--- /dev/null
+# Author: echo <fei.geng@windriver.com>
+# Date: April 28 2009
+# Summary:Fix perl install directory to /usr/bin
+#
+# Upstream-Status: Inappropriate [configuration]
+
+--- a/configure
++++ b/configure
+@@ -22365,13 +22365,7 @@
+ #define APACHE_MPM_DIR "$MPM_DIR"
+ _ACEOF
+
+-
+-perlbin=`$ac_aux_dir/PrintPath perl`
+-if test "x$perlbin" = "x"; then
+- perlbin="/replace/with/path/to/perl/interpreter"
+-fi
+-
+-
++perlbin='/usr/bin/perl'
+
+ BSD_MAKEFILE=no
+ ap_make_include=include
+--- a/configure.in
++++ b/configure.in
+@@ -638,10 +638,7 @@
+ AC_DEFINE_UNQUOTED(APACHE_MPM_DIR, "$MPM_DIR",
+ [Location of the source for the current MPM])
+
+-perlbin=`$ac_aux_dir/PrintPath perl`
+-if test "x$perlbin" = "x"; then
+- perlbin="/replace/with/path/to/perl/interpreter"
+-fi
++perlbin='/usr/bin/perl'
+ AC_SUBST(perlbin)
+
+ dnl If we are running on BSD/OS, we need to use the BSD .include syntax.
--- /dev/null
+--- httpd-2.2.8.orig/build/ltmain.sh
++++ httpd-2.2.8/build/ltmain.sh
+@@ -1515,7 +1515,7 @@ EOF
+ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+ # We need an absolute path.
+ case $dir in
+- [\\/]* | [A-Za-z]:[\\/]*) ;;
++ =* | [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+@@ -2558,7 +2558,7 @@ EOF
+ $echo "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+- test "$hardcode_into_libs" = yes; then
++ test "x$wrs_use_rpaths" = "xyes" && test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+@@ -2832,7 +2832,7 @@ EOF
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+- { test "$hardcode_into_libs" != yes ||
++ { test "$hardcode_into_libs" != yes || test "x$wrs_use_rpaths" != "xyes" ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+@@ -3426,7 +3426,8 @@ EOF
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
++ if test "$hardcode_into_libs" != yes || test "x$wrs_use_rpaths" != "xyes" ||
++ test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+@@ -3843,7 +3844,7 @@ EOF
+ case $archive_cmds in
+ *\$LD\ *) wl= ;;
+ esac
+- if test "$hardcode_into_libs" = yes; then
++ if test "$hardcode_into_libs" = yes && test "x$wrs_use_rpaths" = "xyes" ; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+@@ -4397,6 +4398,27 @@ EOF
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
++
++ # short circuit putting rpaths in executables
++ #
++ if test "x$wrs_use_rpaths" != "xyes" ; then
++ flag=
++ for libdir in $compile_rpath; do
++ case $(echo $libdir | ${SED} 's,/[/]*,/,g') in
++ /usr/lib/* | /usr/lib32/* | /usr/lib64/* ) flag="$flag $libdir" ;;
++ esac
++ done
++ compile_rpath="$flag"
++
++ flag=
++ for libdir in $finalize_rpath; do
++ case $(echo $libdir | ${SED} 's,/[/]*,/,g') in
++ /usr/lib/* | /usr/lib32/* | /usr/lib64/* ) flag="$flag $libdir" ;;
++ esac
++ done
++ finalize_rpath="$flag"
++ fi
++
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
--- /dev/null
+Fix build scripts to use correct libtool filename
+
+Upstream-Status: Inappropriate [configuration]
+
+---
+ httpd-2.4.2/build/config_vars.sh.in | 2 +-
+ httpd-2.4.2/configure | 2 +-
+ httpd-2.4.2/configure.in | 2 +-
+ httpd-2.4.2/support/apxs.in | 2 +-
+ 4 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/build/config_vars.sh.in
++++ b/build/config_vars.sh.in
+@@ -35,7 +35,7 @@ else
+ APU_CONFIG=@APU_CONFIG@
+ fi
+
+-APR_LIBTOOL="`${APR_CONFIG} --apr-libtool`"
++APR_LIBTOOL="`${APR_CONFIG} --apr-libtool | sed -e s,libtool,${host_alias}-libtool,`"
+ APR_INCLUDEDIR="`${APR_CONFIG} --includedir`"
+ test -n "@APU_CONFIG@" && APU_INCLUDEDIR="`${APU_CONFIG} --includedir`"
+
+--- a/configure
++++ b/configure
+@@ -6205,7 +6205,7 @@ case $host in
+ if test "x$LTFLAGS" = "x"; then
+ LTFLAGS='--silent'
+ fi
+- my_libtool=`$apr_config --apr-libtool`
++ my_libtool=`$apr_config --apr-libtool | sed -e s,libtool,${host_alias}-libtool,`
+ LIBTOOL="$my_libtool \$(LTFLAGS)"
+ libtoolversion=`$my_libtool --version`
+ case $libtoolversion in
+--- a/configure.in
++++ b/configure.in
+@@ -264,7 +264,7 @@ case $host in
+ if test "x$LTFLAGS" = "x"; then
+ LTFLAGS='--silent'
+ fi
+- my_libtool=`$apr_config --apr-libtool`
++ my_libtool=`$apr_config --apr-libtool | sed -e s,libtool,${host_alias}-libtool,`
+ LIBTOOL="$my_libtool \$(LTFLAGS)"
+ libtoolversion=`$my_libtool --version`
+ case $libtoolversion in
+--- a/support/apxs.in
++++ b/support/apxs.in
+@@ -352,7 +352,7 @@ if ($apr_major_version < 2) {
+ }
+ }
+
+-my $libtool = `$apr_config --apr-libtool`;
++my $libtool = `$apr_config --apr-libtool| sed -e s,libtool,${host_alias}-libtool,`;
+ chomp($libtool);
+
+ my $apr_includedir = `$apr_config --includes`;
--- /dev/null
+
+Bump up the core size limit if CoreDumpDirectory is
+configured.
+
+Upstream-Status: Pending
+
+Note: upstreaming was discussed but there are competing desires;
+ there are portability oddities here too.
+
+--- httpd-2.4.1/server/core.c.corelimit
++++ httpd-2.4.1/server/core.c
+@@ -4433,6 +4433,25 @@ static int core_post_config(apr_pool_t *
+ }
+ apr_pool_cleanup_register(pconf, NULL, ap_mpm_end_gen_helper,
+ apr_pool_cleanup_null);
++
++#ifdef RLIMIT_CORE
++ if (ap_coredumpdir_configured) {
++ struct rlimit lim;
++
++ if (getrlimit(RLIMIT_CORE, &lim) == 0 && lim.rlim_cur == 0) {
++ lim.rlim_cur = lim.rlim_max;
++ if (setrlimit(RLIMIT_CORE, &lim) == 0) {
++ ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, NULL,
++ "core dump file size limit raised to %lu bytes",
++ lim.rlim_cur);
++ } else {
++ ap_log_error(APLOG_MARK, APLOG_NOTICE, errno, NULL,
++ "core dump file size is zero, setrlimit failed");
++ }
++ }
++ }
++#endif
++
+ return OK;
+ }
+
--- /dev/null
+
+There is no need to "suck in" the apr/apr-util symbols when using
+a shared libapr{,util}, it just bloats the symbol table; so don't.
