#include <linux/swapops.h>
#include <linux/page_cgroup.h>
+static bool swap_count_continued(struct swap_info_struct *, pgoff_t,
+ unsigned char);
+static void free_swap_count_continuations(struct swap_info_struct *);
+
static DEFINE_SPINLOCK(swap_lock);
static unsigned int nr_swapfiles;
long nr_swap_pages;
long total_swap_pages;
-static int swap_overflow;
static int least_priority;
static const char Bad_file[] = "Bad swap file entry ";
static inline unsigned char swap_count(unsigned char ent)
{
- return ent & ~SWAP_HAS_CACHE;
+ return ent & ~SWAP_HAS_CACHE; /* may include SWAP_HAS_CONT flag */
}
/* returns 1 if swap entry is freed */
if (usage == SWAP_HAS_CACHE) {
VM_BUG_ON(!has_cache);
has_cache = 0;
- } else if (count < SWAP_MAP_MAX)
- count--;
+ } else if ((count & ~COUNT_CONTINUED) <= SWAP_MAP_MAX) {
+ if (count == COUNT_CONTINUED) {
+ if (swap_count_continued(p, offset, count))
+ count = SWAP_MAP_MAX | COUNT_CONTINUED;
+ else
+ count = SWAP_MAP_MAX;
+ } else
+ count--;
+ }
if (!count)
mem_cgroup_uncharge_swap(entry);
/*
* How many references to page are currently swapped out?
+ * This does not give an exact answer when swap count is continued,
+ * but does include the high COUNT_CONTINUED flag to allow for that.
*/
static inline int page_swapcount(struct page *page)
{
swp_entry_t entry;
unsigned int i = 0;
int retval = 0;
- int reset_overflow = 0;
int shmem;
/*
* together, child after parent. If we race with dup_mmap(), we
* prefer to resolve parent before child, lest we miss entries
* duplicated after we scanned child: using last mm would invert
- * that. Though it's only a serious concern when an overflowed
- * swap count is reset from SWAP_MAP_MAX, preventing a rescan.
+ * that.
*/
start_mm = &init_mm;
atomic_inc(&init_mm.mm_users);
}
/*
- * How could swap count reach 0x7ffe ?
- * There's no way to repeat a swap page within an mm
- * (except in shmem, where it's the shared object which takes
- * the reference count)?
- * We believe SWAP_MAP_MAX cannot occur.(if occur, unsigned
- * short is too small....)
- * If that's wrong, then we should worry more about
- * exit_mmap() and do_munmap() cases described above:
- * we might be resetting SWAP_MAP_MAX too early here.
- *
- * Yes, that's wrong: though very unlikely, swap count 0x7ffe
- * could surely occur if pid_max raised from PID_MAX_DEFAULT;
- * and we are now lowering SWAP_MAP_MAX to 0x7e, making it
- * much easier to reach. But the next patch will fix that.
- *
- * We know "Undead"s can happen, they're okay, so don't
- * report them; but do report if we reset SWAP_MAP_MAX.
- */
- /* We might release the lock_page() in unuse_mm(). */
- if (!PageSwapCache(page) || page_private(page) != entry.val)
- goto retry;
-
- if (swap_count(*swap_map) == SWAP_MAP_MAX) {
- spin_lock(&swap_lock);
- *swap_map = SWAP_HAS_CACHE;
- spin_unlock(&swap_lock);
- reset_overflow = 1;
- }
-
- /*
* If a reference remains (rare), we would like to leave
* the page in the swap cache; but try_to_unmap could
* then re-duplicate the entry once we drop page lock,
* mark page dirty so shrink_page_list will preserve it.
*/
SetPageDirty(page);
-retry:
unlock_page(page);
page_cache_release(page);
}
mmput(start_mm);
- if (reset_overflow) {
- printk(KERN_WARNING "swapoff: cleared swap entry overflow\n");
- swap_overflow = 0;
- }
return retval;
}
up_write(&swap_unplug_sem);
destroy_swap_extents(p);
+ if (p->flags & SWP_CONTINUED)
+ free_swap_count_continuations(p);
+
mutex_lock(&swapon_mutex);
spin_lock(&swap_lock);
drain_mmlist();
/*
* Verify that a swap entry is valid and increment its swap map count.
*
- * Note: if swap_map[] reaches SWAP_MAP_MAX the entries are treated as
- * "permanent", but will be reclaimed by the next swapoff.
* Returns error code in following case.
