board: xilinx: Add support for user configurable boot script offset

Currently "script_offset_f" env variable is hardcoded, this variable
specifies from which offset of the flash boot.scr should be read/write.
As flashes are of different sizes having a fixed offset makes it
difficult to load other images into the flash which may overwrite the
boot script or cannot utilize the full memory. This current fix
creates a new config "CONFIG_BOOT_SCRIPT_OFFSET" which holds the
offset address, overwrites the "script_offset_f" variable.
Also removed existing variable with default values, as the default
values are held by CONFIG_BOOT_SCRIPT_OFFSET

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig
index cb272ea..7833b11 100644 (file)
--- a/board/xilinx/Kconfig
+++ b/board/xilinx/Kconfig
@@ -47,3 +47,12 @@ config XILINX_OF_BOARD_DTB_ADDR
        depends on OF_BOARD
        help
          Offset in the memory where the board configuration DTB is placed.
+
+config BOOT_SCRIPT_OFFSET
+       hex "Boot script offset"
+       depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
+       default 0xFC0000 if ARCH_ZYNQ
+       default 0x3E80000 if ARCH_ZYNQMP
+       default 0x7F80000 if ARCH_VERSAL
+       help
+          Specifies distro boot script offset in NAND/NOR flash.

diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c
index 4572447..9fa9e76 100644 (file)
--- a/board/xilinx/versal/board.c
+++ b/board/xilinx/versal/board.c
@@ -203,6 +203,8 @@ int board_late_init(void)
        initrd_hi = round_down(initrd_hi, SZ_16M);
        env_set_addr("initrd_high", (void *)initrd_hi);
 
+       env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
+
        return 0;
 }
 

diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index cffabe8..390d948 100644 (file)
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -76,6 +76,8 @@ int board_late_init(void)
 
        env_set("boot_targets", new_targets);
 
+       env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
+
        return 0;
 }
 

diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index b72eade..8bdc677 100644 (file)
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -667,6 +667,8 @@ int board_late_init(void)
        initrd_hi = round_down(initrd_hi, SZ_16M);
        env_set_addr("initrd_high", (void *)initrd_hi);
 
+       env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET);
+
        reset_reason();
 
        return 0;

diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h
index f426127..dec5001 100644 (file)
--- a/include/configs/xilinx_versal.h
+++ b/include/configs/xilinx_versal.h
@@ -92,7 +92,6 @@
        "kernel_size_r=0x10000000\0" \
        "scriptaddr=0x20000000\0" \
        "ramdisk_addr_r=0x02100000\0" \
-       "script_offset_f=0x7F80000\0" \
        "script_size_f=0x80000\0"
 
 #if defined(CONFIG_MMC_SDHCI_ZYNQ)

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index ee1ceeb..9e08ed5 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -114,7 +114,6 @@
        "kernel_addr_r=0x18000000\0" \
        "scriptaddr=0x20000000\0" \
        "ramdisk_addr_r=0x02100000\0" \
-       "script_offset_f=0x3e80000\0" \
        "script_size_f=0x80000\0" \
 
 #if defined(CONFIG_MMC_SDHCI_ZYNQ)

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 189ca81..22486c0 100644 (file)
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -194,7 +194,6 @@
        "fdt_high=0x20000000\0"         \
        "initrd_high=0x20000000\0"      \
        "scriptaddr=0x20000\0"  \
-       "script_offset_f=0xFC0000\0"    \
        "script_size_f=0x40000\0"       \
        "fdt_addr_r=0x1f00000\0"        \
        "pxefile_addr_r=0x2000000\0"    \