libcurl
glib-2.0
json-glib-1.0
+ capi-system-info
)
ADD_DEFINITIONS(-DCBOR_FILE_IN_RES="${INSTALL_RESDIR}/${CBOR_FILE}")
${PROJECT_ROOT_DIR}/src/resource/resource_sound_detection_sensor.c
${PROJECT_ROOT_DIR}/src/resource/resource_tilt_sensor.c
${PROJECT_ROOT_DIR}/src/resource/resource_gas_detection_sensor.c
+ ${PROJECT_ROOT_DIR}/src/resource/resource_sound_level_sensor.c
+ ${PROJECT_ROOT_DIR}/src/resource/resource_adc_mcp3008.c
)
TARGET_LINK_LIBRARIES(${PROJECT_NAME} ${pkgs_LDFLAGS} -lm)
CONFIGURE_FILE(${PROJECT_ROOT_DIR}/tizen-manifest.xml.in ${ORG_PREFIX}.${PROJECT_NAME}.xml @ONLY)
# Install
INSTALL(TARGETS ${PROJECT_NAME} DESTINATION ${INSTALL_EXEC_PREFIX})
-INSTALL(DIRECTORY DESTINATION ${INSTALL_OWNER_DATADIR})
INSTALL(FILES ${ORG_PREFIX}.${PROJECT_NAME}.xml DESTINATION ${SYS_PACKAGES_DIR})
INSTALL(FILES ${PROJECT_ROOT_DIR}/shared/res/default_icon.png DESTINATION ${SYS_ICONS_DIR} RENAME ${PROJECT_NAME}.png)
INSTALL(FILES ${PROJECT_ROOT_DIR}/res/${CBOR_FILE} DESTINATION ${INSTALL_RESDIR})
#include "resource/resource_sound_detection_sensor.h"
#include "resource/resource_tilt_sensor.h"
#include "resource/resource_gas_detection_sensor.h"
+#include "resource/resource_sound_level_sensor.h"
#endif /* __POSITION_FINDER_RESOURCE_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *
+ * Contact: Jin Yoon <jinny.yoon@samsung.com>
+ * Geunsun Lee <gs86.lee@samsung.com>
+ * Eunyoung Lee <ey928.lee@samsung.com>
+ * Junkyu Han <junkyu.han@samsung.com>
+ *
+ * Licensed under the Flora License, Version 1.1 (the License);
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://floralicense.org/license/
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __POSITION_FINDER_RESOURCE_ADC_MCP3008_H__
+#define __POSITION_FINDER_RESOURCE_ADC_MCP3008_H__
+
+int resource_adc_mcp3008_init(void);
+int resource_read_adc_mcp3008(int ch_num, unsigned int *out_value);
+void resource_adc_mcp3008_fini(void);
+
+#endif /* __POSITION_FINDER_RESOURCE_ADC_MCP3008_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *
+ * Contact: Jin Yoon <jinny.yoon@samsung.com>
+ * Geunsun Lee <gs86.lee@samsung.com>
+ * Eunyoung Lee <ey928.lee@samsung.com>
+ * Junkyu Han <junkyu.han@samsung.com>
+ *
+ * Licensed under the Flora License, Version 1.1 (the License);
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://floralicense.org/license/
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __POSITION_FINDER_RESOURCE_SOUND_LEVEL_SENSOR_H__
+#define __POSITION_FINDER_RESOURCE_SOUND_LEVEL_SENSOR_H__
+
+ /**
+ * @brief Reads the value from sound level sensor through AD converter(MCP3008).
+ * @remarks We assume that only one AD converter is connected with device.
+ * @param[in] ch_num The number of channel connected to the sound level sensor with AD converter
+ * @param[out] out_value The value of a sound level
+ * @return 0 on success, otherwise a negative error value
+ *
+ */
+extern int resource_read_sound_level_sensor(int ch_num, unsigned int *out_value);
+
+#endif /* __POSITION_FINDER_RESOURCE_SOUND_LEVEL_SENSOR_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *
+ * Contact: Jin Yoon <jinny.yoon@samsung.com>
+ * Geunsun Lee <gs86.lee@samsung.com>
+ * Eunyoung Lee <ey928.lee@samsung.com>
+ * Junkyu Han <junkyu.han@samsung.com>
+ *
+ * Licensed under the Flora License, Version 1.1 (the License);
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://floralicense.org/license/
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __POSITION_FINDER_RESOURCE_SOUND_LEVEL_SENSOR_INTERNAL_H__
+#define __POSITION_FINDER_RESOURCE_SOUND_LEVEL_SENSOR_INTERNAL_H__
+
+extern void resource_close_sound_level_sensor(void);
+
+#endif /* __POSITION_FINDER_RESOURCE_SOUND_LEVEL_SENSOR_INTERNAL_H__ */
#include "resource/resource_sound_detection_sensor_internal.h"
#include "resource/resource_tilt_sensor_internal.h"
#include "resource/resource_gas_detection_sensor_internal.h"
+#include "resource/resource_sound_level_sensor_internal.h"
#define PIN_MAX 40
BuildRequires: pkgconfig(libcurl)
BuildRequires: pkgconfig(glib-2.0)
BuildRequires: pkgconfig(json-glib-1.0)
+BuildRequires: pkgconfig(capi-system-info)
%description
Server for Position Finder
chsmack -a "User::Pkg::%{alias}" %{_pkg_res_dir}/*.dat
chmod 444 %{_pkg_res_dir}/*.dat
-touch %{_pkg_rw_data_dir}/%{_cbor_file}
-chsmack -a "User::Pkg::%{alias}" %{_pkg_rw_data_dir}/*.dat
-chmod 666 %{_pkg_rw_data_dir}/*.dat
-
-# This routine will be used in the file of .dev_id.