* - success -> 0
* - swp_entry is invalid -> EINVAL
* - swp_entry is migration entry -> EINVAL
* - swap-cache reference is requested but there is already one. -> EEXIST
* - swap-cache reference is requested but the entry is not used. -> ENOENT
+ * - swap-mapped reference requested but needs continued swap count. -> ENOMEM
*/
static int __swap_duplicate(swp_entry_t entry, unsigned char usage)
{
} else if (count || has_cache) {
- if (count < SWAP_MAP_MAX - 1)
- count++;
- else if (count <= SWAP_MAP_MAX) {
- if (swap_overflow++ < 5)
- printk(KERN_WARNING
- "swap_dup: swap entry overflow\n");
- count = SWAP_MAP_MAX;
- } else
+ if ((count & ~COUNT_CONTINUED) < SWAP_MAP_MAX)
+ count += usage;
+ else if ((count & ~COUNT_CONTINUED) > SWAP_MAP_MAX)
err = -EINVAL;
+ else if (swap_count_continued(p, offset, count))
+ count = COUNT_CONTINUED;
+ else
+ err = -ENOMEM;
} else
err = -ENOENT; /* unused swap entry */
/*
* increase reference count of swap entry by 1.
*/
-void swap_duplicate(swp_entry_t entry)
+int swap_duplicate(swp_entry_t entry)
{
- __swap_duplicate(entry, 1);
+ int err = 0;
+
+ while (!err && __swap_duplicate(entry, 1) == -ENOMEM)
+ err = add_swap_count_continuation(entry, GFP_ATOMIC);
+ return err;
}
/*
*offset = ++toff;
return nr_pages? ++nr_pages: 0;
}
+
+/*
+ * add_swap_count_continuation - called when a swap count is duplicated
+ * beyond SWAP_MAP_MAX, it allocates a new page and links that to the entry's
+ * page of the original vmalloc'ed swap_map, to hold the continuation count
+ * (for that entry and for its neighbouring PAGE_SIZE swap entries). Called
+ * again when count is duplicated beyond SWAP_MAP_MAX * SWAP_CONT_MAX, etc.
+ *
+ * These continuation pages are seldom referenced: the common paths all work
+ * on the original swap_map, only referring to a continuation page when the
+ * low "digit" of a count is incremented or decremented through SWAP_MAP_MAX.
+ *
+ * add_swap_count_continuation(, GFP_ATOMIC) can be called while holding
+ * page table locks; if it fails, add_swap_count_continuation(, GFP_KERNEL)
+ * can be called after dropping locks.
+ */
+int add_swap_count_continuation(swp_entry_t entry, gfp_t gfp_mask)
+{
+ struct swap_info_struct *si;
+ struct page *head;
+ struct page *page;
+ struct page *list_page;
+ pgoff_t offset;
+ unsigned char count;
+
+ /*
+ * When debugging, it's easier to use __GFP_ZERO here; but it's better
+ * for latency not to zero a page while GFP_ATOMIC and holding locks.
+ */
+ page = alloc_page(gfp_mask | __GFP_HIGHMEM);
+
+ si = swap_info_get(entry);
+ if (!si) {
+ /*
+ * An acceptable race has occurred since the failing
+ * __swap_duplicate(): the swap entry has been freed,
+ * perhaps even the whole swap_map cleared for swapoff.
+ */
+ goto outer;
+ }
+
+ offset = swp_offset(entry);
+ count = si->swap_map[offset] & ~SWAP_HAS_CACHE;
+
+ if ((count & ~COUNT_CONTINUED) != SWAP_MAP_MAX) {
+ /*
+ * The higher the swap count, the more likely it is that tasks
+ * will race to add swap count continuation: we need to avoid
+ * over-provisioning.
+ */
+ goto out;
+ }
+
+ if (!page) {
+ spin_unlock(&swap_lock);
+ return -ENOMEM;
+ }
+
+ /*
+ * We are fortunate that although vmalloc_to_page uses pte_offset_map,
+ * no architecture is using highmem pages for kernel pagetables: so it
+ * will not corrupt the GFP_ATOMIC caller's atomic pagetable kmaps.
+ */
+ head = vmalloc_to_page(si->swap_map + offset);
+ offset &= ~PAGE_MASK;
+
+ /*
+ * Page allocation does not initialize the page's lru field,
+ * but it does always reset its private field.
+ */
+ if (!page_private(head)) {
+ BUG_ON(count & COUNT_CONTINUED);
+ INIT_LIST_HEAD(&head->lru);
+ set_page_private(head, SWP_CONTINUED);
+ si->flags |= SWP_CONTINUED;
+ }
+
+ list_for_each_entry(list_page, &head->lru, lru) {
+ unsigned char *map;
+
+ /*
+ * If the previous map said no continuation, but we've found
+ * a continuation page, free our allocation and use this one.
+ */
+ if (!(count & COUNT_CONTINUED))
+ goto out;
+
+ map = kmap_atomic(list_page, KM_USER0) + offset;
+ count = *map;
+ kunmap_atomic(map, KM_USER0);
+
+ /*
+ * If this continuation count now has some space in it,
+ * free our allocation and use this one.
