priv;
+
+ if (changes & BSS_CHANGED_BEACON_INT)
+ sc->bintval = bss_conf->beacon_int;
+
if (changes & BSS_CHANGED_ASSOC) {
mutex_lock(&sc->lock);
sc->assoc = bss_conf->assoc;
int led_on_cnt;
int led_off_cnt;
+ int beacon_interval;
+
struct ath_rfkill rf_kill;
struct ath_ani ani;
struct ath9k_node_stats nodestats;
u64 tsfadjust;
int intval;
- intval = sc->hw->conf.beacon_int ?
- sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+ intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
/*
* Calculate the TSF offset for this beacon slot, i.e., the
* on the tsf to safeguard against missing an swba.
*/
- intval = sc->hw->conf.beacon_int ?
- sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+ intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
tsf = ath9k_hw_gettsf64(ah);
tsftu = TSF_TO_TU(tsf>>32, tsf);
/* Setup the beacon configuration parameters */
memset(&conf, 0, sizeof(struct ath_beacon_config));
- conf.beacon_interval = sc->hw->conf.beacon_int ?
- sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+ conf.beacon_interval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
conf.listen_interval = 1;
conf.dtim_period = conf.beacon_interval;
conf.dtim_count = 1;
if (changed & IEEE80211_CONF_CHANGE_POWER)
sc->config.txpowlimit = 2 * conf->power_level;
- /*
- * The HW TSF has to be reset when the beacon interval changes.
- * We set the flag here, and ath_beacon_config_ap() would take this
- * into account when it gets called through the subsequent
- * config_interface() call - with IFCC_BEACON in the changed field.
- */
-
- if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
- sc->sc_flags |= SC_OP_TSF_RESET;
-
mutex_unlock(&sc->mutex);
return 0;
ath9k_bss_assoc_info(sc, vif, bss_conf);
}
+ /*
+ * The HW TSF has to be reset when the beacon interval changes.
+ * We set the flag here, and ath_beacon_config_ap() would take this
+ * into account when it gets called through the subsequent
+ * config_interface() call - with IFCC_BEACON in the changed field.
+ */
+
+ if (changed & BSS_CHANGED_BEACON_INT) {
+ sc->sc_flags |= SC_OP_TSF_RESET;
+ sc->beacon_interval = bss_conf->beacon_int;
+ }
+
mutex_unlock(&sc->mutex);
}
else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
- qi.tqi_readyTime = (sc->hw->conf.beacon_int *
+ qi.tqi_readyTime = (sc->beacon_interval *
sc->config.cabqReadytime) / 100;
ath_txq_update(sc, qnum, &qi);
if (phy->ops->set_rx_antenna)
phy->ops->set_rx_antenna(dev, antenna);
- /* Update templates for AP/mesh mode. */
- if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
- b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
- b43_set_beacon_int(dev, conf->beacon_int);
-
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
goto out_unlock_mutex;
b43_mac_suspend(dev);
+ /* Update templates for AP/mesh mode. */
+ if (changed & BSS_CHANGED_BEACON_INT &&
+ (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
+ b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+ b43_set_beacon_int(dev, conf->beacon_int);
+
if (changed & BSS_CHANGED_BASIC_RATES)
b43_update_basic_rates(dev, conf->basic_rates);
/* Antennas for RX and management frame TX. */
b43legacy_mgmtframe_txantenna(dev, antenna_tx);
- /* Update templates for AP mode. */
- if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
- b43legacy_set_beacon_int(dev, conf->beacon_int);
-
-
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
b43legacy_radio_turn_on(dev);
b43legacy_mac_suspend(dev);
+ if (changed & BSS_CHANGED_BEACON_INT &&
+ (b43legacy_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+ b43legacy_set_beacon_int(dev, conf->beacon_int);
+
if (changed & BSS_CHANGED_BASIC_RATES)
b43legacy_update_basic_rates(dev, conf->basic_rates);
beacon_int = iwl_adjust_beacon_interval(priv->beacon_int);
priv->rxon_timing.atim_window = 0;
} else {
- beacon_int = iwl_adjust_beacon_interval(conf->beacon_int);
+ beacon_int = iwl_adjust_beacon_interval(
+ priv->vif->bss_conf.beacon_int);
/* TODO: we need to get atim_window from upper stack
* for now we set to 0 */
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
