tty: Modem functions for the HSO driver
authorDenis Joseph Barrow <D.Barow@option.com>
Fri, 2 Jan 2009 13:47:52 +0000 (13:47 +0000)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 2 Jan 2009 18:19:41 +0000 (10:19 -0800)
Makes TIOCM ioctls for Data Carrier Detect & related functions
work like /drivers/serial/serial-core.c potentially needed
for pppd & similar user programs.

Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/net/usb/hso.c

index 7373fb6..d974d97 100644 (file)
  *             port is opened, as this have a huge impact on the network port
  *             throughput.
  *
- * Interface 2:        Standard modem interface - circuit switched interface, should
- *             not be used.
+ * Interface 2:        Standard modem interface - circuit switched interface, this
+ *             can be used to make a standard ppp connection however it
+ *              should not be used in conjunction with the IP network interface
+ *              enabled for USB performance reasons i.e. if using this set
+ *              ideally disable_net=1.
  *
  *****************************************************************************/
 
@@ -63,6 +66,8 @@
 #include <linux/usb/cdc.h>
 #include <net/arp.h>
 #include <asm/byteorder.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
 
 
 #define DRIVER_VERSION                 "1.2"
@@ -182,6 +187,41 @@ enum rx_ctrl_state{
        RX_PENDING
 };
 
+#define BM_REQUEST_TYPE (0xa1)
+#define B_NOTIFICATION  (0x20)
+#define W_VALUE         (0x0)
+#define W_INDEX         (0x2)
+#define W_LENGTH        (0x2)
+
+#define B_OVERRUN       (0x1<<6)
+#define B_PARITY        (0x1<<5)
+#define B_FRAMING       (0x1<<4)
+#define B_RING_SIGNAL   (0x1<<3)
+#define B_BREAK         (0x1<<2)
+#define B_TX_CARRIER    (0x1<<1)
+#define B_RX_CARRIER    (0x1<<0)
+
+struct hso_serial_state_notification {
+       u8 bmRequestType;
+       u8 bNotification;
+       u16 wValue;
+       u16 wIndex;
+       u16 wLength;
+       u16 UART_state_bitmap;
+} __attribute__((packed));
+
+struct hso_tiocmget {
+       struct mutex mutex;
+       wait_queue_head_t waitq;
+       int    intr_completed;
+       struct usb_endpoint_descriptor *endp;
+       struct urb *urb;
+       struct hso_serial_state_notification serial_state_notification;
+       u16    prev_UART_state_bitmap;
+       struct uart_icount icount;
+};
+
+
 struct hso_serial {
        struct hso_device *parent;
        int magic;
@@ -219,6 +259,7 @@ struct hso_serial {
        spinlock_t serial_lock;
 
        int (*write_data) (struct hso_serial *serial);
+       struct hso_tiocmget  *tiocmget;
        /* Hacks required to get flow control
         * working on the serial receive buffers
         * so as not to drop characters on the floor.
@@ -305,7 +346,7 @@ static void async_get_intf(struct work_struct *data);
 static void async_put_intf(struct work_struct *data);
 static int hso_put_activity(struct hso_device *hso_dev);
 static int hso_get_activity(struct hso_device *hso_dev);
-
+static void tiocmget_intr_callback(struct urb *urb);
 /*****************************************************************************/
 /* Helping functions                                                         */
 /*****************************************************************************/
@@ -1419,25 +1460,217 @@ static int hso_serial_chars_in_buffer(struct tty_struct *tty)
 
