Updated traditional Chinese translation

diff --git a/po/ChangeLog b/po/ChangeLog
index 97d4de8..18e0366 100644 (file)
--- a/po/ChangeLog
+++ b/po/ChangeLog
@@ -1,3 +1,8 @@
+2002-03-31  Abel Cheung  <maddog@linux.org.hk>
+
+       * zh_TW.po: Updated traditional Chinese translation, and removed
+         all positional parameters :(
+
 2002-03-28  Valek Filippov <frob@df.ru>
 
        * ru.po: Updated russian translation.

diff --git a/po/zh_TW.po b/po/zh_TW.po
index df317c3..171d3c2 100644 (file)
--- a/po/zh_TW.po
+++ b/po/zh_TW.po
@@ -1,12 +1,12 @@
-# Traditional chinese translation for glib20.
+# Traditional chinese translation for glib 2.
 # Copyright (C) 2001-2002 Free Software Foundation, Inc.
 # Abel Cheung <maddog@linux.org.hk>, 2001-2002.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: glib 1.3.13\n"
-"POT-Creation-Date: 2002-03-28 18:32-0500\n"
-"PO-Revision-Date: 2002-02-07 08:25+0800\n"
+"Project-Id-Version: glib 2.0.1\n"
+"POT-Creation-Date: 2002-03-29 19:07-0500\n"
+"PO-Revision-Date: 2002-03-31 05:02+0800\n"
 "Last-Translator: Abel Cheung <maddog@linux.org.hk>\n"
 "Language-Team: Traditional Chinese <zh-l10n@linux.org.tw>\n"
 "MIME-Version: 1.0\n"
@@ -16,18 +16,18 @@ msgstr ""
 #: glib/gconvert.c:398
 #, c-format
 msgid "Conversion from character set '%s' to '%s' is not supported"
-msgstr "不支援將字元集 '%s' 轉換到 '%s'"
+msgstr "不支援將字元集‘%s’轉換成‘%s’"
 
 #: glib/gconvert.c:402
 #, c-format
 msgid "Could not open converter from '%s' to '%s': %s"
-msgstr "無法開啟由 '%s' 至 '%s' 的轉換器：%s"
+msgstr "無法開啟將‘%s’轉換至‘%s’的程序：%s"
 
 #: glib/gconvert.c:600 glib/gconvert.c:890 glib/giochannel.c:1282
 #: glib/giochannel.c:1324 glib/giochannel.c:2163 glib/gutf8.c:875
 #: glib/gutf8.c:1320
 msgid "Invalid byte sequence in conversion input"
-msgstr "轉換輸入時遇到不正確的位元組次序"
+msgstr "轉換輸入資料時遇到不正確的位元組次序"
 
 #: glib/gconvert.c:605 glib/gconvert.c:821 glib/giochannel.c:1289
 #: glib/giochannel.c:2175
@@ -38,123 +38,122 @@ msgstr "轉換時發生錯誤：%s"
 #: glib/gconvert.c:623 glib/gutf8.c:871 glib/gutf8.c:1071 glib/gutf8.c:1212
 #: glib/gutf8.c:1316
 msgid "Partial character sequence at end of input"
-msgstr "輸入完結時出現未完成的字元次序"
+msgstr "輸入資料結束時出現未完成的字元次序"
 
 #: glib/gconvert.c:796
 #, c-format
 msgid "Cannot convert fallback '%s' to codeset '%s'"
-msgstr "無法將後備字串 '%s' 轉換到字元集 '%s'"
+msgstr "無法將後備字串‘%s’的字元集轉換成‘%s’"
 
 #: glib/gconvert.c:1630
 #, c-format
 msgid "The URI '%s' is not an absolute URI using the file scheme"
-msgstr "URI '%s' 不是使用 file 格式的絕對 URI"
+msgstr "URI‘%s’不是使用 file 格式的絕對 URI"
 
 #: glib/gconvert.c:1640
 #, c-format
 msgid "The local file URI '%s' may not include a '#'"
-msgstr "本機檔案 URI '%s' 不應含有 '#'"
+msgstr "本機檔案 URI‘%s’不應含有‘#’"
 
 #: glib/gconvert.c:1657
 #, c-format
 msgid "The URI '%s' is invalid"
-msgstr "不正確的 URI '%s'"
+msgstr "URI‘%s’是無效的"
 
