net: dsa: mv88e6060: setup random mac address

As for mv88e6xxx, setup the switch from within the mv88e6060 driver with
a random MAC address, and remove the .set_addr implementation.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index d64be2b..6173be8 100644 (file)
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/etherdevice.h>
 #include <linux/jiffies.h>
 #include <linux/list.h>
 #include <linux/module.h>
@@ -188,6 +189,27 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
        return 0;
 }
 
+static int mv88e6060_setup_addr(struct dsa_switch *ds)
+{
+       u8 addr[ETH_ALEN];
+       u16 val;
+
+       eth_random_addr(addr);
+
+       val = addr[0] << 8 | addr[1];
+
+       /* The multicast bit is always transmitted as a zero, so the switch uses
+        * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
+        */
+       val &= 0xfeff;
+
+       REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, val);
+       REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
+       REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
+
+       return 0;
+}
+
 static int mv88e6060_setup(struct dsa_switch *ds)
 {
        int ret;
@@ -203,6 +225,10 @@ static int mv88e6060_setup(struct dsa_switch *ds)
        if (ret < 0)
                return ret;
 
+       ret = mv88e6060_setup_addr(ds);
+       if (ret < 0)
+               return ret;
+
        for (i = 0; i < MV88E6060_PORTS; i++) {
                ret = mv88e6060_setup_port(ds, i);
                if (ret < 0)
@@ -212,22 +238,6 @@ static int mv88e6060_setup(struct dsa_switch *ds)
        return 0;
 }
 
-static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
-{
-       u16 val = addr[0] << 8 | addr[1];
-
-       /* The multicast bit is always transmitted as a zero, so the switch uses
-        * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
-        */
-       val &= 0xfeff;
-
-       REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, val);
-       REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
-       REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
-
-       return 0;
-}
-
 static int mv88e6060_port_to_phy_addr(int port)
 {
        if (port >= 0 && port < MV88E6060_PORTS)
@@ -262,7 +272,6 @@ static const struct dsa_switch_ops mv88e6060_switch_ops = {
        .get_tag_protocol = mv88e6060_get_tag_protocol,
        .probe          = mv88e6060_drv_probe,
        .setup          = mv88e6060_setup,
-       .set_addr       = mv88e6060_set_addr,
        .phy_read       = mv88e6060_phy_read,
        .phy_write      = mv88e6060_phy_write,
 };