+ */
+ if ((count & ~COUNT_CONTINUED) != SWAP_CONT_MAX)
+ goto out;
+ }
+
+ list_add_tail(&page->lru, &head->lru);
+ page = NULL; /* now it's attached, don't free it */
+out:
+ spin_unlock(&swap_lock);
+outer:
+ if (page)
+ __free_page(page);
+ return 0;
+}
+
+/*
+ * swap_count_continued - when the original swap_map count is incremented
+ * from SWAP_MAP_MAX, check if there is already a continuation page to carry
+ * into, carry if so, or else fail until a new continuation page is allocated;
+ * when the original swap_map count is decremented from 0 with continuation,
+ * borrow from the continuation and report whether it still holds more.
+ * Called while __swap_duplicate() or swap_entry_free() holds swap_lock.
+ */
+static bool swap_count_continued(struct swap_info_struct *si,
+ pgoff_t offset, unsigned char count)
+{
+ struct page *head;
+ struct page *page;
+ unsigned char *map;
+
+ head = vmalloc_to_page(si->swap_map + offset);
+ if (page_private(head) != SWP_CONTINUED) {
+ BUG_ON(count & COUNT_CONTINUED);
+ return false; /* need to add count continuation */
+ }
+
+ offset &= ~PAGE_MASK;
+ page = list_entry(head->lru.next, struct page, lru);
+ map = kmap_atomic(page, KM_USER0) + offset;
+
+ if (count == SWAP_MAP_MAX) /* initial increment from swap_map */
+ goto init_map; /* jump over SWAP_CONT_MAX checks */
+
+ if (count == (SWAP_MAP_MAX | COUNT_CONTINUED)) { /* incrementing */
+ /*
+ * Think of how you add 1 to 999
+ */
+ while (*map == (SWAP_CONT_MAX | COUNT_CONTINUED)) {
+ kunmap_atomic(map, KM_USER0);
+ page = list_entry(page->lru.next, struct page, lru);
+ BUG_ON(page == head);
+ map = kmap_atomic(page, KM_USER0) + offset;
+ }
+ if (*map == SWAP_CONT_MAX) {
+ kunmap_atomic(map, KM_USER0);
+ page = list_entry(page->lru.next, struct page, lru);
+ if (page == head)
+ return false; /* add count continuation */
+ map = kmap_atomic(page, KM_USER0) + offset;
+init_map: *map = 0; /* we didn't zero the page */
+ }
+ *map += 1;
+ kunmap_atomic(map, KM_USER0);
+ page = list_entry(page->lru.prev, struct page, lru);
+ while (page != head) {
+ map = kmap_atomic(page, KM_USER0) + offset;
+ *map = COUNT_CONTINUED;
+ kunmap_atomic(map, KM_USER0);
+ page = list_entry(page->lru.prev, struct page, lru);
+ }
+ return true; /* incremented */
+
+ } else { /* decrementing */
+ /*
+ * Think of how you subtract 1 from 1000
+ */
+ BUG_ON(count != COUNT_CONTINUED);
+ while (*map == COUNT_CONTINUED) {
+ kunmap_atomic(map, KM_USER0);
+ page = list_entry(page->lru.next, struct page, lru);
+ BUG_ON(page == head);
+ map = kmap_atomic(page, KM_USER0) + offset;
+ }
+ BUG_ON(*map == 0);
+ *map -= 1;
+ if (*map == 0)
+ count = 0;
+ kunmap_atomic(map, KM_USER0);
+ page = list_entry(page->lru.prev, struct page, lru);
+ while (page != head) {
+ map = kmap_atomic(page, KM_USER0) + offset;
+ *map = SWAP_CONT_MAX | count;
+ count = COUNT_CONTINUED;
+ kunmap_atomic(map, KM_USER0);
+ page = list_entry(page->lru.prev, struct page, lru);
+ }
+ return count == COUNT_CONTINUED;
+ }
+}
+
+/*
+ * free_swap_count_continuations - swapoff free all the continuation pages
+ * appended to the swap_map, after swap_map is quiesced, before vfree'ing it.
+ */
+static void free_swap_count_continuations(struct swap_info_struct *si)
+{
+ pgoff_t offset;
+
+ for (offset = 0; offset < si->max; offset += PAGE_SIZE) {
+ struct page *head;
+ head = vmalloc_to_page(si->swap_map + offset);
+ if (page_private(head)) {
+ struct list_head *this, *next;
+ list_for_each_safe(this, next, &head->lru) {
+ struct page *page;
+ page = list_entry(this, struct page, lru);
+ list_del(this);
+ __free_page(page);
+ }
+ }
+ }
+}
projects / platform / kernel / linux-amlogic.git / commitdiff