board: ns3: limit U-boot relocation within 16MB memory

By default relocation happens to a higher address of DDR,
i.e, DDR start + DDR size.

U-Boot shall be used to collect the ramdump.
Restrict U-Boot to use only the 16MB memory, so that this
memory can be reserved. Limit relocation to happen within
16MB memory, start 0xFF00_0000 and end 0x1_0000_0000

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3/ns3.c
index dcdde40..0357cd0 100644 (file)
--- a/board/broadcom/bcmns3/ns3.c
+++ b/board/broadcom/bcmns3/ns3.c
@@ -144,6 +144,11 @@ static int mem_info_parse_fixup(void *fdt)
 
 int board_init(void)
 {
+       /* Setup memory using "memory" node from DTB */
+       if (fdtdec_setup_mem_size_base() != 0)
+               return -EINVAL;
+       fdtdec_setup_memory_banksize();
+
        if (bl33_info->version != BL33_INFO_VERSION)
                printf("*** warning: ATF BL31 and U-Boot not in sync! ***\n");
 
@@ -157,19 +162,30 @@ int board_late_init(void)
 
 int dram_init(void)
 {
-       if (fdtdec_setup_mem_size_base() != 0)
-               return -EINVAL;
+       /*
+        * Mark ram base as the last 16MB of 2GB DDR, which is 0xFF00_0000.
+        * So that relocation happens with in the last 16MB memory.
+        */
+       gd->ram_base = (phys_size_t)(BCM_NS3_MEM_END - SZ_16M);
+       gd->ram_size = (unsigned long)SZ_16M;
 
        return 0;
 }
 
 int dram_init_banksize(void)
 {
-       fdtdec_setup_memory_banksize();
+       gd->bd->bi_dram[0].start = (BCM_NS3_MEM_END - SZ_16M);
+       gd->bd->bi_dram[0].size = SZ_16M;
 
        return 0;
 }
 
+/* Limit RAM used by U-Boot to the DDR first bank End region */
+ulong board_get_usable_ram_top(ulong total_size)
+{
+       return BCM_NS3_MEM_END;
+}
+
 void reset_cpu(ulong level)
 {
        u32 reset_level, strap_val;