- hw->conf.beacon_int = 100;
hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->ibss_beacon = NULL;
- priv->beacon_int = priv->hw->conf.beacon_int;
+ priv->beacon_int = priv->vif->bss_conf.beacon_int;
priv->timestamp = 0;
if ((priv->iw_mode == NL80211_IFTYPE_STATION))
priv->beacon_int = 0;
priv->rxon_timing.atim_window = 0;
} else {
priv->rxon_timing.beacon_interval =
- iwl3945_adjust_beacon_interval(conf->beacon_int);
+ iwl3945_adjust_beacon_interval(
+ priv->vif->bss_conf.beacon_int);
/* TODO: we need to get atim_window from upper stack
* for now we set to 0 */
priv->rxon_timing.atim_window = 0;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
- hw->conf.beacon_int = 100;
-
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&priv->bands[IEEE80211_BAND_2GHZ];
if (beacon) {
lbtf_beacon_set(priv, beacon);
kfree_skb(beacon);
- lbtf_beacon_ctrl(priv, 1, hw->conf.beacon_int);
+ lbtf_beacon_ctrl(priv, 1, vif->bss_conf.beacon_int);
}
break;
default:
struct mac80211_hwsim_data *data = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
- printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d beacon_int=%d)\n",
+ printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d)\n",
wiphy_name(hw->wiphy), __func__,
- conf->channel->center_freq, conf->radio_enabled,
- conf->beacon_int);
+ conf->channel->center_freq, conf->radio_enabled);
data->channel = conf->channel;
data->radio_enabled = conf->radio_enabled;
- data->beacon_int = 1024 * conf->beacon_int / 1000 * HZ / 1000;
- if (data->beacon_int < 1)
- data->beacon_int = 1;
-
- if (!data->started || !data->radio_enabled)
+ if (!data->started || !data->radio_enabled || !data->beacon_int)
del_timer(&data->beacon_timer);
else
mod_timer(&data->beacon_timer, jiffies + data->beacon_int);
u32 changed)
{
struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
+ struct mac80211_hwsim_data *data = hw->priv;
hwsim_check_magic(vif);
vp->aid = info->aid;
}
+ if (changed & BSS_CHANGED_BEACON_INT) {
+ printk(KERN_DEBUG " %s: BCNINT: %d\n",
+ wiphy_name(hw->wiphy), info->beacon_int);
+ data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000;
+ if (WARN_ON(data->beacon_int))
+ data->beacon_int = 1;
+ }
+
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
printk(KERN_DEBUG " %s: ERP_CTS_PROT: %d\n",
wiphy_name(hw->wiphy), info->use_cts_prot);
* @BSS_CHANGED_ERP_SLOT: slot timing changed
* @BSS_CHANGED_HT: 802.11n parameters changed
* @BSS_CHANGED_BASIC_RATES: Basic rateset changed
+ * @BSS_CHANGED_BEACON_INT: Beacon interval changed
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
BSS_CHANGED_ERP_SLOT = 1<<3,
BSS_CHANGED_HT = 1<<4,
BSS_CHANGED_BASIC_RATES = 1<<5,
+ BSS_CHANGED_BEACON_INT = 1<<6,
};
/**
* enum ieee80211_conf_changed - denotes which configuration changed
*
* @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed
- * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
+ * @_IEEE80211_CONF_CHANGE_BEACON_INTERVAL: DEPRECATED
* @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
* @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
* @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
*/
enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
- IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
+ _IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
};
+static inline __deprecated enum ieee80211_conf_changed
+__IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void)
+{
+ return _IEEE80211_CONF_CHANGE_BEACON_INTERVAL;
+}
+#define IEEE80211_CONF_CHANGE_BEACON_INTERVAL \
+ __IEEE80211_CONF_CHANGE_BEACON_INTERVAL()
+
/**
* struct ieee80211_conf - configuration of the device
*
* This is a kludge. beacon interval should really be part
* of the beacon information.
*/
- if (params->interval && (sdata->local->hw.conf.beacon_int !=
- params->interval)) {
- sdata->local->hw.conf.beacon_int = params->interval;
- err = ieee80211_hw_config(sdata->local,
- IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
- if (err < 0)
- return err;
- /*
- * We updated some parameter so if below bails out
- * it's not an error.