-#touch %{_pkg_rw_data_dir}/%{_conf_file}
-#echo "/door/777" > %{_pkg_rw_data_dir}/%{_conf_file}
-#chsmack -a "User::Pkg::%{alias}" %{_pkg_rw_data_dir}/%{_conf_file}
-#chmod 444 %{_pkg_rw_data_dir}/%{_conf_file}
-
%postun -p /sbin/ldconfig
%files
%{_pkg_res_dir}/*.conf
%manifest %{alias}.manifest
%defattr(-,root,root,-)
-%{_pkg_rw_data_dir}
%{_pkg_dir}/bin/%{P_NAME}
%{_sys_packages_dir}/%{alias}.xml
%{_sys_icons_dir}/*.png
resource_info[i].close(i);
}
resource_close_illuminance_sensor();
+ resource_close_sound_level_sensor();
}
--- /dev/null
+/*
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *
+ * Contact: Jin Yoon <jinny.yoon@samsung.com>
+ * Geunsun Lee <gs86.lee@samsung.com>
+ * Eunyoung Lee <ey928.lee@samsung.com>
+ * Junkyu Han <junkyu.han@samsung.com>
+ *
+ * Licensed under the Flora License, Version 1.1 (the License);
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://floralicense.org/license/
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <peripheral_io.h>
+#include <tizen.h>
+#include <system_info.h>
+#include <string.h>
+#include "log.h"
+
+
+#define MCP3008_SPEED 3600000
+#define MCP3008_BPW 8
+
+#define MCP3008_TX_WORD1 0x01 /* 0b00000001 */
+#define MCP3008_TX_CH0 0x80 /* 0b10000000 */
+#define MCP3008_TX_CH1 0x90 /* 0b10010000 */
+#define MCP3008_TX_CH2 0xA0 /* 0b10100000 */
+#define MCP3008_TX_CH3 0xB0 /* 0b10110000 */
+#define MCP3008_TX_CH4 0xC0 /* 0b11000000 */
+#define MCP3008_TX_CH5 0xD0 /* 0b11010000 */
+#define MCP3008_TX_CH6 0xE0 /* 0b11100000 */
+#define MCP3008_TX_CH7 0xF0 /* 0b11110000 */
+#define MCP3008_TX_WORD3 0x00 /* 0b00000000 */
+
+#define MCP3008_RX_WORD1_MASK 0x00 /* 0b00000000 */
+#define MCP3008_RX_WORD2_NULL_BIT_MASK 0x04 /* 0b00000100 */
+#define MCP3008_RX_WORD2_MASK 0x03 /* 0b00000011 */
+#define MCP3008_RX_WORD3_MASK 0xFF /* 0b11111111 */
+#define UINT10_VALIDATION_MASK 0x3FF
+
+#define MODEL_NAME_KEY "http://tizen.org/system/model_name"
+#define MODEL_NAME_RPI3 "rpi3"
+#define MODEL_NAME_ARTIK "artik"
+
+static peripheral_spi_h MCP3008_H = NULL;
+static unsigned int ref_count = 0;
+
+int resource_adc_mcp3008_init(void)
+{
+ int ret = 0;
+ int bus = -1;
+ char *model_name = NULL;
+
+ if (MCP3008_H) {
+ _D("SPI device aleady initialized [ref_count : %u]", ref_count);
+ ref_count++;
+ return 0;
+ }
+
+ system_info_get_platform_string(MODEL_NAME_KEY, &model_name);
+ if (!model_name) {
+ _E("fail to get model name");
+ return -1;
+ }
+
+ if (!strcmp(model_name, MODEL_NAME_RPI3)) {
+ bus = 0;
+ } else if (!strcmp(model_name, MODEL_NAME_ARTIK)) {
+ bus = 2;
+ } else {
+ _E("unknown model name : %s", model_name);
+ free(model_name);
+ return -1;
+ }
+ free(model_name);
+ model_name = NULL;
+
+ ret = peripheral_spi_open(bus, 0, &MCP3008_H);
+ if (PERIPHERAL_ERROR_NONE != ret) {
+ _E("spi open failed :%s ", get_error_message(ret));
+ return -1;
+ }
+
+ ret = peripheral_spi_set_mode(MCP3008_H, PERIPHERAL_SPI_MODE_0);
+ if (PERIPHERAL_ERROR_NONE != ret) {
+ _E("peripheral_spi_set_mode failed :%s ", get_error_message(ret));
+ goto error_after_open;
+ }
+ ret = peripheral_spi_set_bit_order(MCP3008_H, PERIPHERAL_SPI_BIT_ORDER_MSB);
+ if (PERIPHERAL_ERROR_NONE != ret) {
+ _E("peripheral_spi_set_bit_order failed :%s ", get_error_message(ret));