 #: glib/gconvert.c:1669
-#, fuzzy, c-format
+#, c-format
 msgid "The hostname of the URI '%s' is invalid"
-msgstr "URI '%s' 中的主機名稱含有不正確的跳出字元"
+msgstr "URI‘%s’中的主機名稱是無效的"
 
 #: glib/gconvert.c:1685
 #, c-format
 msgid "The URI '%s' contains invalidly escaped characters"
-msgstr "URI '%s' 含有不正確的跳出字元"
+msgstr "URI‘%s’含有不正確的跳出字元"
 
 #: glib/gconvert.c:1756
 #, c-format
 msgid "The pathname '%s' is not an absolute path"
-msgstr "路徑名稱 '%s' 不是絕對路徑"
+msgstr "路徑名稱‘%s’不是絕對路徑"
 
 #: glib/gconvert.c:1766
-#, fuzzy
 msgid "Invalid hostname"
-msgstr "主機名稱含有不正確的位元組次序"
+msgstr "無效的主機名稱"
 
 #: glib/gdir.c:79
 #, c-format
 msgid "Error opening directory '%s': %s"
-msgstr "開啟目錄 '%s' 時發生錯誤：%s"
+msgstr "開啟目錄‘%s’時發生錯誤：%s"
 
 #: glib/gfileutils.c:337 glib/gfileutils.c:402
 #, c-format
 msgid "Could not allocate %lu bytes to read file \"%s\""
-msgstr "ç\84¡æ³\95å\88\86é\85\8d %lu ä½\8då\85\83ä¾\86è®\80å\85¥檔案“%s”"
+msgstr "ç\84¡æ³\95å\88\86é\85\8d %lu ä½\8då\85\83ä¾\86è®\80å\8f\96檔案“%s”"
 
 #: glib/gfileutils.c:348
 #, c-format
 msgid "Error reading file '%s': %s"
-msgstr "è®\80å\85¥æª\94æ¡\88 '%s' 時發生錯誤：%s"
+msgstr "è®\80å\8f\96æª\94æ¡\88â\80\98%sâ\80\99時發生錯誤：%s"
 
 #: glib/gfileutils.c:426
 #, c-format
 msgid "Failed to read from file '%s': %s"
-msgstr "è®\80å\85¥æª\94æ¡\88失æ\95\97 '%s'：%s"
+msgstr "è®\80å\8f\96æª\94æ¡\88失æ\95\97â\80\98%sâ\80\99：%s"
 
 #: glib/gfileutils.c:473 glib/gfileutils.c:541
 #, c-format
 msgid "Failed to open file '%s': %s"
-msgstr "開啟檔案失敗 '%s'：%s"
+msgstr "開啟檔案失敗‘%s’：%s"
 
 #: glib/gfileutils.c:487
 #, c-format
 msgid "Failed to get attributes of file '%s': fstat() failed: %s"
-msgstr "無法取得檔案 '%s' 的屬性：fstat() 失敗：%s"
+msgstr "無法取得檔案‘%s’的屬性：fstat() 失敗：%s"
 
 #: glib/gfileutils.c:513
 #, c-format
 msgid "Failed to open file '%s': fdopen() failed: %s"
-msgstr "開啟檔案 '%s' 失敗：fdopen() 失敗：%s"
+msgstr "開啟檔案‘%s’失敗：fdopen() 失敗：%s"
 
 #: glib/gfileutils.c:720
 #, c-format
 msgid "Template '%s' invalid, should not contain a '%s'"
-msgstr "樣式 '%s' 不正確，不應含有 '%s'"
+msgstr "樣式‘%s’不正確，不應含有‘%s’"
 
 #: glib/gfileutils.c:732
 #, c-format
 msgid "Template '%s' doesn't end with XXXXXX"
-msgstr "樣式 '%s' 結尾不是 XXXXXX"
+msgstr "樣式‘%s’結尾不是 XXXXXX"
 
 #: glib/gfileutils.c:753
 #, c-format
 msgid "Failed to create file '%s': %s"
-msgstr "無法建立檔案 '%s'：%s"
+msgstr "無法建立檔案‘%s’：%s"
 
