omap4: splitting padconfs into common, 4430 and 4460

Not all padconfs are the same between 4430 and 4460, so instead of
working around this with an if, we should have an specific padconf
structure for both chips (like handling the differences between the LEDs
GPIOs and TPS).

Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 6d8811f..2497e3e 100644 (file)
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -152,9 +152,11 @@ static void set_muxconf_regs_essential(void)
                   sizeof(wkup_padconf_array_essential) /
                   sizeof(struct pad_conf_entry));
 
-       /* gpio_wk7 is used for controlling TPS on 4460 */
        if (omap_revision() >= OMAP4460_ES1_0)
-               writew(M3, CONTROL_WKUP_PAD1_FREF_CLK4_REQ);
+               do_set_mux(CONTROL_PADCONF_WKUP,
+                                wkup_padconf_array_essential_4460,
+                                sizeof(wkup_padconf_array_essential_4460) /
+                                sizeof(struct pad_conf_entry));
 }
 
 static void set_mux_conf_regs(void)

diff --git a/arch/arm/cpu/armv7/omap4/omap4_mux_data.h b/arch/arm/cpu/armv7/omap4/omap4_mux_data.h
index 00c52f8..b940391 100644 (file)
--- a/arch/arm/cpu/armv7/omap4/omap4_mux_data.h
+++ b/arch/arm/cpu/armv7/omap4/omap4_mux_data.h
@@ -73,4 +73,11 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = {
 
 };
 
+const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
+
+{PAD1_FREF_CLK4_REQ, (M3)},     /* gpio_wk7, TPS */
+
+};
+
+
 #endif  /* _OMAP4_MUX_DATA_H_ */

diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 9afed80..97320cb 100644 (file)
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -71,9 +71,26 @@ void set_muxconf_regs_non_essential(void)
                   sizeof(core_padconf_array_non_essential) /
                   sizeof(struct pad_conf_entry));
 
+       if (omap_revision() < OMAP4460_ES1_0)
+               do_set_mux(CONTROL_PADCONF_CORE,
+                               core_padconf_array_non_essential_4430,
+                               sizeof(core_padconf_array_non_essential_4430) /
+                               sizeof(struct pad_conf_entry));
+       else
+               do_set_mux(CONTROL_PADCONF_CORE,
+                               core_padconf_array_non_essential_4460,
+                               sizeof(core_padconf_array_non_essential_4460) /
+                               sizeof(struct pad_conf_entry));
+
        do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
                   sizeof(wkup_padconf_array_non_essential) /
                   sizeof(struct pad_conf_entry));
+
+       if (omap_revision() < OMAP4460_ES1_0)
+               do_set_mux(CONTROL_PADCONF_WKUP,
+                               wkup_padconf_array_non_essential_4430,
+                               sizeof(wkup_padconf_array_non_essential_4430) /
+                               sizeof(struct pad_conf_entry));
 }
 
 #ifdef CONFIG_GENERIC_MMC

diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index 63448b6..83d0c3f 100644 (file)
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -100,7 +100,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
        {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},     /* usbb1_hsic_strobe */
        {USBC1_ICUSB_DP, (IEN | M0)},                                   /* usbc1_icusb_dp */
        {USBC1_ICUSB_DM, (IEN | M0)},                                   /* usbc1_icusb_dm */
-       {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},       /* abe_mcbsp2_clkx */
        {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)},             /* abe_mcbsp2_dr */
        {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)},                   /* abe_mcbsp2_dx */
        {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},        /* abe_mcbsp2_fsx */
@@ -202,6 +201,14 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
        {DPM_EMU19, (IEN | M5)},                                        /* dispc2_data0 */
 };
 
+const struct pad_conf_entry core_padconf_array_non_essential_4430[] = {
+       {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},       /* abe_mcbsp2_clkx */
+};
+
+const struct pad_conf_entry core_padconf_array_non_essential_4460[] = {
+       {ABE_MCBSP2_CLKX, (PTU | OFF_EN | OFF_OUT_PTU | M3)},           /* led status_1 */
+};
+
 const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
        {PAD0_SIM_IO, (IEN | M0)},              /* sim_io */
        {PAD1_SIM_CLK, (M0)},                   /* sim_clk */
@@ -214,7 +221,6 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
        {PAD0_FREF_CLK0_OUT, (M2)},             /* sys_drm_msecure */
        {PAD1_FREF_CLK3_REQ, M7},                                       /* safe mode */
        {PAD0_FREF_CLK3_OUT, (M0)},             /* fref_clk3_out */
-       {PAD1_FREF_CLK4_REQ, (PTU | M3)},       /* led status_1 */
        {PAD0_FREF_CLK4_OUT, (PTU | M3)},       /* led status_2 */
        {PAD0_SYS_NRESPWRON, (M0)},             /* sys_nrespwron */
        {PAD1_SYS_NRESWARM, (M0)},              /* sys_nreswarm */
@@ -224,4 +230,8 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
        {PAD1_SYS_BOOT7, (IEN | M3)},           /* gpio_wk10 */
 };
 
+const struct pad_conf_entry wkup_padconf_array_non_essential_4430[] = {
+       {PAD1_FREF_CLK4_REQ, (PTU | M3)},       /* led status_1 */
+};
+
 #endif /* _PANDA_MUX_DATA_H_ */