        return chars;
 }
+int tiocmget_submit_urb(struct hso_serial *serial,
+                       struct hso_tiocmget  *tiocmget,
+                       struct usb_device *usb)
+{
+       int result;
+
+       if (serial->parent->usb_gone)
+               return -ENODEV;
+       usb_fill_int_urb(tiocmget->urb, usb,
+                        usb_rcvintpipe(usb,
+                                       tiocmget->endp->
+                                       bEndpointAddress & 0x7F),
+                        &tiocmget->serial_state_notification,
+                        sizeof(struct hso_serial_state_notification),
+                        tiocmget_intr_callback, serial,
+                        tiocmget->endp->bInterval);
+       result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
+       if (result) {
+               dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
+                        result);
+       }
+       return result;
+
+}
+
+static void tiocmget_intr_callback(struct urb *urb)
+{
+       struct hso_serial *serial = urb->context;
+       struct hso_tiocmget *tiocmget;
+       int status = urb->status;
+       u16 UART_state_bitmap, prev_UART_state_bitmap;
+       struct uart_icount *icount;
+       struct hso_serial_state_notification *serial_state_notification;
+       struct usb_device *usb;
+
+       /* Sanity checks */
+       if (!serial)
+               return;
+       if (status) {
+               log_usb_status(status, __func__);
+               return;
+       }
+       tiocmget = serial->tiocmget;
+       if (!tiocmget)
+               return;
+       usb = serial->parent->usb;
+       serial_state_notification = &tiocmget->serial_state_notification;
+       if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
+           serial_state_notification->bNotification != B_NOTIFICATION ||
+           le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
+           le16_to_cpu(serial_state_notification->wIndex) != W_INDEX ||
+           le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
+               dev_warn(&usb->dev,
+                        "hso received invalid serial state notification\n");
+               DUMP(serial_state_notification,
+                    sizeof(hso_serial_state_notifation))
+       } else {
+
+               UART_state_bitmap = le16_to_cpu(serial_state_notification->
+                                               UART_state_bitmap);
+               prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
+               icount = &tiocmget->icount;
+               spin_lock(&serial->serial_lock);
+               if ((UART_state_bitmap & B_OVERRUN) !=
+                  (prev_UART_state_bitmap & B_OVERRUN))
+                       icount->parity++;
+               if ((UART_state_bitmap & B_PARITY) !=
+                  (prev_UART_state_bitmap & B_PARITY))
+                       icount->parity++;
+               if ((UART_state_bitmap & B_FRAMING) !=
+                  (prev_UART_state_bitmap & B_FRAMING))
+                       icount->frame++;
+               if ((UART_state_bitmap & B_RING_SIGNAL) &&
+                  !(prev_UART_state_bitmap & B_RING_SIGNAL))
+                       icount->rng++;
+               if ((UART_state_bitmap & B_BREAK) !=
+                  (prev_UART_state_bitmap & B_BREAK))
+                       icount->brk++;
+               if ((UART_state_bitmap & B_TX_CARRIER) !=
+                  (prev_UART_state_bitmap & B_TX_CARRIER))
+                       icount->dsr++;
+               if ((UART_state_bitmap & B_RX_CARRIER) !=
+                  (prev_UART_state_bitmap & B_RX_CARRIER))
+                       icount->dcd++;
+               tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
+               spin_unlock(&serial->serial_lock);
+               tiocmget->intr_completed = 1;
+               wake_up_interruptible(&tiocmget->waitq);
+       }
+       memset(serial_state_notification, 0,
+              sizeof(struct hso_serial_state_notification));
+       tiocmget_submit_urb(serial,
+                           tiocmget,
+                           serial->parent->usb);
+}
+
+/*
+ * next few functions largely stolen from drivers/serial/serial_core.c
+ */
+/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+static int
+hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
+{
+       DECLARE_WAITQUEUE(wait, current);
+       struct uart_icount cprev, cnow;
+       struct hso_tiocmget  *tiocmget;
+       int ret;
+
+       tiocmget = serial->tiocmget;
+       if (!tiocmget)
+               return -ENOENT;
+       /*
+        * note the counters on entry
+        */
+       spin_lock_irq(&serial->serial_lock);
+       memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
+       spin_unlock_irq(&serial->serial_lock);
+       add_wait_queue(&tiocmget->waitq, &wait);
+       for (;;) {
+               spin_lock_irq(&serial->serial_lock);
+               memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
+               spin_unlock_irq(&serial->serial_lock);
+               set_current_state(TASK_INTERRUPTIBLE);
+               if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+                   ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+                   ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
+                       ret = 0;
+                       break;
+               }
+               schedule();
+               /* see if a signal did it */
+               if (signal_pending(current)) {
+                       ret = -ERESTARTSYS;
+                       break;
+               }
+               cprev = cnow;
+       }
+       current->state = TASK_RUNNING;
+       remove_wait_queue(&tiocmget->waitq, &wait);
+
+       return ret;
+}
+
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int hso_get_count(struct hso_serial *serial,
+                         struct serial_icounter_struct __user *icnt)
+{
+       struct serial_icounter_struct icount;
+       struct uart_icount cnow;
+       struct hso_tiocmget  *tiocmget = serial->tiocmget;
+
+       if (!tiocmget)
+                return -ENOENT;
+       spin_lock_irq(&serial->serial_lock);
+       memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
+       spin_unlock_irq(&serial->serial_lock);
+
+       icount.cts         = cnow.cts;
+       icount.dsr         = cnow.dsr;
+       icount.rng         = cnow.rng;
+       icount.dcd         = cnow.dcd;
+       icount.rx          = cnow.rx;
+       icount.tx          = cnow.tx;
+       icount.frame       = cnow.frame;
+       icount.overrun     = cnow.overrun;
+       icount.parity      = cnow.parity;
+       icount.brk         = cnow.brk;
+       icount.buf_overrun = cnow.buf_overrun;
+
+       return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+}
+
 
