/*
- comedi/drivers/amplc_pci224.c
- Driver for Amplicon PCI224 and PCI234 AO boards.
-
- Copyright (C) 2005 MEV Ltd. <http://www.mev.co.uk/>
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 1998,2000 David A. Schleef <ds@schleef.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
+ * comedi/drivers/amplc_pci224.c
+ * Driver for Amplicon PCI224 and PCI234 AO boards.
+ *
+ * Copyright (C) 2005 MEV Ltd. <http://www.mev.co.uk/>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1998,2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-*/
/*
-Driver: amplc_pci224
-Description: Amplicon PCI224, PCI234
-Author: Ian Abbott <abbotti@mev.co.uk>
-Devices: [Amplicon] PCI224 (amplc_pci224 or pci224),
- PCI234 (amplc_pci224 or pci234)
-Updated: Wed, 22 Oct 2008 12:25:08 +0100
-Status: works, but see caveats
-
-Supports:
-
- - ao_insn read/write
- - ao_do_cmd mode with the following sources:
-
- - start_src TRIG_INT TRIG_EXT
- - scan_begin_src TRIG_TIMER TRIG_EXT
- - convert_src TRIG_NOW
- - scan_end_src TRIG_COUNT
- - stop_src TRIG_COUNT TRIG_EXT TRIG_NONE
-
- The channel list must contain at least one channel with no repeated
- channels. The scan end count must equal the number of channels in
- the channel list.
-
- There is only one external trigger source so only one of start_src,
- scan_begin_src or stop_src may use TRIG_EXT.
-
-Configuration options - PCI224:
- [0] - PCI bus of device (optional).
- [1] - PCI slot of device (optional).
- If bus/slot is not specified, the first available PCI device
- will be used.
- [2] - Select available ranges according to jumper LK1. All channels
- are set to the same range:
- 0=Jumper position 1-2 (factory default), 4 software-selectable
- internal voltage references, giving 4 bipolar and 4 unipolar
- ranges:
- [-10V,+10V], [-5V,+5V], [-2.5V,+2.5V], [-1.25V,+1.25V],
- [0,+10V], [0,+5V], [0,+2.5V], [0,1.25V].
- 1=Jumper position 2-3, 1 external voltage reference, giving
- 1 bipolar and 1 unipolar range:
- [-Vext,+Vext], [0,+Vext].
-
-Configuration options - PCI234:
- [0] - PCI bus of device (optional).
- [1] - PCI slot of device (optional).
- If bus/slot is not specified, the first available PCI device
- will be used.
- [2] - Select internal or external voltage reference according to
- jumper LK1. This affects all channels:
- 0=Jumper position 1-2 (factory default), Vref=5V internal.
- 1=Jumper position 2-3, Vref=Vext external.
- [3] - Select channel 0 range according to jumper LK2:
- 0=Jumper position 2-3 (factory default), range [-2*Vref,+2*Vref]
- (10V bipolar when options[2]=0).
- 1=Jumper position 1-2, range [-Vref,+Vref]
- (5V bipolar when options[2]=0).
- [4] - Select channel 1 range according to jumper LK3: cf. options[3].
- [5] - Select channel 2 range according to jumper LK4: cf. options[3].
- [6] - Select channel 3 range according to jumper LK5: cf. options[3].
-
-Passing a zero for an option is the same as leaving it unspecified.
-
-Caveats:
-
- 1) All channels on the PCI224 share the same range. Any change to the
- range as a result of insn_write or a streaming command will affect
- the output voltages of all channels, including those not specified
- by the instruction or command.
-
- 2) For the analog output command, the first scan may be triggered
- falsely at the start of acquisition. This occurs when the DAC scan
- trigger source is switched from 'none' to 'timer' (scan_begin_src =
- TRIG_TIMER) or 'external' (scan_begin_src == TRIG_EXT) at the start
- of acquisition and the trigger source is at logic level 1 at the
- time of the switch. This is very likely for TRIG_TIMER. For
- TRIG_EXT, it depends on the state of the external line and whether
- the CR_INVERT flag has been set. The remaining scans are triggered
- correctly.
-*/
+ * Driver: amplc_pci224
+ * Description: Amplicon PCI224, PCI234
+
* Author: Ian Abbott <abbotti@mev.co.uk>
+ * Devices: [Amplicon] PCI224 (amplc_pci224 or pci224),
+ * PCI234 (amplc_pci224 or pci234)
+ * Updated: Wed, 22 Oct 2008 12:25:08 +0100
+ * Status: works, but see caveats
+ *
+ * Supports:
+ *
+ * - ao_insn read/write
+ * - ao_do_cmd mode with the following sources:
+ *
+ * - start_src TRIG_INT TRIG_EXT
+ * - scan_begin_src TRIG_TIMER TRIG_EXT
+ * - convert_src TRIG_NOW
+ * - scan_end_src TRIG_COUNT
+ * - stop_src TRIG_COUNT TRIG_EXT TRIG_NONE
+ *
+ * The channel list must contain at least one channel with no repeated
+ * channels. The scan end count must equal the number of channels in
+ * the channel list.
