[ARM] pxa/cm-x300: add revision difference handling

Different revisions of CM-X300 use different pins for several functions.
Make the kernel aware of it.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 7f2e878..07d7473 100644 (file)
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -137,7 +137,6 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
        GPIO36_UART1_DTR,
 
        /* GPIOs */
-       GPIO79_GPIO,                    /* LED */
        GPIO82_GPIO | MFP_PULL_HIGH,    /* MMC CD */
        GPIO85_GPIO,                    /* MMC WP */
        GPIO99_GPIO,                    /* Ethernet IRQ */
@@ -153,6 +152,20 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
        GPIO22_I2C_SDA,
 };
 
+static mfp_cfg_t cm_x300_rev_lt130_mfp_cfg[] __initdata = {
+       /* GPIOs */
+       GPIO79_GPIO,                    /* LED */
+       GPIO77_GPIO,                    /* WiFi reset */
+       GPIO78_GPIO,                    /* BT reset */
+};
+
+static mfp_cfg_t cm_x300_rev_ge130_mfp_cfg[] __initdata = {
+       /* GPIOs */
+       GPIO76_GPIO,                    /* LED */
+       GPIO71_GPIO,                    /* WiFi reset */
+       GPIO70_GPIO,                    /* BT reset */
+};
+
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource dm9000_resources[] = {
        [0] = {
@@ -351,7 +364,6 @@ static struct gpio_led cm_x300_leds[] = {
        [0] = {
                .name = "cm-x300:green",
                .default_trigger = "heartbeat",
-               .gpio = 79,
                .active_low = 1,
        },
 };
@@ -371,6 +383,11 @@ static struct platform_device cm_x300_led_device = {
 
 static void __init cm_x300_init_leds(void)
 {
+       if (system_rev < 130)
+               cm_x300_leds[0].gpio = 79;
+       else
+               cm_x300_leds[0].gpio = 76;
+
        platform_device_register(&cm_x300_led_device);
 }
 #else
@@ -433,11 +450,21 @@ static void __init cm_x300_init_rtc(void)
 static inline void cm_x300_init_rtc(void) {}
 #endif
 
-static void __init cm_x300_init(void)
+static void __init cm_x300_init_mfp(void)
 {
        /* board-processor specific GPIO initialization */
        pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
 
+       if (system_rev < 130)
+               pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_rev_lt130_mfp_cfg));
+       else
+               pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_rev_ge130_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+       cm_x300_init_mfp();
+
        pxa_set_ffuart_info(NULL);
        pxa_set_btuart_info(NULL);
        pxa_set_stuart_info(NULL);