+ goto error_after_open;
+ }
+
+ ret = peripheral_spi_set_bits_per_word(MCP3008_H, MCP3008_BPW);
+ if (PERIPHERAL_ERROR_NONE != ret) {
+ _E("peripheral_spi_set_bits_per_word failed :%s ", get_error_message(ret));
+ goto error_after_open;
+ }
+
+ ret = peripheral_spi_set_frequency(MCP3008_H, MCP3008_SPEED);
+ if (PERIPHERAL_ERROR_NONE != ret) {
+ _E("peripheral_spi_set_frequency failed :%s ", get_error_message(ret));
+ goto error_after_open;
+ }
+
+ ref_count++;
+
+ return 0;
+
+error_after_open:
+ peripheral_spi_close(MCP3008_H);
+ MCP3008_H = NULL;
+ return -1;
+}
+
+
+int resource_read_adc_mcp3008(int ch_num, unsigned int *out_value)
+{
+ unsigned char rx[3] = {0, };
+ unsigned char tx[3] = {0, };
+ unsigned char rx_w1 = 0;
+ unsigned char rx_w2 = 0;
+ unsigned char rx_w2_nb = 0;
+ unsigned char rx_w3 = 0;
+ unsigned short int result = 0;
+
+ retv_if(MCP3008_H == NULL, -1);
+ retv_if(out_value == NULL, -1);
+ retv_if((ch_num < 0 || ch_num > 7), -1);
+
+ tx[0] = MCP3008_TX_WORD1;
+ switch (ch_num) {
+ case 0:
+ tx[1] = MCP3008_TX_CH0;
+ break;
+ case 1:
+ tx[1] = MCP3008_TX_CH1;
+ break;
+ case 2:
+ tx[1] = MCP3008_TX_CH2;
+ break;
+ case 3:
+ tx[1] = MCP3008_TX_CH3;
+ break;
+ case 4:
+ tx[1] = MCP3008_TX_CH4;
+ break;
+ case 5:
+ tx[1] = MCP3008_TX_CH5;
+ break;
+ case 6:
+ tx[1] = MCP3008_TX_CH6;
+ break;
+ case 7:
+ tx[1] = MCP3008_TX_CH7;
+ break;
+ default:
+ tx[1] = MCP3008_TX_CH0;
+ break;
+ }
+ tx[2] = MCP3008_TX_WORD3;
+
+ peripheral_spi_transfer(MCP3008_H, tx, rx, 3);
+
+ rx_w1 = rx[0] & MCP3008_RX_WORD1_MASK;
+ retv_if(rx_w1 != 0, -1);
+
+ rx_w2_nb = rx[1] & MCP3008_RX_WORD2_NULL_BIT_MASK;
+ retv_if(rx_w2_nb != 0, -1);
+
+ rx_w2 = rx[1] & MCP3008_RX_WORD2_MASK;
+ rx_w3 = rx[2] & MCP3008_RX_WORD3_MASK;
+
+ result = ((rx_w2 << 8) | (rx_w3)) & UINT10_VALIDATION_MASK;
+
+ // _D("%hu", result);
+
+ *out_value = result;
+
+ return 0;
+}
+
+void resource_adc_mcp3008_fini(void)
+{
+ if (MCP3008_H)
+ ref_count--;
+ else
+ return;
+
+ if (ref_count == 0) {
+ peripheral_spi_close(MCP3008_H);
+ MCP3008_H = NULL;
+ }
+
+ return;
+}
+
--- /dev/null
+/*
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *
+ * Contact: Jin Yoon <jinny.yoon@samsung.com>
+ * Geunsun Lee <gs86.lee@samsung.com>
+ * Eunyoung Lee <ey928.lee@samsung.com>
+ * Junkyu Han <junkyu.han@samsung.com>
+ *
+ * Licensed under the Flora License, Version 1.1 (the License);
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://floralicense.org/license/
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <peripheral_io.h>
+#include <sys/time.h>
+
+#include "log.h"
+#include "resource/resource_adc_mcp3008.h"
+
+static bool initialized = false;
+
+void resource_close_sound_level_sensor(void)
+{
+ resource_adc_mcp3008_fini();
+ initialized = false;
+}
+
+int resource_read_sound_level_sensor(int ch_num, unsigned int *out_value)
+{
+ unsigned int read_value = 0;
+ int ret = 0;
+
+ if (!initialized) {
+ ret = resource_adc_mcp3008_init();
+ retv_if(ret != 0, -1);
+ initialized = true;
+ }
+ ret = resource_read_adc_mcp3008(ch_num, &read_value);
+ retv_if(ret != 0, -1);
+
+ *out_value = read_value;
+
+ return 0;
+}
+
projects / apps / native / position-finder-server.git / commitdiff