 #: glib/giochannel.c:1110
 #, c-format
 msgid "Conversion from character set `%s' to `%s' is not supported"
-msgstr "不支援將字元集 `%s' 轉換到 `%s'"
+msgstr "不支援將字元集‘%s’轉換成‘%s’"
 
 #: glib/giochannel.c:1114
 #, c-format
 msgid "Could not open converter from `%s' to `%s': %s"
-msgstr "無法開啟由 `%s' 至 `%s' 的轉換器：%s"
+msgstr "無法開啟將‘%s’轉換至‘%s’的程序：%s"
 
 #: glib/giochannel.c:1460
 msgid "Can't do a raw read in g_io_channel_read_line_string"
-msgstr "g_io_channel_read_line_string 中ç\84¡æ³\95è®\80å\85¥原始資料"
+msgstr "g_io_channel_read_line_string 中ç\84¡æ³\95è®\80å\8f\96原始資料"
 
 #: glib/giochannel.c:1507 glib/giochannel.c:1761 glib/giochannel.c:1847
 msgid "Leftover unconverted data in read buffer"
-msgstr "ç\94¨ä¾\86è®\80å\85¥資料的緩衝區中仍有未轉換的資料"
+msgstr "ç\94¨ä¾\86è®\80å\8f\96資料的緩衝區中仍有未轉換的資料"
 
 #: glib/giochannel.c:1587 glib/giochannel.c:1661
 msgid "Channel terminates in a partial character"
-msgstr "輸å\85¥ç®¡é\81\93å\9c¨å­\97å\85\83æ\9cªå®\8cæ\88\90å\89\8då°±çµ\82æ­¢"
+msgstr "輸å\85¥ç®¡é\81\93å\9c¨å­\97å\85\83æ\9cªå®\8cæ\88\90å\89\8då·²ç¶\93çµ\90æ\9d\9f"
 
 #: glib/giochannel.c:1647
 msgid "Can't do a raw read in g_io_channel_read_to_end"
-msgstr "g_io_channel_read_to_end 中ç\84¡æ³\95è®\80å\85¥原始資料"
+msgstr "g_io_channel_read_to_end 中ç\84¡æ³\95è®\80å\8f\96原始資料"
 
 #: glib/giowin32.c:712 glib/giowin32.c:741
 msgid "Incorrect message size"
@@ -181,7 +180,7 @@ msgstr "在第 %d 行發生錯誤：%s"
 #: glib/gmarkup.c:382
 msgid ""
 "Empty entity '&;' seen; valid entities are: &amp; &quot; &lt; &gt; &apos;"
-msgstr "出現空白的實體 '&;'；可用的實體為：&amp; &quot; &lt; &gt; &apos;"
+msgstr "出現空白的實體‘&;’；可用的實體為：&amp; &quot; &lt; &gt; &apos;"
 
 #: glib/gmarkup.c:392
 #, c-format
@@ -190,18 +189,18 @@ msgid ""
 "begins an entity; if this ampersand isn't supposed to be an entity, escape "
 "it as &amp;"
 msgstr ""
-"實體名稱不應以 '%s' 開始，應該使用 & 字元；如果這個 & 字元不是作為實體使用，"
-"請將 & 轉換為 &amp;"
+"實體名稱不應以‘%s’開始，應該使用 & 字元；如果這個 & 字元不是作為實體使用，請"
+"將 & 轉換為 &amp;"
 
 #: glib/gmarkup.c:428
 #, c-format
 msgid "Character '%s' is not valid inside an entity name"
-msgstr "實體名稱中不應含有字元 '%s'"
+msgstr "實體名稱中不應含有字元‘%s’"
 
 #: glib/gmarkup.c:472
 #, c-format
 msgid "Entity name '%s' is not known"
-msgstr "不詳的實體名稱 '%s'"
+msgstr "不詳的實體名稱‘%s’"
 
 #: glib/gmarkup.c:482
 msgid ""
@@ -216,12 +215,12 @@ msgstr ""
 msgid ""
 "Failed to parse '%s', which should have been a digit inside a character "
 "reference (&#234; for example) - perhaps the digit is too large"
-msgstr "解析 '%s' 失敗，字元參引內應該含有數字（例如 &#234;）─ 可能是數字過大"
+msgstr "分析‘%s’失敗，字元參引內應該含有數字（例如 &#234;）─ 可能是數字太大"
 