+
+Upstream-HEAD: needed
+Upstream-2.0: omit
+Upstream-Status: Pending
+
+Note: EXPORT_DIRS change is conditional on using shared apr
+
+--- httpd-2.4.1/server/Makefile.in.export
++++ httpd-2.4.1/server/Makefile.in
+@@ -57,9 +57,6 @@ export_files:
+ ( for dir in $(EXPORT_DIRS); do \
+ ls $$dir/*.h ; \
+ done; \
+- for dir in $(EXPORT_DIRS_APR); do \
+- ls $$dir/ap[ru].h $$dir/ap[ru]_*.h 2>/dev/null; \
+- done; \
+ ) | sort -u > $@
+
+ exports.c: export_files
--- /dev/null
+
+Log the SELinux context at startup.
+
+Upstream-Status: Inappropriate [other]
+
+Note: unlikely to be any interest in this upstream
+
+--- httpd-2.4.1/configure.in.selinux
++++ httpd-2.4.1/configure.in
+@@ -458,6 +458,11 @@ fopen64
+ dnl confirm that a void pointer is large enough to store a long integer
+ APACHE_CHECK_VOID_PTR_LEN
+
++AC_CHECK_LIB(selinux, is_selinux_enabled, [
++ AC_DEFINE(HAVE_SELINUX, 1, [Defined if SELinux is supported])
++ APR_ADDTO(AP_LIBS, [-lselinux])
++])
++
+ AC_CACHE_CHECK([for gettid()], ac_cv_gettid,
+ [AC_TRY_RUN(#define _GNU_SOURCE
+ #include <unistd.h>
+--- httpd-2.4.1/server/core.c.selinux
++++ httpd-2.4.1/server/core.c
+@@ -58,6 +58,10 @@
+ #include <unistd.h>
+ #endif
+
++#ifdef HAVE_SELINUX
++#include <selinux/selinux.h>
++#endif
++
+ /* LimitRequestBody handling */
+ #define AP_LIMIT_REQ_BODY_UNSET ((apr_off_t) -1)
+ #define AP_DEFAULT_LIMIT_REQ_BODY ((apr_off_t) 0)
+@@ -4452,6 +4456,28 @@ static int core_post_config(apr_pool_t *
+ }
+ #endif
+
++#ifdef HAVE_SELINUX
++ {
++ static int already_warned = 0;
++ int is_enabled = is_selinux_enabled() > 0;
++
++ if (is_enabled && !already_warned) {
++ security_context_t con;
++
++ if (getcon(&con) == 0) {
++
++ ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, NULL,
++ "SELinux policy enabled; "
++ "httpd running as context %s", con);
++
++ already_warned = 1;
++
++ freecon(con);
++ }
++ }
++ }
++#endif
++
+ return OK;
+ }
+
--- /dev/null
+
+* modules/loggers/mod_log_debug.c: Mark private globals as static.
+http://svn.apache.org/viewvc?view=revision&revision=1326980
+
+* modules/filters/sed1.c: Mark private globals as static const.
+ (command): Change p3 pointer to const.
+http://svn.apache.org/viewvc?view=revision&revision=1326984
+
+* modules/filters/config.m4: Prevent libsed internals from polluting
+ the global symbol namespace.
+http://svn.apache.org/viewvc?view=revision&revision=1326991
+
+Upstream-Status: Backport
+
+--- httpd-2.4.2/modules/loggers/mod_log_debug.c
++++ httpd-2.4.2/modules/loggers/mod_log_debug.c
+@@ -35,8 +35,8 @@
+ apr_array_header_t *entries;
+ } log_debug_dirconf;
+
+-const char *allhooks = "all";
+-const char * const hooks[] = {
++static const char *allhooks = "all";
++static const char * const hooks[] = {
+ "log_transaction", /* 0 */
+ "quick_handler", /* 1 */
+ "handler", /* 2 */
+--- httpd-2.4.2/modules/filters/sed1.c
++++ httpd-2.4.2/modules/filters/sed1.c
+@@ -25,7 +25,7 @@
+ #include "apr_strings.h"
+ #include "regexp.h"
+
+-char *trans[040] = {
++static const char *const trans[040] = {
+ "\\01",
+ "\\02",
+ "\\03",
+@@ -58,7 +58,7 @@
+ "\\36",
+ "\\37"
+ };
+-char rub[] = {"\\177"};
++static const char rub[] = {"\\177"};
+
+ extern int sed_step(char *p1, char *p2, int circf, step_vars_storage *vars);
+ static int substitute(sed_eval_t *eval, sed_reptr_t *ipc,
+@@ -692,7 +692,8 @@
+ step_vars_storage *step_vars)
+ {
+ int i;
+- char *p1, *p2, *p3;
++ char *p1, *p2;
++ const char *p3;
+ int length;
+ char sz[32]; /* 32 bytes enough to store 64 bit integer in decimal */
+ apr_status_t rv = APR_SUCCESS;
+--- httpd-2.4.2/modules/filters/config.m4
++++ httpd-2.4.2/modules/filters/config.m4
+@@ -16,7 +16,13 @@
+ APACHE_MODULE(substitute, response content rewrite-like filtering, , , most)
+
+ sed_obj="mod_sed.lo sed0.lo sed1.lo regexp.lo"
+-APACHE_MODULE(sed, filter request and/or response bodies through sed, $sed_obj, , most)
++APACHE_MODULE(sed, filter request and/or response bodies through sed, $sed_obj, , most, [
++ if test "x$enable_sed" = "xshared"; then
++ # The only symbol which needs to be exported is the module
++ # structure, so ask libtool to hide libsed internals:
++ APR_ADDTO(MOD_SED_LDADD, [-export-symbols-regex sed_module])
++ fi
++])
+
+ if test "$ac_cv_ebcdic" = "yes"; then
+ # mod_charset_lite can be very useful on an ebcdic system,
--- /dev/null
+
+* server/mpm_unix.c (dummy_connection): Use a TLS 1.0 close_notify
+ alert if the chosen listener is configured for https; not perfect
+ but better than sending an HTTP request. Adjust comments.
+http://svn.apache.org/viewvc?view=revision&revision=1327036
+
+* server/mpm_unix.c (dummy_connection): Fix spello.
+http://svn.apache.org/viewvc?view=revision&revision=1327080
+
+Upstream-Status: Backport
+
+--- httpd-2.4.2/server/mpm_unix.c
++++ httpd-2.4.2/server/mpm_unix.c
+@@ -501,14 +501,14 @@
+ return rv;
+ }
+
+-/* This function connects to the server, then immediately closes the connection.
+- * This permits the MPM to skip the poll when there is only one listening
+- * socket, because it provides a alternate way to unblock an accept() when
+- * the pod is used.
+- */
++/* This function connects to the server and sends enough data to
++ * ensure the child wakes up and processes a new connection. This
++ * permits the MPM to skip the poll when there is only one listening
++ * socket, because it provides a alternate way to unblock an accept()
++ * when the pod is used. */
+ static apr_status_t dummy_connection(ap_pod_t *pod)
+ {
+- char *srequest;
++ const char *data;
+ apr_status_t rv;
+ apr_socket_t *sock;
+ apr_pool_t *p;
+@@ -574,24 +574,37 @@
+ return rv;
+ }
+
+- /* Create the request string. We include a User-Agent so that
+- * adminstrators can track down the cause of the odd-looking
+- * requests in their logs.
