[PATCH] ata_piix: convert pata to new reset mechanism

Convert ata_piix pata ->phy_reset to new reset mechanism.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 4cc1108..d79c252 100644 (file)
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -131,7 +131,7 @@ enum {
 static int piix_init_one (struct pci_dev *pdev,
                                    const struct pci_device_id *ent);
 
-static void piix_pata_phy_reset(struct ata_port *ap);
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes);
 static void piix_sata_phy_reset(struct ata_port *ap);
 static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
@@ -207,7 +207,7 @@ static const struct ata_port_operations piix_pata_ops = {
        .exec_command           = ata_exec_command,
        .dev_select             = ata_std_dev_select,
 
-       .phy_reset              = piix_pata_phy_reset,
+       .probe_reset            = piix_pata_probe_reset,
 
        .bmdma_setup            = ata_bmdma_setup,
        .bmdma_start            = ata_bmdma_start,
@@ -258,8 +258,7 @@ static struct ata_port_info piix_port_info[] = {
        /* ich5_pata */
        {
                .sht            = &piix_sht,
-               .host_flags     = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
-                                 PIIX_FLAG_CHECKINTR,
+               .host_flags     = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
                .pio_mask       = 0x1f, /* pio0-4 */
 #if 0
                .mwdma_mask     = 0x06, /* mwdma1-2 */
@@ -284,7 +283,7 @@ static struct ata_port_info piix_port_info[] = {
        /* piix4_pata */
        {
                .sht            = &piix_sht,
-               .host_flags     = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+               .host_flags     = ATA_FLAG_SLAVE_POSS,
                .pio_mask       = 0x1f, /* pio0-4 */
 #if 0
                .mwdma_mask     = 0x06, /* mwdma1-2 */
@@ -366,30 +365,42 @@ cbl40:
 }
 
 /**
- *     piix_pata_phy_reset - Probe specified port on PATA host controller
- *     @ap: Port to probe
+ *     piix_pata_probeinit - probeinit for PATA host controller
+ *     @ap: Target port
  *
- *     Probe PATA phy.
+ *     Probeinit including cable detection.
  *
  *     LOCKING:
  *     None (inherited from caller).
  */
+static void piix_pata_probeinit(struct ata_port *ap)
+{
+       piix_pata_cbl_detect(ap);
+       ata_std_probeinit(ap);
+}
 
-static void piix_pata_phy_reset(struct ata_port *ap)
+/**
+ *     piix_pata_probe_reset - Perform reset on PATA port and classify
+ *     @ap: Port to reset
+ *     @classes: Resulting classes of attached devices
+ *
+ *     Reset PATA phy and classify attached devices.
+ *
+ *     LOCKING:
+ *     None (inherited from caller).
+ */
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
 
        if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
-               ata_port_disable(ap);
                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-               return;
+               return 0;
        }
 
-       piix_pata_cbl_detect(ap);
-
-       ata_port_probe(ap);
-
-       ata_bus_reset(ap);
+       return ata_drive_probe_reset(ap, piix_pata_probeinit,
+                                    ata_std_softreset, NULL,
+                                    ata_std_postreset, classes);
 }
 
 /**