board: ti: j721s2: Add board_init and support for selecting DT based on EEPROM

Add the board_init_f API for SPL and run the platform-required SoC
initialization.

Add the functionality for board name-based DTB selection from FIT
within SPL. This will make it easier to utilise one defconfig for
both the EVM and the SK.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c
index 9b159e3..c86715f 100644 (file)
--- a/board/ti/j721s2/evm.c
+++ b/board/ti/j721s2/evm.c
@@ -23,6 +23,7 @@
 #include <asm/arch/sys_proto.h>
 #include <dm.h>
 #include <dm/uclass-internal.h>
+#include <dm/root.h>
 
 #include "../common/board_detect.h"
 
@@ -207,3 +208,66 @@ int board_late_init(void)
 void spl_board_init(void)
 {
 }
+
+/* Support for the various EVM / SK families */
+#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT)
+void do_dt_magic(void)
+{
+       int ret, rescan, mmc_dev = -1;
+       static struct mmc *mmc;
+
+       do_board_detect();
+
+       /*
+        * Board detection has been done.
+        * Let us see if another dtb wouldn't be a better match
+        * for our board
+        */
+       if (IS_ENABLED(CONFIG_CPU_V7R)) {
+               ret = fdtdec_resetup(&rescan);
+               if (!ret && rescan) {
+                       dm_uninit();
+                       dm_init_and_scan(true);
+               }
+       }
+
+       /*
+        * Because of multi DTB configuration, the MMC device has
+        * to be re-initialized after reconfiguring FDT inorder to
+        * boot from MMC. Do this when boot mode is MMC and ROM has
+        * not loaded SYSFW.
+        */
+       switch (spl_boot_device()) {
+       case BOOT_DEVICE_MMC1:
+               mmc_dev = 0;
+               break;
+       case BOOT_DEVICE_MMC2:
+       case BOOT_DEVICE_MMC2_2:
+               mmc_dev = 1;
+               break;
+       }
+
+       if (mmc_dev > 0 && !check_rom_loaded_sysfw()) {
+               ret = mmc_init_device(mmc_dev);
+               if (!ret) {
+                       mmc = find_mmc_device(mmc_dev);
+                       if (mmc) {
+                               ret = mmc_init(mmc);
+                               if (ret)
+                                       printf("mmc init failed with error: %d\n", ret);
+                       }
+               }
+       }
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+       k3_spl_init();
+#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT)
+       do_dt_magic();
+#endif
+       k3_mem_init();
+}
+#endif