arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3

There is a header for a DB9 serial port, but any attempts to use
hardware handshaking fail.  Enable RTS and CTS pin muxing and enable
handshaking in the uart node.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 0f40b43..02f37dc 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -175,6 +175,7 @@
        pinctrl-0 = <&pinctrl_uart3>;
        assigned-clocks = <&clk IMX8MN_CLK_UART3>;
        assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+       uart-has-rtscts;
        status = "okay";
 };
 
@@ -258,6 +259,8 @@
                fsl,pins = <
                        MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX   0x40
                        MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX   0x40
+                       MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B        0x40
+                       MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40
                >;
        };