drm/i915: More assorted dev_priv cleanups
authorTvrtko Ursulin <tvrtko.ursulin@intel.com>
Mon, 7 Nov 2016 09:29:20 +0000 (09:29 +0000)
committerTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fri, 11 Nov 2016 14:58:26 +0000 (14:58 +0000)
A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.

v2: Keep original order. (Ville Syrjala)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gpu_error.c
drivers/gpu/drm/i915/i915_irq.c
drivers/gpu/drm/i915/intel_crt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c
drivers/gpu/drm/i915/intel_hotplug.c
drivers/gpu/drm/i915/intel_psr.c

index 7ce8187..9eabf54 100644 (file)
@@ -2577,24 +2577,24 @@ struct drm_i915_cmd_table {
 #define HAS_128_BYTE_Y_TILING(dev_priv) (!IS_GEN2(dev_priv) && \
                                         !(IS_I915G(dev_priv) || \
                                         IS_I915GM(dev_priv)))
-#define SUPPORTS_TV(dev)               (INTEL_INFO(dev)->supports_tv)
-#define I915_HAS_HOTPLUG(dev)           (INTEL_INFO(dev)->has_hotplug)
+#define SUPPORTS_TV(dev_priv)          ((dev_priv)->info.supports_tv)
+#define I915_HAS_HOTPLUG(dev_priv)     ((dev_priv)->info.has_hotplug)
 
-#define HAS_FW_BLC(dev_priv) (INTEL_GEN(dev_priv) > 2)
-#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
-#define HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
+#define HAS_FW_BLC(dev_priv)   (INTEL_GEN(dev_priv) > 2)
+#define HAS_PIPE_CXSR(dev_priv) ((dev_priv)->info.has_pipe_cxsr)
+#define HAS_FBC(dev_priv)      ((dev_priv)->info.has_fbc)
 
 #define HAS_IPS(dev_priv)      (IS_HSW_ULT(dev_priv) || IS_BROADWELL(dev_priv))
 
-#define HAS_DP_MST(dev)        (INTEL_INFO(dev)->has_dp_mst)
+#define HAS_DP_MST(dev_priv)   ((dev_priv)->info.has_dp_mst)
 
-#define HAS_DDI(dev_priv)      ((dev_priv)->info.has_ddi)
-#define HAS_FPGA_DBG_UNCLAIMED(dev)    (INTEL_INFO(dev)->has_fpga_dbg)
-#define HAS_PSR(dev)           (INTEL_INFO(dev)->has_psr)
-#define HAS_RC6(dev)           (INTEL_INFO(dev)->has_rc6)
-#define HAS_RC6p(dev)          (INTEL_INFO(dev)->has_rc6p)
+#define HAS_DDI(dev_priv)               ((dev_priv)->info.has_ddi)
+#define HAS_FPGA_DBG_UNCLAIMED(dev_priv) ((dev_priv)->info.has_fpga_dbg)
+#define HAS_PSR(dev_priv)               ((dev_priv)->info.has_psr)
+#define HAS_RC6(dev_priv)               ((dev_priv)->info.has_rc6)
+#define HAS_RC6p(dev_priv)              ((dev_priv)->info.has_rc6p)
 
-#define HAS_CSR(dev)   (INTEL_INFO(dev)->has_csr)
+#define HAS_CSR(dev_priv)      ((dev_priv)->info.has_csr)
 
 #define HAS_RUNTIME_PM(dev_priv) ((dev_priv)->info.has_runtime_pm)
 #define HAS_64BIT_RELOC(dev_priv) ((dev_priv)->info.has_64bit_reloc)
index 3b430cd..5d620bd 100644 (file)
@@ -573,7 +573,7 @@ int i915_error_state_to_str(struct drm_i915_error_state_buf *m,
                   pdev->subsystem_device);
        err_printf(m, "IOMMU enabled?: %d\n", error->iommu);
 
-       if (HAS_CSR(dev)) {
+       if (HAS_CSR(dev_priv)) {
                struct intel_csr *csr = &dev_priv->csr;
 
                err_printf(m, "DMC loaded: %s\n",
index 6d7505b..285ee1e 100644 (file)
@@ -3678,7 +3678,7 @@ static void i915_irq_preinstall(struct drm_device * dev)
        struct drm_i915_private *dev_priv = to_i915(dev);
        int pipe;
 
-       if (I915_HAS_HOTPLUG(dev)) {
+       if (I915_HAS_HOTPLUG(dev_priv)) {
                i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);
                I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
        }
@@ -3712,7 +3712,7 @@ static int i915_irq_postinstall(struct drm_device *dev)
                I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
                I915_USER_INTERRUPT;
 