+- */
+- srequest = apr_pstrcat(p, "OPTIONS * HTTP/1.0\r\nUser-Agent: ",
++ if (lp->protocol && strcasecmp(lp->protocol, "https") == 0) {
++ /* Send a TLS 1.0 close_notify alert. This is perhaps the
++ * "least wrong" way to open and cleanly terminate an SSL
++ * connection. It should "work" without noisy error logs if
++ * the server actually expects SSLv3/TLSv1. With
++ * SSLv23_server_method() OpenSSL's SSL_accept() fails
++ * ungracefully on receipt of this message, since it requires
++ * an 11-byte ClientHello message and this is too short. */
++ static const unsigned char tls10_close_notify[7] = {
++ '\x15', /* TLSPlainText.type = Alert (21) */
++ '\x03', '\x01', /* TLSPlainText.version = {3, 1} */
++ '\x00', '\x02', /* TLSPlainText.length = 2 */
++ '\x01', /* Alert.level = warning (1) */
++ '\x00' /* Alert.description = close_notify (0) */
++ };
++ data = (const char *)tls10_close_notify;
++ len = sizeof(tls10_close_notify);
++ }
++ else /* ... XXX other request types here? */ {
++ /* Create an HTTP request string. We include a User-Agent so
++ * that adminstrators can track down the cause of the
++ * odd-looking requests in their logs. A complete request is
++ * used since kernel-level filtering may require that much
++ * data before returning from accept(). */
++ data = apr_pstrcat(p, "OPTIONS * HTTP/1.0\r\nUser-Agent: ",
+ ap_get_server_description(),
+ " (internal dummy connection)\r\n\r\n", NULL);
++ len = strlen(data);
++ }
+
+- /* Since some operating systems support buffering of data or entire
+- * requests in the kernel, we send a simple request, to make sure
+- * the server pops out of a blocking accept().
+- */
+- /* XXX: This is HTTP specific. We should look at the Protocol for each
+- * listener, and send the correct type of request to trigger any Accept
+- * Filters.
+- */
+- len = strlen(srequest);
+- apr_socket_send(sock, srequest, &len);
++ apr_socket_send(sock, data, &len);
+ apr_socket_close(sock);
+ apr_pool_destroy(p);
+
--- /dev/null
+Add support for TLS Next Protocol Negotiation:
+
+* modules/ssl/mod_ssl.c, modules/ssl/mod_ssl.h: Add and implement new
+ hooks for next protocol advertisement/discovery.
+
+* modules/ssl/ssl_engine_init.c (ssl_init_ctx_callbacks): Enable
+ NPN advertisement callback in handshake.
+
+* modules/ssl/ssl_engine_io.c (ssl_io_filter_input): Invoke
+ next-protocol discovery hook.
+
+* modules/ssl/ssl_engine_kernel.c (ssl_callback_AdvertiseNextProtos):
+ New callback.
+
+* modules/ssl/ssl_private.h: Add prototype.
+
+Submitted by: Matthew Steele <mdsteele google.com>
+ with slight tweaks by jorton
+
+https://bugzilla.redhat.com//show_bug.cgi?id=809599
+
+http://svn.apache.org/viewvc?view=revision&revision=1332643
+
+Upstream-Status: Backport
+
+--- httpd-2.4.2/modules/ssl/ssl_private.h
++++ httpd-2.4.2/modules/ssl/ssl_private.h
+@@ -139,6 +139,11 @@
+ #define HAVE_FIPS
+ #endif
+
++#if OPENSSL_VERSION_NUMBER >= 0x10001000L && !defined(OPENSSL_NO_NEXTPROTONEG) \
++ && !defined(OPENSSL_NO_TLSEXT)
++#define HAVE_TLS_NPN
++#endif
++
+ #if (OPENSSL_VERSION_NUMBER >= 0x10000000)
+ #define MODSSL_SSL_CIPHER_CONST const
+ #define MODSSL_SSL_METHOD_CONST const
+@@ -811,6 +816,7 @@
+ int ssl_callback_SessionTicket(SSL *, unsigned char *, unsigned char *,
+ EVP_CIPHER_CTX *, HMAC_CTX *, int);
+ #endif
++int ssl_callback_AdvertiseNextProtos(SSL *ssl, const unsigned char **data, unsigned int *len, void *arg);
+
+ /** Session Cache Support */
+ void ssl_scache_init(server_rec *, apr_pool_t *);
+--- httpd-2.4.2/modules/ssl/mod_ssl.c
++++ httpd-2.4.2/modules/ssl/mod_ssl.c
+@@ -260,6 +260,18 @@
+ AP_END_CMD
+ };
+
++/* Implement 'modssl_run_npn_advertise_protos_hook'. */
++APR_IMPLEMENT_OPTIONAL_HOOK_RUN_ALL(
++ modssl, AP, int, npn_advertise_protos_hook,
++ (conn_rec *connection, apr_array_header_t *protos),
++ (connection, protos), OK, DECLINED);
++
++/* Implement 'modssl_run_npn_proto_negotiated_hook'. */
++APR_IMPLEMENT_OPTIONAL_HOOK_RUN_ALL(
++ modssl, AP, int, npn_proto_negotiated_hook,
++ (conn_rec *connection, const char *proto_name, apr_size_t proto_name_len),
++ (connection, proto_name, proto_name_len), OK, DECLINED);
++
+ /*
+ * the various processing hooks
+ */
+--- httpd-2.4.2/modules/ssl/mod_ssl.h
++++ httpd-2.4.2/modules/ssl/mod_ssl.h
+@@ -63,5 +63,26 @@
+
+ APR_DECLARE_OPTIONAL_FN(int, ssl_engine_disable, (conn_rec *));
+
++/** The npn_advertise_protos optional hook allows other modules to add entries
++ * to the list of protocol names advertised by the server during the Next
++ * Protocol Negotiation (NPN) portion of the SSL handshake. The hook callee is
++ * given the connection and an APR array; it should push one or more char*'s
++ * pointing to null-terminated strings (such as "http/1.1" or "spdy/2") onto
++ * the array and return OK, or do nothing and return DECLINED. */
++APR_DECLARE_EXTERNAL_HOOK(modssl, AP, int, npn_advertise_protos_hook,
++ (conn_rec *connection, apr_array_header_t *protos));
++
++/** The npn_proto_negotiated optional hook allows other modules to discover the
++ * name of the protocol that was chosen during the Next Protocol Negotiation
++ * (NPN) portion of the SSL handshake. Note that this may be the empty string
++ * (in which case modules should probably assume HTTP), or it may be a protocol
++ * that was never even advertised by the server. The hook callee is given the
++ * connection, a non-null-terminated string containing the protocol name, and
++ * the length of the string; it should do something appropriate (i.e. insert or
++ * remove filters) and return OK, or do nothing and return DECLINED. */
++APR_DECLARE_EXTERNAL_HOOK(modssl, AP, int, npn_proto_negotiated_hook,
++ (conn_rec *connection, const char *proto_name,
++ apr_size_t proto_name_len));
++
+ #endif /* __MOD_SSL_H__ */
+ /** @} */
+--- httpd-2.4.2/modules/ssl/ssl_engine_init.c
++++ httpd-2.4.2/modules/ssl/ssl_engine_init.c
+@@ -681,6 +681,11 @@
+ #endif
+
+ SSL_CTX_set_info_callback(ctx, ssl_callback_Info);
++
++#ifdef HAVE_TLS_NPN
++ SSL_CTX_set_next_protos_advertised_cb(
++ ctx, ssl_callback_AdvertiseNextProtos, NULL);
++#endif
+ }
+
+ static void ssl_init_ctx_verify(server_rec *s,
+--- httpd-2.4.2/modules/ssl/ssl_engine_io.c
++++ httpd-2.4.2/modules/ssl/ssl_engine_io.c
+@@ -28,6 +28,7 @@
+ core keeps dumping.''
