Restore patch reverted on trunk instead of a branch

From-SVN: r279972

diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c
index 127927d..c212257 100644 (file)
--- a/gcc/config/rs6000/rs6000.c
+++ b/gcc/config/rs6000/rs6000.c
@@ -6753,6 +6753,90 @@ hard_reg_and_mode_to_addr_mask (rtx reg, machine_mode mode)
   return addr_mask;
 }
 
+/* Helper function to adjust a vector address (ADDR) to point to a given
+   element offset (ELEMENT_OFFSET).  This function handles updating addresses
+   that use PLUS (i.e. a D_FORM address with an integer constant or an X_FORM
+   address adding two registers).  If we can't update the address directly, we
+   can use the base register temporary (BASE_TMP) to form a valid address.  The
+   mode of the element within the vector is SCALAR_MODE.  */
+
+rtx
+adjust_vec_address_plus (rtx addr,
+                        rtx element_offset,
+                        rtx base_tmp,
+                        machine_mode scalar_mode)
+{
+  gcc_assert (GET_CODE (addr) == PLUS);
+
+  rtx new_addr = NULL;
+  rtx op0 = XEXP (addr, 0);
+  rtx op1 = XEXP (addr, 1);
+  rtx insn;
+
+  gcc_assert (REG_P (op0) || SUBREG_P (op0));
+
+  if (CONST_INT_P (op1) && CONST_INT_P (element_offset))
+    {
+      HOST_WIDE_INT offset = INTVAL (op1) + INTVAL (element_offset);
+      rtx offset_rtx = GEN_INT (offset);
+      new_addr = gen_rtx_PLUS (Pmode, op0, offset_rtx);
+
+      enum insn_form iform = address_to_insn_form (new_addr, scalar_mode,
+                                                  NON_PREFIXED_DEFAULT);
+
+      /* If the address isn't valid, change REG+OFFSET into REG+REG.  */
+      if (iform == INSN_FORM_BAD)
+       {
+         /* The offset either overflowed or it might not be a valid DS/DQ
+            offset, move offset to the temporary (which will likely be split),
+            and do X-FORM addressing.  */
+         emit_move_insn (base_tmp, offset_rtx);
+         new_addr = gen_rtx_PLUS (Pmode, op0, base_tmp);
+       }
+    }
+
+  else
+    {
+      bool op1_reg_p = (REG_P (op1) || SUBREG_P (op1));
+      bool ele_reg_p = (REG_P (element_offset) || SUBREG_P (element_offset));
+
+      /* Note, ADDI requires the register being added to be a base
+        register.  If the register was R0, load it up into the temporary
+        and do the add.  */
+      if (op1_reg_p
+         && (ele_reg_p || reg_or_subregno (op1) != FIRST_GPR_REGNO))
+       {
+         insn = gen_add3_insn (base_tmp, op1, element_offset);
+         gcc_assert (insn != NULL_RTX);
+         emit_insn (insn);
+       }
+
+      else if (ele_reg_p
+              && reg_or_subregno (element_offset) != FIRST_GPR_REGNO)
+       {
+         insn = gen_add3_insn (base_tmp, element_offset, op1);
+         gcc_assert (insn != NULL_RTX);
+         emit_insn (insn);
+       }
+
+      /* Make sure we don't overwrite the temporary if the element being
+        extracted is variable, and we've put the offset into base_tmp
+        previously.  */
+      else if (reg_mentioned_p (base_tmp, element_offset))
+       emit_insn (gen_add2_insn (base_tmp, op1));
+
+      else
+       {
+         emit_move_insn (base_tmp, op1);
+         emit_insn (gen_add2_insn (base_tmp, element_offset));
+       }
+
+      new_addr = gen_rtx_PLUS (Pmode, op0, base_tmp);
+    }
+
+  return new_addr;
+}
+
 /* Adjust a memory address (MEM) of a vector type to point to a scalar field
    within the vector (ELEMENT) with a mode (SCALAR_MODE).  Use a base register
    temporary (BASE_TMP) to fixup the address.  Return the new memory address
@@ -6898,6 +6982,8 @@ rs6000_adjust_vec_address (rtx scalar_reg,
        valid_addr_p = (addr_mask & RELOAD_REG_OFFSET) != 0;
     }
 
+  /* An address that is a single register is always valid for either indexed or
+     offsettable loads.  */
   else if (REG_P (new_addr) || SUBREG_P (new_addr))
     valid_addr_p = true;
 

diff --git a/gcc/ipa-inline-analysis.c b/gcc/ipa-inline-analysis.c
index eb42cae..8b400ff 100644 (file)
--- a/gcc/ipa-inline-analysis.c
+++ b/gcc/ipa-inline-analysis.c
@@ -462,7 +462,7 @@ offline_size (struct cgraph_node *node, ipa_size_summary *info)
   return 0;
 }
 
-/* Estimate the growth caused by inlining NODE into all callees.  */
+/* Estimate the growth caused by inlining NODE into all callers.  */
 
 int
 estimate_growth (struct cgraph_node *node)

diff --git a/gcc/ipa-inline.c b/gcc/ipa-inline.c
index 3b68fc4..302badf 100644 (file)
--- a/gcc/ipa-inline.c
+++ b/gcc/ipa-inline.c
@@ -184,8 +184,8 @@ caller_growth_limits (struct cgraph_edge *e)
      the function to shrink if it went over the limits by forced inlining.  */
   newsize = estimate_size_after_inlining (to, e);
   if (newsize >= ipa_size_summaries->get (what)->size
-      && newsize > opt_for_fn (to->decl, param_large_function_insns)
-      && newsize > limit)
+      && (newsize > opt_for_fn (to->decl, param_large_function_insns)
+         || newsize > limit))
     {
       e->inline_failed = CIF_LARGE_FUNCTION_GROWTH_LIMIT;
       return false;