 static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file)
 {
-       unsigned int value;
+       int retval;
        struct hso_serial *serial = get_serial_by_tty(tty);
-       unsigned long flags;
+       struct hso_tiocmget  *tiocmget;
+       u16 UART_state_bitmap;
 
        /* sanity check */
        if (!serial) {
                D1("no tty structures");
                return -EINVAL;
        }
-
-       spin_lock_irqsave(&serial->serial_lock, flags);
-       value = ((serial->rts_state) ? TIOCM_RTS : 0) |
+       spin_lock_irq(&serial->serial_lock);
+       retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
            ((serial->dtr_state) ? TIOCM_DTR : 0);
-       spin_unlock_irqrestore(&serial->serial_lock, flags);
-
-       return value;
+       tiocmget = serial->tiocmget;
+       if (tiocmget) {
+
+               UART_state_bitmap = le16_to_cpu(
+                       tiocmget->prev_UART_state_bitmap);
+               if (UART_state_bitmap & B_RING_SIGNAL)
+                       retval |=  TIOCM_RNG;
+               if (UART_state_bitmap & B_RX_CARRIER)
+                       retval |=  TIOCM_CD;
+               if (UART_state_bitmap & B_TX_CARRIER)
+                       retval |=  TIOCM_DSR;
+       }
+       spin_unlock_irq(&serial->serial_lock);
+       return retval;
 }
 
 static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
@@ -1479,6 +1712,32 @@ static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
                               USB_CTRL_SET_TIMEOUT);
 }
 
+static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
+                           unsigned int cmd, unsigned long arg)
+{
+       struct hso_serial *serial =  get_serial_by_tty(tty);
+       void __user *uarg = (void __user *)arg;
+       int ret = 0;
+       D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
+
+       if (!serial)
+               return -ENODEV;
+       switch (cmd) {
+       case TIOCMIWAIT:
+               ret = hso_wait_modem_status(serial, arg);
+               break;
+
+       case TIOCGICOUNT:
+               ret = hso_get_count(serial, uarg);
+               break;
+       default:
+               ret = -ENOIOCTLCMD;
+               break;
+       }
+       return ret;
+}
+
+
 /* starts a transmit */
 static void hso_kick_transmit(struct hso_serial *serial)
 {
@@ -1956,7 +2215,10 @@ static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
                serial->shared_int->use_count++;
                mutex_unlock(&serial->shared_int->shared_int_lock);
        }
-
+       if (serial->tiocmget)
+               tiocmget_submit_urb(serial,
+                                   serial->tiocmget,
+                                   serial->parent->usb);
        return result;
 }
 