-       if (I915_HAS_HOTPLUG(dev)) {
+       if (I915_HAS_HOTPLUG(dev_priv)) {
                i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);
                POSTING_READ(PORT_HOTPLUG_EN);
 
@@ -3880,7 +3880,7 @@ static void i915_irq_uninstall(struct drm_device * dev)
        struct drm_i915_private *dev_priv = to_i915(dev);
        int pipe;
 
-       if (I915_HAS_HOTPLUG(dev)) {
+       if (I915_HAS_HOTPLUG(dev_priv)) {
                i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);
                I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
        }
index 30eb95b..fed6195 100644 (file)
@@ -693,7 +693,7 @@ intel_crt_detect(struct drm_connector *connector, bool force)
        power_domain = intel_display_port_power_domain(intel_encoder);
        intel_display_power_get(dev_priv, power_domain);
 
-       if (I915_HAS_HOTPLUG(dev)) {
+       if (I915_HAS_HOTPLUG(dev_priv)) {
                /* We can not rely on the HPD pin always being correctly wired
                 * up, for example many KVM do not pass it through, and so
                 * only trust an assertion that the monitor is connected.
@@ -715,7 +715,7 @@ intel_crt_detect(struct drm_connector *connector, bool force)
         * broken monitor (without edid) to work behind a broken kvm (that fails
         * to have the right resistors for HP detection) needs to fix this up.
         * For now just bail out. */
-       if (I915_HAS_HOTPLUG(dev) && !i915.load_detect_test) {
+       if (I915_HAS_HOTPLUG(dev_priv) && !i915.load_detect_test) {
                status = connector_status_disconnected;
                goto out;
        }
@@ -915,7 +915,7 @@ void intel_crt_init(struct drm_device *dev)
                crt->base.disable = intel_disable_crt;
        }
        crt->base.enable = intel_enable_crt;
-       if (I915_HAS_HOTPLUG(dev) &&
+       if (I915_HAS_HOTPLUG(dev_priv) &&
            !dmi_check_system(intel_spurious_crt_detect))
                crt->base.hpd_pin = HPD_CRT;
        if (HAS_DDI(dev_priv)) {
@@ -932,7 +932,7 @@ void intel_crt_init(struct drm_device *dev)
 
        drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
-       if (!I915_HAS_HOTPLUG(dev))
+       if (!I915_HAS_HOTPLUG(dev_priv))
                intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
        /*
index 1547349..0f09b68 100644 (file)
@@ -8440,7 +8440,7 @@ static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
                }
        }
 
-       if (HAS_PIPE_CXSR(dev)) {
+       if (HAS_PIPE_CXSR(dev_priv)) {
                if (intel_crtc->lowfreq_avail) {
                        DRM_DEBUG_KMS("enabling CxSR downclocking\n");
                        pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
@@ -15652,7 +15652,7 @@ static void intel_setup_outputs(struct drm_device *dev)
        } else if (IS_GEN2(dev_priv))
                intel_dvo_init(dev);
 
-       if (SUPPORTS_TV(dev))
+       if (SUPPORTS_TV(dev_priv))
                intel_tv_init(dev);
 
        intel_psr_init(dev);
index 581971f..56431e0 100644 (file)
@@ -5743,7 +5743,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
        }
 
        /* init MST on ports that can support it */
-       if (HAS_DP_MST(dev) && !is_edp(intel_dp) &&
+       if (HAS_DP_MST(dev_priv) && !is_edp(intel_dp) &&
            (port == PORT_B || port == PORT_C || port == PORT_D))
                intel_dp_mst_encoder_init(intel_dig_port,
                                          intel_connector->base.base.id);
index 334d47b..3d546c0 100644 (file)
@@ -501,7 +501,7 @@ static void i915_hpd_poll_init_work(struct work_struct *work)
                if (intel_connector->mst_port)
                        continue;
 
-               if (!connector->polled && I915_HAS_HOTPLUG(dev) &&
+               if (!connector->polled && I915_HAS_HOTPLUG(dev_priv) &&
                    intel_connector->encoder->hpd_pin > HPD_NONE) {
                        connector->polled = enabled ?
                                DRM_CONNECTOR_POLL_CONNECT |
index 271a3e2..41e6e92 100644 (file)
@@ -427,7 +427,7 @@ void intel_psr_enable(struct intel_dp *intel_dp)
        struct drm_i915_private *dev_priv = to_i915(dev);
        struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
 
-       if (!HAS_PSR(dev)) {
+       if (!HAS_PSR(dev_priv)) {
                DRM_DEBUG_KMS("PSR not supported on this platform\n");
                return;
        }