fi])
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
fi
;;
-*-*-cygwin*)
- AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
-
+])
esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[ --disable-libtool-lock force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
])
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
AC_SUBST(NM)
])
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$host" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
;;
-irix*)
- ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
-solaris*)
- ac_symcode='[BDT]'
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-# with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
-else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
- AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
- case "$enable_ltdl_install" in
- no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
- "") enable_ltdl_install=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
- esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
])
- if test x"$enable_ltdl_install" != x"no"; then
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
fi
])
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --disable-libtool-lock force libtool not to do file locking"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
# Initialize some variables set by options.
# The variables have the same names as the options, with
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
echo "$ac_t""$NM" 1>&6
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1654: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if { (eval echo configure:1717: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if { (eval echo configure:1721: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:1773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&5
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1819: checking for _ prefix in compiled symbols" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1828: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo configure:1831: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1857: checking whether ln -s works" >&5
+echo "configure:1653: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
-fi
-
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1899 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1900: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1697 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1698: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1921: checking whether the C compiler needs -belf" >&5
+echo "configure:1719: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1926 "configure"
+#line 1724 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
fi
;;
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1956: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1988: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2023: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2055: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- AS="false"
-fi
-fi
-
-
- ;;
esac
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- need_locks=$enableval
-else
- need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
-
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
target_all=libzgcj.la
else
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2214: checking how to run the C preprocessor" >&5
+echo "configure:1861: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2229 "configure"
+#line 1876 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1882: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2246 "configure"
+#line 1893 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1899: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2263 "configure"
+#line 1910 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2269: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2297: checking for $ac_hdr" >&5
+echo "configure:1944: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2302 "configure"
+#line 1949 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1954: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2336: checking for $ac_func" >&5
+echo "configure:1983: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2341 "configure"
+#line 1988 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2389: checking for working mmap" >&5
+echo "configure:2036: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2397 "configure"
+#line 2044 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:2537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2184: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
for ac_func in memcpy strerror
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2562: checking for $ac_func" >&5
+echo "configure:2209: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2567 "configure"
+#line 2214 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$with_system_zlib" = yes; then
echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:2617: checking for deflate in -lz" >&5
+echo "configure:2264: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2625 "configure"
+#line 2272 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
deflate()
; return 0; }
EOF
-if { (eval echo configure:2636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2668: checking for $ac_hdr" >&5
+echo "configure:2315: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2673 "configure"
+#line 2320 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2678: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
s%@RANLIB@%$RANLIB%g
s%@LD@%$LD%g
s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
s%@LIBTOOL@%$LIBTOOL%g
s%@COMPPATH@%$COMPPATH%g
s%@CPP@%$CPP%g
projects / platform / upstream / linaro-gcc.git / commitdiff