+ -- Unknown */
+ #include "ssl_private.h"
++#include "mod_ssl.h"
+ #include "apr_date.h"
+
+ /* _________________________________________________________________
+@@ -297,6 +298,7 @@
+ apr_pool_t *pool;
+ char buffer[AP_IOBUFSIZE];
+ ssl_filter_ctx_t *filter_ctx;
++ int npn_finished; /* 1 if NPN has finished, 0 otherwise */
+ } bio_filter_in_ctx_t;
+
+ /*
+@@ -1374,6 +1376,27 @@
+ APR_BRIGADE_INSERT_TAIL(bb, bucket);
+ }
+
++#ifdef HAVE_TLS_NPN
++ /* By this point, Next Protocol Negotiation (NPN) should be completed (if
++ * our version of OpenSSL supports it). If we haven't already, find out
++ * which protocol was decided upon and inform other modules by calling
++ * npn_proto_negotiated_hook. */
++ if (!inctx->npn_finished) {
++ const unsigned char *next_proto = NULL;
++ unsigned next_proto_len = 0;
++
++ SSL_get0_next_proto_negotiated(
++ inctx->ssl, &next_proto, &next_proto_len);
++ ap_log_cerror(APLOG_MARK, APLOG_DEBUG, APR_SUCCESS, f->c,
++ "SSL NPN negotiated protocol: '%s'",
++ apr_pstrmemdup(f->c->pool, (const char*)next_proto,
++ next_proto_len));
++ modssl_run_npn_proto_negotiated_hook(
++ f->c, (const char*)next_proto, next_proto_len);
++ inctx->npn_finished = 1;
++ }
++#endif
++
+ return APR_SUCCESS;
+ }
+
+@@ -1855,6 +1878,7 @@
+ inctx->block = APR_BLOCK_READ;
+ inctx->pool = c->pool;
+ inctx->filter_ctx = filter_ctx;
++ inctx->npn_finished = 0;
+ }
+
+ /* The request_rec pointer is passed in here only to ensure that the
+--- httpd-2.4.2/modules/ssl/ssl_engine_kernel.c
++++ httpd-2.4.2/modules/ssl/ssl_engine_kernel.c
+@@ -29,6 +29,7 @@
+ time I was too famous.''
+ -- Unknown */
+ #include "ssl_private.h"
++#include "mod_ssl.h"
+ #include "util_md5.h"
+
+ static void ssl_configure_env(request_rec *r, SSLConnRec *sslconn);
+@@ -2143,3 +2144,84 @@
+ return -1;
+ }
+ #endif
++
++#ifdef HAVE_TLS_NPN
++/*
++ * This callback function is executed when SSL needs to decide what protocols
++ * to advertise during Next Protocol Negotiation (NPN). It must produce a
++ * string in wire format -- a sequence of length-prefixed strings -- indicating
++ * the advertised protocols. Refer to SSL_CTX_set_next_protos_advertised_cb
++ * in OpenSSL for reference.
++ */
++int ssl_callback_AdvertiseNextProtos(SSL *ssl, const unsigned char **data_out,
++ unsigned int *size_out, void *arg)
++{
++ conn_rec *c = (conn_rec*)SSL_get_app_data(ssl);
++ apr_array_header_t *protos;
++ int num_protos;
++ unsigned int size;
++ int i;
++ unsigned char *data;
++ unsigned char *start;
++
++ *data_out = NULL;
++ *size_out = 0;
++
++ /* If the connection object is not available, then there's nothing for us
++ * to do. */
++ if (c == NULL) {
++ return SSL_TLSEXT_ERR_OK;
++ }
++
++ /* Invoke our npn_advertise_protos hook, giving other modules a chance to
++ * add alternate protocol names to advertise. */
++ protos = apr_array_make(c->pool, 0, sizeof(char*));
++ modssl_run_npn_advertise_protos_hook(c, protos);
++ num_protos = protos->nelts;
++
++ /* We now have a list of null-terminated strings; we need to concatenate
++ * them together into a single string, where each protocol name is prefixed
++ * by its length. First, calculate how long that string will be. */
++ size = 0;
++ for (i = 0; i < num_protos; ++i) {
++ const char *string = APR_ARRAY_IDX(protos, i, const char*);
++ unsigned int length = strlen(string);
++ /* If the protocol name is too long (the length must fit in one byte),
++ * then log an error and skip it. */
++ if (length > 255) {
++ ap_log_cerror(APLOG_MARK, APLOG_ERR, 0, c,
++ "SSL NPN protocol name too long (length=%u): %s",
++ length, string);
++ continue;
++ }
++ /* Leave room for the length prefix (one byte) plus the protocol name
++ * itself. */
++ size += 1 + length;
++ }
++
++ /* If there is nothing to advertise (either because no modules added
++ * anything to the protos array, or because all strings added to the array
++ * were skipped), then we're done. */
++ if (size == 0) {
++ return SSL_TLSEXT_ERR_OK;
++ }
++
++ /* Now we can build the string. Copy each protocol name string into the
++ * larger string, prefixed by its length. */
++ data = apr_palloc(c->pool, size * sizeof(unsigned char));
++ start = data;
++ for (i = 0; i < num_protos; ++i) {
++ const char *string = APR_ARRAY_IDX(protos, i, const char*);
++ apr_size_t length = strlen(string);
++ *start = (unsigned char)length;
++ ++start;
++ memcpy(start, string, length * sizeof(unsigned char));
++ start += length;
++ }
++
++ /* Success. */
++ *data_out = data;
++ *size_out = size;
++ return SSL_TLSEXT_ERR_OK;
++}
++#endif
--- /dev/null
+
+* support/suexec.c: Add gcc format-string attributes to logging
+ functions.
+ (main): Always print uid/gid as unsigned long, and cast to avoid
+ warnings (which somewhat defeats the point of the format string
+ attrs, but is necessary since the size of gid/uid varies).
+http://svn.apache.org/viewvc?view=revision&revision=1337344
+
+
+
+suexec: Add support for logging to syslog as an alternative to a
+logfile.
+
+* support/suexec.c (err_output) [AP_LOG_SYSLOG]: Log to syslog.
+ (main): Close syslog fd if open, before execv. Add -V output
+ for AP_LOG_SYSLOG.
+
+* configure.in: Add --with-suexec-syslog argument; allow
+ --without-suexec-logfile to omit definition of AP_LOG_EXEC.
+
+http://svn.apache.org/viewvc?view=revision&revision=1341905
+
+
+
+suexec: Support use of setgid/setuid capability bits on Linux, a
+weaker set of privileges than the full setuid/setgid root binary.
+
+* configure.in: Add --enable-suexec-capabilites flag.
+
+* Makefile.in: If configured, use setcap instead of chmod 7555 on
+ installed suexec binary.
+
+* modules/arch/unix/mod_unixd.c (unixd_pre_config): Drop test for
+ setuid bit if capability bits are used.
+
+* docs/manual/: Add docs.