 #: glib/gmarkup.c:553
 #, c-format
 msgid "Character reference '%s' does not encode a permitted character"
-msgstr "字元參引 '%s' 含有不正當的字元"
+msgstr "字元參引‘%s’含有不正當的字元"
 
 #: glib/gmarkup.c:570
 msgid "Empty character reference; should include a digit such as &#454;"
@@ -242,27 +241,27 @@ msgstr "不正確的 UTF-8 編碼文字"
 
 #: glib/gmarkup.c:932
 msgid "Document must begin with an element (e.g. <book>)"
-msgstr "文件開始必須為一元素（例如 <book>）"
+msgstr "文件開始必須為一元素 (例如 <book>)"
 
 #: glib/gmarkup.c:970
 #, c-format
 msgid ""
 "'%s' is not a valid character following a '<' character; it may not begin an "
 "element name"
-msgstr "'<' 字元後的 '%s' 不是正確的字元；這樣不可能是元素名稱的開始部份"
+msgstr "‘<’字元後的‘%s’不是有效的字元；這樣不可能是元素名稱的開始部份"
 
 #: glib/gmarkup.c:1033
 #, c-format
 msgid ""
 "Odd character '%s', expected a '>' character to end the start tag of element "
 "'%s'"
-msgstr "不尋常的字元 '%s'，元素 '%s' 的開始標籤應該以 '>' 字元終結"
+msgstr "不尋常的字元‘%s’，元素‘%s’的開始標籤應該以‘>’字元結束"
 
 #: glib/gmarkup.c:1120
 #, c-format
 msgid ""
 "Odd character '%s', expected a '=' after attribute name '%s' of element '%s'"
-msgstr "不尋常的字元 '%1$s'，元素 '%3$s' 的屬性名稱 '%2$s' 後應該是 '=' 字元"
+msgstr "不尋常的字元‘%s’，屬性名稱‘%s’(屬於元素‘%s’) 後應該是‘=’字元"
 
 #: glib/gmarkup.c:1161
 #, c-format
@@ -271,8 +270,8 @@ msgid ""
 "element '%s', or optionally an attribute; perhaps you used an invalid "
 "character in an attribute name"
 msgstr ""
-"不尋常的字元 '%s'，元素 '%s' 的開始標籤應該以 '>' 或 '/' 字元終結，也可以是屬"
-"性；或許你在屬性名稱中使用了不正確的字元"
+"不尋常的字元‘%s’，元素‘%s’的開始標籤應該以‘>’或‘/’字元終結，也可以是屬性；或"
+"許你在屬性名稱中使用了無效的字元"
 
 #: glib/gmarkup.c:1244
 #, c-format
@@ -280,33 +279,31 @@ msgid ""
 "Odd character '%s', expected an open quote mark after the equals sign when "
 "giving value for attribute '%s' of element '%s'"
 msgstr ""
-"不尋常的字元 '%1$s'，當指定元素 '%3$s' 的屬性 '%2$s' 的值時，等號後應該出現開"
-"引號"
+"不尋常的字元‘%s’，當指定屬性‘%s’的值 (屬於元素‘%s’) 時，等號後應該出現開引號"
 
 #: glib/gmarkup.c:1384
 #, c-format
 msgid ""
 "'%s' is not a valid character following the characters '</'; '%s' may not "
 "begin an element name"
-msgstr "'</' 字元後的 '%s' 不是正確的字元；'%s' 不可能是元素名稱的開始部份"
+msgstr "‘</’字元後的‘%s’不是有效的字元；‘%s’不可能是元素名稱的開始部份"
 
 #: glib/gmarkup.c:1422
 #, c-format
 msgid ""
 "'%s' is not a valid character following the close element name '%s'; the "
 "allowed character is '>'"
-msgstr ""
-"名稱為 '%2$s' 的關閉元素後面，尾隨的 '%1$s' 字元是不正確的；允許的字元為 '>'"
+msgstr "字元‘%s’是無效的 (位置在關閉元素‘%s’末端)；允許的字元為‘>’"
 