+ *
+ * There is only one external trigger source so only one of start_src,
+ * scan_begin_src or stop_src may use TRIG_EXT.
+ *
+ * Configuration options - PCI224:
+ * [0] - PCI bus of device (optional).
+ * [1] - PCI slot of device (optional).
+ * If bus/slot is not specified, the first available PCI device
+ * will be used.
+ * [2] - Select available ranges according to jumper LK1. All channels
+ * are set to the same range:
+ * 0=Jumper position 1-2 (factory default), 4 software-selectable
+ * internal voltage references, giving 4 bipolar and 4 unipolar
+ * ranges:
+ * [-10V,+10V], [-5V,+5V], [-2.5V,+2.5V], [-1.25V,+1.25V],
+ * [0,+10V], [0,+5V], [0,+2.5V], [0,1.25V].
+ * 1=Jumper position 2-3, 1 external voltage reference, giving
+ * 1 bipolar and 1 unipolar range:
+ * [-Vext,+Vext], [0,+Vext].
+ *
+ * Configuration options - PCI234:
+ * [0] - PCI bus of device (optional).
+ * [1] - PCI slot of device (optional).
+ * If bus/slot is not specified, the first available PCI device
+ * will be used.
+ * [2] - Select internal or external voltage reference according to
+ * jumper LK1. This affects all channels:
+ * 0=Jumper position 1-2 (factory default), Vref=5V internal.
+ * 1=Jumper position 2-3, Vref=Vext external.
+ * [3] - Select channel 0 range according to jumper LK2:
+ * 0=Jumper position 2-3 (factory default), range [-2*Vref,+2*Vref]
+ * (10V bipolar when options[2]=0).
+ * 1=Jumper position 1-2, range [-Vref,+Vref]
+ * (5V bipolar when options[2]=0).
+ * [4] - Select channel 1 range according to jumper LK3: cf. options[3].
+ * [5] - Select channel 2 range according to jumper LK4: cf. options[3].
+ * [6] - Select channel 3 range according to jumper LK5: cf. options[3].
+ *
+ * Passing a zero for an option is the same as leaving it unspecified.
+ *
+ * Caveats:
+ *
+ * 1) All channels on the PCI224 share the same range. Any change to the
+ * range as a result of insn_write or a streaming command will affect
+ * the output voltages of all channels, including those not specified
+ * by the instruction or command.
+ *
+ * 2) For the analog output command, the first scan may be triggered
+ * falsely at the start of acquisition. This occurs when the DAC scan
+ * trigger source is switched from 'none' to 'timer' (scan_begin_src =
+ * TRIG_TIMER) or 'external' (scan_begin_src == TRIG_EXT) at the start
+ * of acquisition and the trigger source is at logic level 1 at the
+ * time of the switch. This is very likely for TRIG_TIMER. For
+ * TRIG_EXT, it depends on the state of the external line and whether
+ * the CR_INVERT flag has been set. The remaining scans are triggered
+ * correctly.
+ */
#include <linux/module.h>
#include <linux/pci.h>
PCI224_DACCON_POLAR_UNI,
};
-/* The hardware selectable Vref*2 external range for PCI234
- * (option[2] == 1, option[3+n] == 0). */
+/*
+ * The hardware selectable Vref*2 external range for PCI234
+ * (option[2] == 1, option[3+n] == 0).
+ */
static const struct comedi_lrange range_pci234_ext2 = {
1, {
RANGE_ext(-2, 2)
}
};
-/* The hardware selectable Vref external range for PCI234
- * (option[2] == 1, option[3+n] == 1). */
+/*
+ * The hardware selectable Vref external range for PCI234
+ * (option[2] == 1, option[3+n] == 1).
+ */
static const struct comedi_lrange range_pci234_ext = {
1, {
RANGE_ext(-1, 1)
},
};
-/* this structure is for data unique to this hardware driver. If
- several hardware drivers keep similar information in this structure,
- feel free to suggest moving the variable to the struct comedi_device struct. */
struct pci224_private {
const unsigned short *hwrange;
unsigned long iobase1;
chan = CR_CHAN(insn->chanspec);
range = CR_RANGE(insn->chanspec);
- /* Writing a list of values to an AO channel is probably not
- * very useful, but that's how the interface is defined. */
+ /*
+ * Writing a list of values to an AO channel is probably not
+ * very useful, but that's how the interface is defined.
+ */
for (i = 0; i < insn->n; i++)
pci224_ao_set_data(dev, chan, range, data[i]);
projects / platform / kernel / linux-rpi.git / commitdiff