+
+http://svn.apache.org/viewvc?view=revision&revision=1342065
+
+
+
+* docs/manual/suexec.html.en: Update for syslog logging.
+
+http://svn.apache.org/viewvc?view=revision&revision=1341930
+
+
+
+Upstream-Status: Backport
+
+--- httpd-2.4.2/configure.in.r1337344+
++++ httpd-2.4.2/configure.in
+@@ -700,7 +700,24 @@ APACHE_HELP_STRING(--with-suexec-gidmin,
+
+ AC_ARG_WITH(suexec-logfile,
+ APACHE_HELP_STRING(--with-suexec-logfile,Set the logfile),[
+- AC_DEFINE_UNQUOTED(AP_LOG_EXEC, "$withval", [SuExec log file] ) ] )
++ if test "x$withval" = "xyes"; then
++ AC_DEFINE_UNQUOTED(AP_LOG_EXEC, "$withval", [SuExec log file])
++ fi
++])
++
++AC_ARG_WITH(suexec-syslog,
++APACHE_HELP_STRING(--with-suexec-syslog,Set the logfile),[
++ if test $withval = "yes"; then
++ if test "x${with_suexec_logfile}" != "xno"; then
++ AC_MSG_NOTICE([hint: use "--without-suexec-logfile --with-suexec-syslog"])
++ AC_MSG_ERROR([suexec does not support both logging to file and syslog])
++ fi
++ AC_CHECK_FUNCS([vsyslog], [], [
++ AC_MSG_ERROR([cannot support syslog from suexec without vsyslog()])])
++ AC_DEFINE(AP_LOG_SYSLOG, 1, [SuExec log to syslog])
++ fi
++])
++
+
+ AC_ARG_WITH(suexec-safepath,
+ APACHE_HELP_STRING(--with-suexec-safepath,Set the safepath),[
+@@ -710,6 +727,15 @@ AC_ARG_WITH(suexec-umask,
+ APACHE_HELP_STRING(--with-suexec-umask,umask for suexec'd process),[
+ AC_DEFINE_UNQUOTED(AP_SUEXEC_UMASK, 0$withval, [umask for suexec'd process] ) ] )
+
++INSTALL_SUEXEC=setuid
++AC_ARG_ENABLE([suexec-capabilities],
++APACHE_HELP_STRING(--enable-suexec-capabilities,Use Linux capability bits not setuid root suexec), [
++INSTALL_SUEXEC=caps
++AC_DEFINE(AP_SUEXEC_CAPABILITIES, 1,
++ [Enable if suexec is installed with Linux capabilities, not setuid])
++])
++APACHE_SUBST(INSTALL_SUEXEC)
++
+ dnl APR should go after the other libs, so the right symbols can be picked up
+ if test x${apu_found} != xobsolete; then
+ AP_LIBS="$AP_LIBS `$apu_config --avoid-ldap --link-libtool`"
+--- httpd-2.4.2/docs/manual/suexec.html.en.r1337344+
++++ httpd-2.4.2/docs/manual/suexec.html.en
+@@ -369,6 +369,21 @@
+ together with the <code>--enable-suexec</code> option to let
+ APACI accept your request for using the suEXEC feature.</dd>
+
++ <dt><code>--enable-suexec-capabilities</code></dt>
++
++ <dd><strong>Linux specific:</strong> Normally,
++ the <code>suexec</code> binary is installed "setuid/setgid
++ root", which allows it to run with the full privileges of the
++ root user. If this option is used, the <code>suexec</code>
++ binary will instead be installed with only the setuid/setgid
++ "capability" bits set, which is the subset of full root
++ priviliges required for suexec operation. Note that
++ the <code>suexec</code> binary may not be able to write to a log
++ file in this mode; it is recommended that the
++ <code>--with-suexec-syslog --without-suexec-logfile</code>
++ options are used in conjunction with this mode, so that syslog
++ logging is used instead.</dd>
++
+ <dt><code>--with-suexec-bin=<em>PATH</em></code></dt>
+
+ <dd>The path to the <code>suexec</code> binary must be hard-coded
+@@ -430,6 +445,12 @@
+ "<code>suexec_log</code>" and located in your standard logfile
+ directory (<code>--logfiledir</code>).</dd>
+
++ <dt><code>--with-suexec-syslog</code></dt>
++
++ <dd>If defined, suexec will log notices and errors to syslog
++ instead of a logfile. This option must be combined
++ with <code>--without-suexec-logfile</code>.</dd>
++
+ <dt><code>--with-suexec-safepath=<em>PATH</em></code></dt>
+
+ <dd>Define a safe PATH environment to pass to CGI
+@@ -546,9 +567,12 @@
+
+ <p>The suEXEC wrapper will write log information
+ to the file defined with the <code>--with-suexec-logfile</code>
+- option as indicated above. If you feel you have configured and
+- installed the wrapper properly, have a look at this log and the
+- error_log for the server to see where you may have gone astray.</p>
++ option as indicated above, or to syslog if <code>--with-suexec-syslog</code>
++ is used. If you feel you have configured and
++ installed the wrapper properly, have a look at the log and the
++ error_log for the server to see where you may have gone astray.
++ The output of <code>"suexec -V"</code> will show the options
++ used to compile suexec, if using a binary distribution.</p>
+
+ </div><div class="top"><a href="#page-header"><img alt="top" src="./images/up.gif" /></a></div>
+ <div class="section">
+@@ -615,4 +639,4 @@
+ </div><div id="footer">
+ <p class="apache">Copyright 2012 The Apache Software Foundation.<br />Licensed under the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache License, Version 2.0</a>.</p>
+ <p class="menu"><a href="./mod/">Modules</a> | <a href="./mod/directives.html">Directives</a> | <a href="./faq/">FAQ</a> | <a href="./glossary.html">Glossary</a> | <a href="./sitemap.html">Sitemap</a></p></div>
+-</body></html>
+\ No newline at end of file
++</body></html>
+--- httpd-2.4.2/Makefile.in.r1337344+
++++ httpd-2.4.2/Makefile.in
+@@ -236,11 +236,22 @@ install-man:
+ cd $(DESTDIR)$(manualdir) && find . -name ".svn" -type d -print | xargs rm -rf 2>/dev/null || true; \
+ fi
+
+-install-suexec:
++install-suexec: install-suexec-binary install-suexec-$(INSTALL_SUEXEC)
++
++install-suexec-binary:
+ @if test -f $(builddir)/support/suexec; then \
+ test -d $(DESTDIR)$(sbindir) || $(MKINSTALLDIRS) $(DESTDIR)$(sbindir); \
+ $(INSTALL_PROGRAM) $(top_builddir)/support/suexec $(DESTDIR)$(sbindir); \
+- chmod 4755 $(DESTDIR)$(sbindir)/suexec; \
++ fi
++
++install-suexec-setuid:
++ @if test -f $(builddir)/support/suexec; then \
++ chmod 4755 $(DESTDIR)$(sbindir)/suexec; \
++ fi
++
++install-suexec-caps:
++ @if test -f $(builddir)/support/suexec; then \
++ setcap 'cap_setuid,cap_setgid+pe' $(DESTDIR)$(sbindir)/suexec; \
+ fi
+
+ suexec:
+--- httpd-2.4.2/modules/arch/unix/mod_unixd.c.r1337344+
++++ httpd-2.4.2/modules/arch/unix/mod_unixd.c
+@@ -284,6 +284,13 @@ unixd_set_suexec(cmd_parms *cmd, void *d
+ return NULL;
+ }
+
++#ifdef AP_SUEXEC_CAPABILITIES
++/* If suexec is using capabilities, don't test for the setuid bit. */
++#define SETUID_TEST(finfo) (1)
++#else
++#define SETUID_TEST(finfo) (finfo.protection & APR_USETID)
++#endif
++
+ static int
+ unixd_pre_config(apr_pool_t *pconf, apr_pool_t *plog,
+ apr_pool_t *ptemp)
+@@ -300,7 +307,7 @@ unixd_pre_config(apr_pool_t *pconf, apr_
+ ap_unixd_config.suexec_enabled = 0;
+ if ((apr_stat(&wrapper, SUEXEC_BIN, APR_FINFO_NORM, ptemp))
+ == APR_SUCCESS) {
+- if ((wrapper.protection & APR_USETID) && wrapper.user == 0
++ if (SETUID_TEST(wrapper) && wrapper.user == 0
+ && (access(SUEXEC_BIN, R_OK|X_OK) == 0)) {
+ ap_unixd_config.suexec_enabled = 1;
+ ap_unixd_config.suexec_disabled_reason = "";
+--- httpd-2.4.2/support/suexec.c.r1337344+
++++ httpd-2.4.2/support/suexec.c
+@@ -58,6 +58,10 @@
+ #include <grp.h>
+ #endif
+
++#ifdef AP_LOG_SYSLOG
++#include <syslog.h>
++#endif
++
+ #if defined(PATH_MAX)
+ #define AP_MAXPATH PATH_MAX
+ #elif defined(MAXPATHLEN)
+@@ -69,7 +73,12 @@
+ #define AP_ENVBUF 256
+
+ extern char **environ;
++
++#ifdef AP_LOG_SYSLOG
++static int log_open;
++#else
+ static FILE *log = NULL;
++#endif
+
+ static const char *const safe_env_lst[] =
+ {
+@@ -128,10 +137,23 @@ static const char *const safe_env_lst[]
+ NULL
+ };
+
++static void log_err(const char *fmt,...)