 #: glib/gmarkup.c:1433
 #, c-format
 msgid "Element '%s' was closed, no element is currently open"
-msgstr "元素 '%s' 已關閉，沒有開啟中的元素"
+msgstr "元素‘%s’已關閉，沒有開啟中的元素"
 
 #: glib/gmarkup.c:1442
 #, c-format
 msgid "Element '%s' was closed, but the currently open element is '%s'"
-msgstr "元素 '%s' 已關閉，但開啟中的元素是 '%s'"
+msgstr "元素‘%s’已關閉，但開啟中的元素是‘%s’"
 
 #: glib/gmarkup.c:1574
 msgid "Document was empty or contained only whitespace"
@@ -314,14 +311,14 @@ msgstr "文件完全空白或只含有空白字元"
 
 #: glib/gmarkup.c:1588
 msgid "Document ended unexpectedly just after an open angle bracket '<'"
-msgstr "文件在尖角括號 '<' 後突然終止"
+msgstr "文件在尖角括號‘<’後突然終止"
 
 #: glib/gmarkup.c:1596 glib/gmarkup.c:1640
 #, c-format
 msgid ""
 "Document ended unexpectedly with elements still open - '%s' was the last "
 "element opened"
-msgstr "文件在仍然有開啟中的元素時突然終止 - '%s' 是最後一個開啟的元素"
+msgstr "文件在仍然有開啟中的元素時突然終止 ─‘%s’是最後一個開啟的元素"
 
 #: glib/gmarkup.c:1604
 #, c-format
@@ -355,7 +352,7 @@ msgstr "文件在屬性值內突然終止"
 #: glib/gmarkup.c:1648
 #, c-format
 msgid "Document ended unexpectedly inside the close tag for element '%s'"
-msgstr "文件在元素 '%s' 的關閉標籤內突然終止"
+msgstr "文件在元素‘%s’的關閉標籤內突然終止"
 
 #: glib/gmarkup.c:1654
 msgid "Document ended unexpectedly inside a comment or processing instruction"
@@ -370,83 +367,83 @@ msgid "Unmatched quotation mark in command line or other shell-quoted text"
 msgstr "指令列或其它標為指令的字串內有不對稱的引號"
 
 #: glib/gshell.c:529
-#, fuzzy, c-format
+#, c-format
 msgid "Text ended just after a '\\' character. (The text was '%s')"
-msgstr "文字在 '' 字元後就終止了。（文字為 '%s'）"
+msgstr "文字在‘\\’字元後就終止了。(文字為‘%s’)"
 
 #: glib/gshell.c:536
 #, c-format
 msgid "Text ended before matching quote was found for %c. (The text was '%s')"
-msgstr "字串完結前仍沒有對應於 %c 的引號（字串為 '%s'）"
+msgstr "字串完結前仍沒有對應於 %c 的引號 (字串為‘%s’)"
 
 #: glib/gshell.c:548
 msgid "Text was empty (or contained only whitespace)"
-msgstr "文字是空白的（或只含有空白字元）"
+msgstr "文字是空白的 (或只含有空白字元)"
 
 #: glib/gspawn-win32.c:214
 msgid "Failed to read data from child process"
-msgstr "ç\84¡æ³\95ç\94±å\89¯ç¨\8båº\8fè®\80å\85¥資料"
+msgstr "ç\84¡æ³\95ç\94±å\89¯ç¨\8båº\8fè®\80å\8f\96資料"
 
 #: glib/gspawn-win32.c:365
 msgid ""
 "Unexpected error in g_io_channel_win32_poll() reading data from a child "
 "process"
-msgstr "ç\95¶ g_io_channel_win32_poll() ç\94±å\89¯ç¨\8båº\8fè®\80å\85¥è³\87æ\96\99æ\99\82ç\99¼ç\94\9fé\9d\9eé \90æ\9c\9f的錯誤"
+msgstr "ç\95¶ g_io_channel_win32_poll() ç\94±å\89¯ç¨\8båº\8fè®\80å\8f\96è³\87æ\96\99æ\99\82ç\99¼ç\94\9fé \90æ\9c\9få¤\96的錯誤"
 