@@ -1964,6 +2226,7 @@ static int hso_stop_serial_device(struct hso_device *hso_dev)
 {
        int i;
        struct hso_serial *serial = dev2ser(hso_dev);
+       struct hso_tiocmget  *tiocmget;
 
        if (!serial)
                return -ENODEV;
@@ -1992,6 +2255,11 @@ static int hso_stop_serial_device(struct hso_device *hso_dev)
                }
                mutex_unlock(&serial->shared_int->shared_int_lock);
        }
+       tiocmget = serial->tiocmget;
+       if (tiocmget) {
+               wake_up_interruptible(&tiocmget->waitq);
+               usb_kill_urb(tiocmget->urb);
+       }
 
        return 0;
 }
@@ -2338,6 +2606,20 @@ exit:
        return NULL;
 }
 
+static void hso_free_tiomget(struct hso_serial *serial)
+{
+       struct hso_tiocmget *tiocmget = serial->tiocmget;
+       if (tiocmget) {
+               kfree(tiocmget);
+               if (tiocmget->urb) {
+                       usb_free_urb(tiocmget->urb);
+                       tiocmget->urb = NULL;
+               }
+               serial->tiocmget = NULL;
+
+       }
+}
+
 /* Frees an AT channel ( goes for both mux and non-mux ) */
 static void hso_free_serial_device(struct hso_device *hso_dev)
 {
@@ -2356,6 +2638,7 @@ static void hso_free_serial_device(struct hso_device *hso_dev)
                else
                        mutex_unlock(&serial->shared_int->shared_int_lock);
        }
+       hso_free_tiomget(serial);
        kfree(serial);
        hso_free_device(hso_dev);
 }
@@ -2367,6 +2650,7 @@ static struct hso_device *hso_create_bulk_serial_device(
        struct hso_device *hso_dev;
        struct hso_serial *serial;
        int num_urbs;
+       struct hso_tiocmget *tiocmget;
 
        hso_dev = hso_create_device(interface, port);
        if (!hso_dev)
@@ -2379,8 +2663,27 @@ static struct hso_device *hso_create_bulk_serial_device(
        serial->parent = hso_dev;
        hso_dev->port_data.dev_serial = serial;
 
-       if (port & HSO_PORT_MODEM)
+       if (port & HSO_PORT_MODEM) {
                num_urbs = 2;
+               serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
+                                          GFP_KERNEL);
+               /* it isn't going to break our heart if serial->tiocmget
+                *  allocation fails don't bother checking this.
+                */
+               if (serial->tiocmget) {
+                       tiocmget = serial->tiocmget;
+                       tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
+                       if (tiocmget->urb) {
+                               mutex_init(&tiocmget->mutex);
+                               init_waitqueue_head(&tiocmget->waitq);
+                               tiocmget->endp = hso_get_ep(
+                                       interface,
+                                       USB_ENDPOINT_XFER_INT,
+                                       USB_DIR_IN);
+                       } else
+                               hso_free_tiomget(serial);
+               }
+       }
        else
                num_urbs = 1;
 
@@ -2416,6 +2719,7 @@ static struct hso_device *hso_create_bulk_serial_device(
 exit2:
        hso_serial_common_free(serial);
 exit:
+       hso_free_tiomget(serial);
        kfree(serial);
        hso_free_device(hso_dev);
        return NULL;
@@ -2926,6 +3230,7 @@ static const struct tty_operations hso_serial_ops = {
        .close = hso_serial_close,
        .write = hso_serial_write,
        .write_room = hso_serial_write_room,
+       .ioctl = hso_serial_ioctl,
        .set_termios = hso_serial_set_termios,
        .chars_in_buffer = hso_serial_chars_in_buffer,
        .tiocmget = hso_serial_tiocmget,