++ __attribute__((format(printf,1,2)));
++static void log_no_err(const char *fmt,...)
++ __attribute__((format(printf,1,2)));
++static void err_output(int is_error, const char *fmt, va_list ap)
++ __attribute__((format(printf,2,0)));
+
+ static void err_output(int is_error, const char *fmt, va_list ap)
+ {
+-#ifdef AP_LOG_EXEC
++#if defined(AP_LOG_SYSLOG)
++ if (!log_open) {
++ openlog("suexec", LOG_PID, LOG_DAEMON);
++ log_open = 1;
++ }
++
++ vsyslog(is_error ? LOG_ERR : LOG_INFO, fmt, ap);
++#elif defined(AP_LOG_EXEC)
+ time_t timevar;
+ struct tm *lt;
+
+@@ -263,7 +285,7 @@ int main(int argc, char *argv[])
+ */
+ uid = getuid();
+ if ((pw = getpwuid(uid)) == NULL) {
+- log_err("crit: invalid uid: (%ld)\n", uid);
++ log_err("crit: invalid uid: (%lu)\n", (unsigned long)uid);
+ exit(102);
+ }
+ /*
+@@ -289,7 +311,9 @@ int main(int argc, char *argv[])
+ #ifdef AP_HTTPD_USER
+ fprintf(stderr, " -D AP_HTTPD_USER=\"%s\"\n", AP_HTTPD_USER);
+ #endif
+-#ifdef AP_LOG_EXEC
++#if defined(AP_LOG_SYSLOG)
++ fprintf(stderr, " -D AP_LOG_SYSLOG\n");
++#elif defined(AP_LOG_EXEC)
+ fprintf(stderr, " -D AP_LOG_EXEC=\"%s\"\n", AP_LOG_EXEC);
+ #endif
+ #ifdef AP_SAFE_PATH
+@@ -440,7 +464,7 @@ int main(int argc, char *argv[])
+ * a UID less than AP_UID_MIN. Tsk tsk.
+ */
+ if ((uid == 0) || (uid < AP_UID_MIN)) {
+- log_err("cannot run as forbidden uid (%d/%s)\n", uid, cmd);
++ log_err("cannot run as forbidden uid (%lu/%s)\n", (unsigned long)uid, cmd);
+ exit(107);
+ }
+
+@@ -449,7 +473,7 @@ int main(int argc, char *argv[])
+ * or as a GID less than AP_GID_MIN. Tsk tsk.
+ */
+ if ((gid == 0) || (gid < AP_GID_MIN)) {
+- log_err("cannot run as forbidden gid (%d/%s)\n", gid, cmd);
++ log_err("cannot run as forbidden gid (%lu/%s)\n", (unsigned long)gid, cmd);
+ exit(108);
+ }
+
+@@ -460,7 +484,7 @@ int main(int argc, char *argv[])
+ * and setgid() to the target group. If unsuccessful, error out.
+ */
+ if (((setgid(gid)) != 0) || (initgroups(actual_uname, gid) != 0)) {
+- log_err("failed to setgid (%ld: %s)\n", gid, cmd);
++ log_err("failed to setgid (%lu: %s)\n", (unsigned long)gid, cmd);
+ exit(109);
+ }
+
+@@ -468,7 +492,7 @@ int main(int argc, char *argv[])
+ * setuid() to the target user. Error out on fail.
+ */
+ if ((setuid(uid)) != 0) {
+- log_err("failed to setuid (%ld: %s)\n", uid, cmd);
++ log_err("failed to setuid (%lu: %s)\n", (unsigned long)uid, cmd);
+ exit(110);
+ }
+
+@@ -556,11 +580,11 @@ int main(int argc, char *argv[])
+ (gid != dir_info.st_gid) ||
+ (uid != prg_info.st_uid) ||
+ (gid != prg_info.st_gid)) {
+- log_err("target uid/gid (%ld/%ld) mismatch "
+- "with directory (%ld/%ld) or program (%ld/%ld)\n",
+- uid, gid,
+- dir_info.st_uid, dir_info.st_gid,
+- prg_info.st_uid, prg_info.st_gid);
++ log_err("target uid/gid (%lu/%lu) mismatch "
++ "with directory (%lu/%lu) or program (%lu/%lu)\n",
++ (unsigned long)uid, (unsigned long)gid,
++ (unsigned long)dir_info.st_uid, (unsigned long)dir_info.st_gid,
++ (unsigned long)prg_info.st_uid, (unsigned long)prg_info.st_gid);
+ exit(120);
+ }
+ /*
+@@ -585,6 +609,12 @@ int main(int argc, char *argv[])
+ #endif /* AP_SUEXEC_UMASK */
+
+ /* Be sure to close the log file so the CGI can't mess with it. */
++#ifdef AP_LOG_SYSLOG
++ if (log_open) {
++ closelog();
++ log_open = 0;
++ }
++#else
+ if (log != NULL) {
+ #if APR_HAVE_FCNTL_H
+ /*
+@@ -606,6 +636,7 @@ int main(int argc, char *argv[])
+ log = NULL;
+ #endif
+ }
++#endif
+
+ /*
+ * Execute the command, replacing our image with its own.
--- /dev/null
+
+* server/main.c (main): Bail out *before* signalling the server
+ if the config is bad. (as per the claim in the docs!)