 #: glib/gspawn-win32.c:843 glib/gspawn.c:914
 #, c-format
 msgid "Failed to read from child pipe (%s)"
-msgstr "ç\84¡æ³\95ç\94±å\89¯ç®¡é\81\93è®\80å\85¥è³\87æ\96\99ï¼\88%sï¼\89"
+msgstr "ç\84¡æ³\95ç\94±å\89¯ç®¡é\81\93è®\80å\8f\96è³\87æ\96\99 (%s)"
 
 #: glib/gspawn-win32.c:931 glib/gspawn.c:1119
 #, c-format
 msgid "Failed to change to directory '%s' (%s)"
-msgstr "無法進入目錄 '%s'（%s）"
+msgstr "無法進入目錄‘%s’(%s)"
 
 #: glib/gspawn-win32.c:940
 #, c-format
 msgid "Failed to execute child process (%s)"
-msgstr "無法執行副程序（%s）"
+msgstr "無法執行副程序 (%s)"
 
 #: glib/gspawn-win32.c:981 glib/gspawn.c:1228
 #, c-format
 msgid "Failed to create pipe for communicating with child process (%s)"
-msgstr "無法建立管道來和副程序溝通（%s）"
+msgstr "無法建立管道來和副程序溝通 (%s)"
 
 #: glib/gspawn.c:161
 #, c-format
 msgid "Failed to read data from child process (%s)"
-msgstr "ç\84¡æ³\95ç\94±å\89¯ç¨\8båº\8fè®\80å\85¥è³\87æ\96\99ï¼\88%sï¼\89"
+msgstr "ç\84¡æ³\95ç\94±å\89¯ç¨\8båº\8fè®\80å\8f\96è³\87æ\96\99 (%s)"
 
 #: glib/gspawn.c:293
 #, c-format
 msgid "Unexpected error in select() reading data from a child process (%s)"
-msgstr "ç\95¶ select() ç\94±å\89¯ç¨\8båº\8fè®\80å\85¥è³\87æ\96\99æ\99\82ç\99¼ç\94\9fæ\9cªé \90æ\9c\9fç\9a\84é\8c¯èª¤ï¼\88%sï¼\89"
+msgstr "ç\95¶ select() ç\94±å\89¯ç¨\8båº\8fè®\80å\8f\96è³\87æ\96\99æ\99\82ç\99¼ç\94\9fé \90æ\9c\9få¤\96ç\9a\84é\8c¯èª¤ (%s)"
 
 #: glib/gspawn.c:376
 #, c-format
 msgid "Unexpected error in waitpid() (%s)"
-msgstr "waitpid() 時發生未預期的錯誤（%s）"
+msgstr "waitpid() 時發生預期外的錯誤 (%s)"
 
 #: glib/gspawn.c:979
 #, c-format
 msgid "Failed to fork (%s)"
-msgstr "無法衍生（%s）"
+msgstr "無法衍生程序 (%s)"
 
 #: glib/gspawn.c:1129
 #, c-format
 msgid "Failed to execute child process \"%s\" (%s)"
-msgstr "無法執行副程序“%s”（%s）"
+msgstr "無法執行副程序“%s”(%s)"
 
 #: glib/gspawn.c:1139
 #, c-format
 msgid "Failed to redirect output or input of child process (%s)"
-msgstr "無法重新導向副程序的輸出或輸入（%s）"
+msgstr "無法重新導向副程序的輸出或輸入 (%s)"
 
 #: glib/gspawn.c:1148
 #, c-format
 msgid "Failed to fork child process (%s)"
-msgstr "無法衍生副程序（%s）"
+msgstr "無法衍生副程序 (%s)"
 
 #: glib/gspawn.c:1156
 #, c-format
@@ -456,7 +453,7 @@ msgstr "執行副程序“%s”時發生不明的錯誤"
 #: glib/gspawn.c:1178
 #, c-format
 msgid "Failed to read enough data from child pid pipe (%s)"
-msgstr "ç\84¡æ³\95ç\94±å\89¯ç¨\8båº\8f pid 管é\81\93è®\80å\85¥è¶³å¤ è³\87æ\96\99ï¼\88%sï¼\89"
+msgstr "ç\84¡æ³\95ç\94±å\89¯ç¨\8båº\8f pid 管é\81\93è®\80å\8f\96è¶³å¤ è³\87æ\96\99 (%s)"
 
 #: glib/gutf8.c:950
 msgid "Character out of range for UTF-8"