--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright (C) 2021, Linaro Limited. All rights reserved.
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/qcom_scm.h>
+
+#define LMH_NODE_DCVS 0x44435653
+#define LMH_CLUSTER0_NODE_ID 0x6370302D
+#define LMH_CLUSTER1_NODE_ID 0x6370312D
+
+#define LMH_SUB_FN_THERMAL 0x54484D4C
+#define LMH_SUB_FN_CRNT 0x43524E54
+#define LMH_SUB_FN_REL 0x52454C00
+#define LMH_SUB_FN_BCL 0x42434C00
+
+#define LMH_ALGO_MODE_ENABLE 0x454E424C
+#define LMH_TH_HI_THRESHOLD 0x48494748
+#define LMH_TH_LOW_THRESHOLD 0x4C4F5700
+#define LMH_TH_ARM_THRESHOLD 0x41524D00
+
+#define LMH_REG_DCVS_INTR_CLR 0x8
+
+struct lmh_hw_data {
+ void __iomem *base;
+ struct irq_domain *domain;
+ int irq;
+};
+
+static irqreturn_t lmh_handle_irq(int hw_irq, void *data)
+{
+ struct lmh_hw_data *lmh_data = data;
+ int irq = irq_find_mapping(lmh_data->domain, 0);
+
+ /* Call the cpufreq driver to handle the interrupt */
+ if (irq)
+ generic_handle_irq(irq);
+
+ return 0;
+}
+
+static void lmh_enable_interrupt(struct irq_data *d)
+{
+ struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d);
+
+ /* Clear the existing interrupt */
+ writel(0xff, lmh_data->base + LMH_REG_DCVS_INTR_CLR);
+ enable_irq(lmh_data->irq);
+}
+
+static void lmh_disable_interrupt(struct irq_data *d)
+{
+ struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d);
+
+ disable_irq_nosync(lmh_data->irq);
+}
+
+static struct irq_chip lmh_irq_chip = {
+ .name = "lmh",
+ .irq_enable = lmh_enable_interrupt,
+ .irq_disable = lmh_disable_interrupt
+};
+
+static int lmh_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+ struct lmh_hw_data *lmh_data = d->host_data;
+
+ irq_set_chip_and_handler(irq, &lmh_irq_chip, handle_simple_irq);
+ irq_set_chip_data(irq, lmh_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops lmh_irq_ops = {
+ .map = lmh_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int lmh_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *cpu_node;
+ struct lmh_hw_data *lmh_data;
+ int temp_low, temp_high, temp_arm, cpu_id, ret;
+ u32 node_id;
+
+ lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL);
+ if (!lmh_data)
+ return -ENOMEM;
+
+ lmh_data->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(lmh_data->base))
+ return PTR_ERR(lmh_data->base);
+
+ cpu_node = of_parse_phandle(np, "cpus", 0);
+ if (!cpu_node)
+ return -EINVAL;
+ cpu_id = of_cpu_node_to_id(cpu_node);
+ of_node_put(cpu_node);
+
+ ret = of_property_read_u32(np, "qcom,lmh-temp-high-millicelsius", &temp_high);
+ if (ret) {
+ dev_err(dev, "missing qcom,lmh-temp-high-millicelsius property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "qcom,lmh-temp-low-millicelsius", &temp_low);
+ if (ret) {
+ dev_err(dev, "missing qcom,lmh-temp-low-millicelsius property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "qcom,lmh-temp-arm-millicelsius", &temp_arm);
+ if (ret) {
+ dev_err(dev, "missing qcom,lmh-temp-arm-millicelsius property\n");
+ return ret;
+ }
+
+ /*
+ * Only sdm845 has lmh hardware currently enabled from hlos. If this is needed
+ * for other platforms, revisit this to check if the <cpu-id, node-id> should be part
+ * of a dt match table.
+ */
+ if (cpu_id == 0) {
+ node_id = LMH_CLUSTER0_NODE_ID;
+ } else if (cpu_id == 4) {
+ node_id = LMH_CLUSTER1_NODE_ID;
+ } else {
+ dev_err(dev, "Wrong CPU id associated with LMh node\n");
+ return -EINVAL;
+ }
+
+ if (!qcom_scm_lmh_dcvsh_available())
+ return -EINVAL;
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret)
+ dev_err(dev, "Error %d enabling current subfunction\n", ret);
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret)
+ dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret)
+ dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret) {
+ dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
+ return ret;
+ }
+
+ ret = qcom_scm_lmh_profile_change(0x1);
+ if (ret) {
+ dev_err(dev, "Error %d changing profile\n", ret);
+ return ret;
+ }
+
+ /* Set default thermal trips */
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_ARM_THRESHOLD, temp_arm,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret) {
+ dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
+ return ret;
+ }
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_HI_THRESHOLD, temp_high,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret) {
+ dev_err(dev, "Error setting thermal HI threshold%d\n", ret);
+ return ret;
+ }
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret) {
+ dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
+ return ret;
+ }
+
+ lmh_data->irq = platform_get_irq(pdev, 0);
+ lmh_data->domain = irq_domain_add_linear(np, 1, &lmh_irq_ops, lmh_data);
+ if (!lmh_data->domain) {
+ dev_err(dev, "Error adding irq_domain\n");
+ return -EINVAL;
+ }
+
+ /* Disable the irq and let cpufreq enable it when ready to handle the interrupt */
+ irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN);
+ ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq,
+ IRQF_ONESHOT | IRQF_NO_SUSPEND,
+ "lmh-irq", lmh_data);
+ if (ret) {
+ dev_err(dev, "Error %d registering irq %x\n", ret, lmh_data->irq);
+ irq_domain_remove(lmh_data->domain);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id lmh_table[] = {
+ { .compatible = "qcom,sdm845-lmh", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, lmh_table);
+
+static struct platform_driver lmh_driver = {
+ .probe = lmh_probe,
+ .driver = {
+ .name = "qcom-lmh",
+ .of_match_table = lmh_table,
+ .suppress_bind_attrs = true,
+ },
+};
+module_platform_driver(lmh_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QCOM LMh driver");
projects / platform / kernel / linux-rpi.git / commitdiff