+
+https://bugzilla.redhat.com/show_bug.cgi?id=814645
+http://svn.apache.org/viewvc?view=revision&revision=1328345
+
+Upstream-Status: Backport
+
+--- httpd-2.4.2/server/main.c.restart
++++ httpd-2.4.2/server/main.c
+@@ -671,6 +671,11 @@ int main(int argc, const char * const ar
+ }
+ }
+
++ /* If our config failed, deal with that here. */
++ if (rv != OK) {
++ destroy_and_exit_process(process, 1);
++ }
++
+ signal_server = APR_RETRIEVE_OPTIONAL_FN(ap_signal_server);
+ if (signal_server) {
+ int exit_status;
+@@ -680,11 +685,6 @@ int main(int argc, const char * const ar
+ }
+ }
+
+- /* If our config failed, deal with that here. */
+- if (rv != OK) {
+- destroy_and_exit_process(process, 1);
+- }
+-
+ apr_pool_clear(plog);
+
+ if ( ap_run_open_logs(pconf, plog, ptemp, ap_server_conf) != OK) {
--- /dev/null
+From 760ccbb2fb046621a2aeaecabb2b1ef9aa280cf1 Mon Sep 17 00:00:00 2001
+From: Yulong Pei <Yulong.pei@windriver.com>
+Date: Thu, 1 Sep 2011 01:03:14 +0800
+Subject: [PATCH] replace lynx to curl in apachectl script
+
+Upstream-Status: Inappropriate [configuration]
+
+Signed-off-by: Yulong Pei <Yulong.pei@windriver.com>
+---
+ support/apachectl.in | 14 ++++++++++----
+ 1 files changed, 10 insertions(+), 4 deletions(-)
+
+diff --git a/support/apachectl.in b/support/apachectl.in
+index d4dff38..109ea13 100644
+--- a/support/apachectl.in
++++ b/support/apachectl.in
+@@ -51,11 +51,11 @@ fi
+ # a command that outputs a formatted text version of the HTML at the
+ # url given on the command line. Designed for lynx, however other
+ # programs may work.
+-LYNX="@LYNX_PATH@ -dump"
++CURL="/usr/bin/curl"
+ #
+ # the URL to your server's mod_status status page. If you do not
+ # have one, then status and fullstatus will not work.
+-STATUSURL="http://localhost:@PORT@/server-status"
++STATUSURL="http://localhost:@PORT@/"
+ #
+ # Set this variable to a command that increases the maximum
+ # number of file descriptors allowed per child process. This is
+@@ -91,10 +91,16 @@ configtest)
+ ERROR=$?
+ ;;
+ status)
+- $LYNX $STATUSURL | awk ' /process$/ { print; exit } { print } '
++ $CURL -s $STATUSURL | grep -o "It works!"
++ if [ $? != 0 ] ; then
++ echo The httpd server does not work!
++ fi
+ ;;
+ fullstatus)
+- $LYNX $STATUSURL
++ $CURL -s $STATUSURL | grep -o "It works!"
++ if [ $? != 0 ] ; then
++ echo The httpd server does not work!
++ fi
+ ;;
+ *)
+ $HTTPD $ARGV
+--
+1.6.4
+
--- /dev/null
+--- http-2.0.54/server/Makefile.in-old 2005-12-20 13:26:56.000000000 -0500
++++ http-2.0.54/server/Makefile.in 2005-12-20 13:27:22.000000000 -0500
+@@ -27,7 +27,7 @@
+ $(LINK) $(EXTRA_LDFLAGS) $(gen_test_char_OBJECTS) $(EXTRA_LIBS)
+
+ test_char.h: gen_test_char
+- ./gen_test_char > test_char.h
++ gen_test_char > test_char.h
+
+ util.lo: test_char.h
+
--- /dev/null
+DESCRIPTION = "The Apache HTTP Server is a powerful, efficient, and \
+extensible web server."
+SUMMARY = "Apache HTTP Server"
+HOMEPAGE = "http://httpd.apache.org/"
+DEPENDS = "expat-native pcre-native apr-native apr-util-native"
+SECTION = "net"
+LICENSE = "Apache-2.0"
+PR = "r0"
+
+inherit native
+
+SRC_URI = "http://www.apache.org/dist/httpd/httpd-${PV}.tar.bz2"
+
+S = "${WORKDIR}/httpd-${PV}"
+
+LIC_FILES_CHKSUM = "file://LICENSE;md5=eff226ae95d0516d6210ed77dfdf2dcc"
+SRC_URI[md5sum] = "6bb12f726e22656f0ad2baf91f1f8329"
+SRC_URI[sha256sum] = "5382f9c507d3d02706e33d6308ea041f39e8511b5948aef0ca188df8f90159b8"
+
+do_configure () {
+ ./configure --with-apr=${STAGING_BINDIR_CROSS}/apr-1-config \
+ --with-apr-util=${STAGING_BINDIR_CROSS}/apu-1-config \
+ --prefix=${prefix} --datadir=${datadir}/apache2
+}
+
+do_install () {
+ install -d ${D}${bindir} ${D}${libdir}
+ cp server/gen_test_char ${D}${bindir}
+ install -m 755 support/apxs ${D}${bindir}/
+ install -m 755 httpd ${D}${bindir}/
+ install -d ${D}${datadir}/apache2/build
+ cp build/*.mk ${D}${datadir}/apache2/build
+ cp build/instdso.sh ${D}${datadir}/apache2/build
+
+ install -d ${D}${includedir}/apache2
+ cp include/* ${D}${includedir}/apache2
+ cp os/unix/os.h ${D}${includedir}/apache2
+ cp os/unix/unixd.h ${D}${includedir}/apache2
+
+ cp support/envvars-std ${D}${bindir}/envvars
+ chmod 755 ${D}${bindir}/envvars
+}
+
--- /dev/null
+DESCRIPTION = "The Apache HTTP Server is a powerful, efficient, and \
+extensible web server."