- */
- err = 0;
+ if (params->interval &&
+ (sdata->vif.bss_conf.beacon_int != params->interval)) {
+ sdata->vif.bss_conf.beacon_int = params->interval;
+ ieee80211_bss_info_change_notify(sdata,
+ BSS_CHANGED_BEACON_INT);
}
/* Need to have a beacon head if we don't have one yet */
struct ieee80211_mgmt *mgmt;
u8 *pos;
struct ieee80211_supported_band *sband;
+ u32 bss_change;
if (local->ops->reset_tsf) {
/* Reset own TSF to allow time synchronization work. */
memcpy(ifibss->bssid, bssid, ETH_ALEN);
- local->hw.conf.beacon_int = beacon_int >= 10 ? beacon_int : 10;
-
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID);
local->oper_channel = chan;
local->oper_channel_type = NL80211_CHAN_NO_HT;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+
+ sdata->vif.bss_conf.beacon_int = beacon_int;
+ bss_change = BSS_CHANGED_BEACON_INT;
+ bss_change |= ieee80211_reset_erp_info(sdata);
+ ieee80211_bss_info_change_notify(sdata, bss_change);
+
sband = local->hw.wiphy->bands[chan->band];
/* Build IBSS probe response */
memset(mgmt->da, 0xff, ETH_ALEN);
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, ifibss->bssid, ETH_ALEN);
- mgmt->u.beacon.beacon_int = cpu_to_le16(local->hw.conf.beacon_int);
+ mgmt->u.beacon.beacon_int = cpu_to_le16(beacon_int);
mgmt->u.beacon.timestamp = cpu_to_le64(tsf);
mgmt->u.beacon.capab_info = cpu_to_le16(capability);
static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_bss *bss)
{
+ u16 beacon_int = bss->cbss.beacon_interval;
+
+ if (beacon_int < 10)
+ beacon_int = 10;
+
__ieee80211_sta_join_ibss(sdata, bss->cbss.bssid,
- bss->cbss.beacon_interval,
+ beacon_int,
bss->cbss.channel,
bss->supp_rates_len, bss->supp_rates,
bss->cbss.capability,
sband = local->hw.wiphy->bands[ifibss->channel->band];
- if (local->hw.conf.beacon_int == 0)
- local->hw.conf.beacon_int = 100;
-
capability = WLAN_CAPABILITY_IBSS;
if (sdata->default_key)
*pos++ = (u8) (rate / 5);
}
- __ieee80211_sta_join_ibss(sdata, bssid, local->hw.conf.beacon_int,
+ __ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int,
ifibss->channel, sband->n_bitrates,
supp_rates, capability, 0);
}
} else
sdata->u.ibss.fixed_bssid = false;
+ sdata->vif.bss_conf.beacon_int = params->beacon_interval;
+
sdata->u.ibss.channel = params->channel;
sdata->u.ibss.fixed_channel = params->channel_fixed;
{
struct ieee80211_local *local = sdata->local;
- if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
- return;
-
if (!changed)
return;
&sdata->vif,
&sdata->vif.bss_conf,
changed);
+
+ /*
+ * DEPRECATED
+ *
+ * ~changed is just there to not do this at resume time
+ */
+ if (changed & BSS_CHANGED_BEACON_INT && ~changed) {
+ local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int;
+ ieee80211_hw_config(local,
+ _IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
+ }
}
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
debugfs_hw_add(local);
- if (local->hw.conf.beacon_int < 10)
- local->hw.conf.beacon_int = 100;
-
if (local->hw.max_listen_interval == 0)
local->hw.max_listen_interval = 1;
sdata->vif.bss_conf.timestamp = bss->cbss.tsf;
sdata->vif.bss_conf.dtim_period = bss->dtim_period;
+ bss_info_changed |= BSS_CHANGED_BEACON_INT;
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
bss->cbss.capability, bss->has_erp_value, bss->erp_value);
spin_unlock_irqrestore(&local->sta_lock, flags);
}
-static inline int sta_info_buffer_expired(struct ieee80211_local *local,
- struct sta_info *sta,
- struct sk_buff *skb)
+static int sta_info_buffer_expired(struct sta_info *sta,
+ struct sk_buff *skb)
{
struct ieee80211_tx_info *info;
int timeout;
info = IEEE80211_SKB_CB(skb);
/* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */
- timeout = (sta->listen_interval * local->hw.conf.beacon_int * 32 /
- 15625) * HZ;
+ timeout = (sta->listen_interval *
+ sta->sdata->vif.bss_conf.beacon_int *
+ 32 / 15625) * HZ;
if (timeout < STA_TX_BUFFER_EXPIRE)
timeout = STA_TX_BUFFER_EXPIRE;
return time_after(jiffies, info->control.jiffies + timeout);
for (;;) {
spin_lock_irqsave(&sta->ps_tx_buf.lock, flags);
skb = skb_peek(&sta->ps_tx_buf);
- if (sta_info_buffer_expired(local, sta, skb))
+ if (sta_info_buffer_expired(sta, skb))
skb = __skb_dequeue(&sta->ps_tx_buf);
else
skb = NULL;
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
/* BSSID is left zeroed, wildcard value */
mgmt->u.beacon.beacon_int =
- cpu_to_le16(local->hw.conf.beacon_int);
+ cpu_to_le16(sdata->vif.bss_conf.beacon_int);
mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
pos = skb_put(skb, 2);