+SUMMARY = "Apache HTTP Server"
+HOMEPAGE = "http://httpd.apache.org/"
+DEPENDS = "libtool-native apache2-native openssl expat pcre apr apr-util"
+RDEPENDS_${PN} += "openssl libgcc"
+SECTION = "net"
+LICENSE = "Apache-2.0"
+PR = "r0"
+
+SRC_URI = "http://www.apache.org/dist/httpd/httpd-${PV}.tar.bz2 \
+ file://server-makefile.patch \
+ file://fix-libtool-name.patch \
+ file://httpd-2.4.1-corelimit.patch \
+ file://httpd-2.4.1-export.patch \
+ file://httpd-2.4.1-selinux.patch \
+ file://httpd-2.4.2-r1326980+.patch \
+ file://httpd-2.4.2-r1327036+.patch \
+ file://httpd-2.4.2-r1332643.patch \
+ file://httpd-2.4.2-r1337344+.patch \
+ file://httpd-2.4.2-restart.patch \
+ file://apache-configure_perlbin.patch \
+ file://replace-lynx-to-curl-in-apachectl-script.patch \
+ file://apache-ssl-ltmain-rpath.patch \
+ file://init"
+
+LIC_FILES_CHKSUM = "file://LICENSE;md5=eff226ae95d0516d6210ed77dfdf2dcc"
+SRC_URI[md5sum] = "6bb12f726e22656f0ad2baf91f1f8329"
+SRC_URI[sha256sum] = "5382f9c507d3d02706e33d6308ea041f39e8511b5948aef0ca188df8f90159b8"
+
+S = "${WORKDIR}/httpd-${PV}"
+
+inherit autotools update-rc.d
+
+CFLAGS_append = " -DPATH_MAX=4096"
+CFLAGS_prepend = "-I${STAGING_INCDIR}/openssl "
+EXTRA_OECONF = "--enable-ssl \
+ --with-ssl=${STAGING_LIBDIR}/.. \
+ --with-expat=${STAGING_LIBDIR}/.. \
+ --with-apr=${STAGING_BINDIR_CROSS}/apr-1-config \
+ --with-apr-util=${STAGING_BINDIR_CROSS}/apu-1-config \
+ --enable-info \
+ --enable-rewrite \
+ --with-dbm=sdbm \
+ --with-berkeley-db=no \
+ --localstatedir=/var/${PN} \
+ --with-gdbm=no \
+ --with-ndbm=no \
+ --includedir=${includedir}/${PN} \
+ --datadir=${datadir}/${PN} \
+ --sysconfdir=${sysconfdir}/${PN} \
+ --libexecdir=${libdir}/${PN}/modules \
+ ap_cv_void_ptr_lt_long=no \
+ --enable-mpms-shared \
+ ac_cv_have_threadsafe_pollset=no"
+
+do_install_append() {
+ install -d ${D}/${sysconfdir}/init.d
+ cat ${WORKDIR}/init | \
+ sed -e 's,/usr/sbin/,${sbindir}/,g' \
+ -e 's,/usr/bin/,${bindir}/,g' \
+ -e 's,/usr/lib,${libdir}/,g' \
+ -e 's,/etc/,${sysconfdir}/,g' \
+ -e 's,/usr/,${prefix}/,g' > ${D}/${sysconfdir}/init.d/${PN}
+ chmod 755 ${D}/${sysconfdir}/init.d/${PN}
+ # remove the goofy original files...
+ rm -rf ${D}/${sysconfdir}/${PN}/original
+ # Expat should be found in the staging area via DEPENDS...
+ rm -f ${D}/${libdir}/libexpat.*
+
+ # Ensure configuration file pulls in modules.d
+ printf "\nInclude ${sysconfdir}/${PN}/modules.d/*\n\n" >> ${D}/${sysconfdir}/${PN}/httpd.conf
+}
+
+SYSROOT_PREPROCESS_FUNCS += "apache_sysroot_preprocess"
+
+apache_sysroot_preprocess () {
+ install -d ${SYSROOT_DESTDIR}${bindir_crossscripts}/
+ install -m 755 ${D}${bindir}/apxs ${SYSROOT_DESTDIR}${bindir_crossscripts}/
+ sed -i 's!my $installbuilddir = .*!my $installbuilddir = "${STAGING_DIR_HOST}/${datadir}/${PN}/build";!' ${SYSROOT_DESTDIR}${bindir_crossscripts}/apxs
+ sed -i 's!my $libtool = .*!my $libtool = "${STAGING_BINDIR_CROSS}/${TARGET_PREFIX}libtool";!' ${SYSROOT_DESTDIR}${bindir_crossscripts}/apxs
+
+ sed -i 's!^APR_CONFIG = .*!APR_CONFIG = ${STAGING_BINDIR_CROSS}/apr-1-config!' ${SYSROOT_DESTDIR}${datadir}/${PN}/build/config_vars.mk
+ sed -i 's!^APU_CONFIG = .*!APU_CONFIG = ${STAGING_BINDIR_CROSS}/apu-1-config!' ${SYSROOT_DESTDIR}${datadir}/${PN}/build/config_vars.mk
+}
+
+#
+# implications - used by update-rc.d scripts
+#
+INITSCRIPT_NAME = "apache2"
+INITSCRIPT_PARAMS = "defaults 91 20"
+LEAD_SONAME = "libapr-1.so.0"
+
+CONFFILES_${PN} = "${sysconfdir}/${PN}/httpd.conf \
+ ${sysconfdir}/${PN}/magic \
+ ${sysconfdir}/${PN}/mime.types \
+ ${sysconfdir}/init.d/${PN} "
+
+PACKAGES = "${PN}-doc ${PN}-dev ${PN}-dbg ${PN}"
+
+# we override here rather than append so that .so links are
+# included in the runtime package rather than here (-dev)
+# and to get build, icons, error into the -dev package
+FILES_${PN}-dev = "${datadir}/${PN}/build \
+ ${datadir}/${PN}/icons \
+ ${datadir}/${PN}/error \
+ ${bindir}/apr-config ${bindir}/apu-config \
+ ${libdir}/apr*.exp \
+ ${includedir}/${PN} \
+ ${libdir}/*.la \
+ ${libdir}/*.a"
+
+# manual to manual
+FILES_${PN}-doc += " ${datadir}/${PN}/manual"
+
+#
+# override this too - here is the default, less datadir
+#
+FILES_${PN} = "${bindir} ${sbindir} ${libexecdir} ${libdir}/lib*.so.* ${sysconfdir} \
+ ${sharedstatedir} ${localstatedir} /bin /sbin /lib/*.so* \
+ ${libdir}/${PN}"
+
+# we want htdocs and cgi-bin to go with the binary
+FILES_${PN} += "${datadir}/${PN}/htdocs ${datadir}/${PN}/cgi-bin"
+
+#make sure the lone .so links also get wrapped in the base package
+FILES_${PN} += "${libdir}/lib*.so ${libdir}/pkgconfig/*"
+
+FILES_${PN}-dbg += "${libdir}/${PN}/modules/.debug"
+
--- /dev/null
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides: httpd
+# Required-Start: $local_fs $remote_fs $network $named
+# Required-Stop: $local_fs $remote_fs $network
+# Should-Start: distcache
+# Short-Description: start and stop Apache HTTP Server
+# Description: The Apache HTTP Server is an extensible server
+# implementing the current HTTP standards.
+### END INIT INFO
+
+ARGS="-D SSL -k start"
+NAME=apache2
+PATH=/bin:/usr/bin:/sbin:/usr/sbin
+DAEMON=/usr/sbin/httpd
+SUEXEC=/usr/lib/apache/suexec
+PIDFILE=/var/run/$NAME.pid
+CONF=/etc/apache2/httpd.conf
+APACHECTL=/usr/sbin/apachectl
+
+trap "" 1
+export LANG=C
+export PATH
+
+test -f $DAEMON || exit 0
+test -f $APACHECTL || exit 0
+
+# ensure we don't leak environment vars into apachectl
+APACHECTL="env -i LANG=${LANG} PATH=${PATH} $APACHECTL"
+
+case "$1" in
+ start)
+ echo -n "Starting web server: $NAME"
+ $APACHECTL $ARGS
+ ;;
+
+ stop)
+ $APACHECTL stop
+ ;;
+
+ reload)
+ echo -n "Reloading $NAME configuration"
+ $APACHECTL reload
+ ;;
+
+ reload-modules)
+ echo -n "Reloading $NAME modules"
+ $APACHECTL restart
+ ;;
+
+ restart)
+ $APACHECTL restart
+ exit $?
+ ;;
+
+ force-reload)
+ $0 reload-modules
+ exit $?
+ ;;
+
+ *)
+ echo "Usage: /etc/init.d/$NAME {start|stop|reload|reload-modules|force-reload|restart}"
+ exit 1
+ ;;
+esac
+
+if [ $? = 0 ]; then
+ echo .
+ exit 0
+else
+ echo failed
+ exit 1
+fi
projects / scm / bb / tizen-distro.git / commitdiff